Academy 1/72 F4F Wildcat WIP

Not too bad at all! Like you never stopped.  Goodluck on your MD-11 training. 

A little update, repainted this thing after the first attempt when the paint flaked off due to bad primer. Bought the Tamiya spray stuff, which I love and is worth the $. I'll never buy Testers acrylic bottled primers again, not worth the frustration. The wing walkways are painted, I'm happy as this is the first model I've painted without ridges in the paint. I heavily thinned the paint with Alcohol (1:1) and at about 10-15 PSI with light coats.

Sunday I will be in Miami for 3 months learning to fly the MD-11 for my new job, I have finally escaped the regional flying rut after 4 years. So I'll have to do the decal work and final weathering when I have a brand new type in December. I used a silver Sharpie for the paint flakes, happy with the results but they're too round. Hope you like it. I also didn't cover up the preshading.

As always, comments questions and suggestions are welcome. Not too bad for my first model in a few years, in my opinion

Looks like you have a nice recovery going there. Trust me , I'm no stranger to stripping down a paint job and redoing it. In fact, I feel as though I've developed it as one of my skills. Not necessarily desired but, a skill nonetheless. Thus, in your case, I believe you will be happy that you chose to do a redo. I'm really excited to watch your base come to fruition. A very clever idea that ought to wield fantastic results. Good Luck on your new postion and training.

I got the Wildcat's paint stripped, reprimed (tamiya) and preshading done before I left for my flying trip. Hope to get it done when I get back in a few days, I got offered a First Officer position flying MD-11s with a class that starts on the 21st, so I want to get this and the C-47 I'm working on done before I leave to learn to fly the Trijet. To elevate the beams I found some foam board that with a few trips of a rolling pin and some boards, I squished it down to the thickness that would let the beams be even with the top of the tin. need to cut the beams then hot glue it all. Time for pics.

So clever with the tin idea.  Thanks so much for sharing it wih us and your build is coming along nicely.

Just a small suggestion to maybe save some time.  Evergreen has styreene that resembles your slated decking in rectangular sheets..not sure on the size. But maybe you can simply cut the sheet for the tin box size you need and voila, a slated deck.

Great work so far, and, I'm intrigued to see how the "Tin" base idea works out!

Great idea with the tin!  

First, sorry for my posts being so photo heavy. I finally got some paint on, but however the primer I used is being very naughty, so I might end up stripping the whole thing and starting over. The paint flaked off in some areas pretty badly, and my desire to give everything the best effort and not accepting half assed work makes want to redo it. I tried for the first time to preshade the panels, which until I saw with my own eyes the effect, I didn't care for, but I think from now on I will do this.

I attempting to scratch build a base that is supposed to be a section of flight deck of an aircraft carrier. I found this square tin at Hobby Lobby for $3, and some square .083" (which I believe is the correct scale width for timber decking on WW2 flight decks) and some light gray paint from a spray can that looked like the correct shade for the hulls of Navy ships. Used all Rustolem enamel spray cans, red/brown rusty metal primer, light gray, and black for the base beneath of the timbers. I'm not sure if someone makes tie down beams, but I'll look around. Also the timbers aren't thick enough, so I have to go back and raise the wood somehow to be even with the top of the lid.

I need to try to somehow weather the wood and the sides, make it resemble a ship, so I'll go to the ship forum and see what others are doing.

Nicely done. Your scratchbuild efforts are quite effective and well executed. Looking forward to some paint going on.

ooooh, nice cratchbuilding on that gear bay. Very clever!

Some nice scratch work there. She is coming on nicley.

This is one of those kits I always seem to put back on the shelf before I leave the hobby shop.  Im really looking forward to the completed build, maybe you'll change my mind so I can purchase it. lol

Great job with the little cockpit, the belts really do make a difference in the added detail.

Mr. 7474,

Your F-4F is looking very nice.

Very cool how you closed up the landing gear bay.   I'll file your solution for future referance if you don't mind because I have an F-6f in the stash.

I, like you, enjoy trying new techniques for the first time . I've been at this for about 2 years now and each model I build employs something I haven't tried before.  Thanks to the good people on here with their myriad of advice , each model is getting better than the one before.  I am struggling through an old monogram 1/48 B-26 kit and every step of the way I 'm receiving great how-to advice.   My "firsts' on this kit include the use of Miliput putty, dealing with difficult fit issues, re-doing raised panel lines,  and the use of extensive PE all completed semi-successfuly with the help of the experts here.   My next new technique to try is pre shading with an air brush . Wish me luck and I do the same for you and the F4-F.

Thanks everyone for the kind words, I really enjoy this hobby. Made some progress. I scratch build some sort of a bulkhead so that when viewed from the top, the landing gear couldn't be seen. I think the Wildcats had a system of gears to retract the landing gear, so using some spare sprue from the tree, I glued some pieces and cut them down to the proper height, also added some pieces to simulate strenghtening stringers, all of this was painted and washed, and using a silver Sharpie, added some chips. The cockpit received a pieces of sprue for an insturment panel and some sort of an electronics box. Also made seatbelts and a harness from masking tape. I know that my efforts are far from accurate, but I was a bit lazy to look at reference photos and I just wanted to make it look better than it was; hopefully my efforts have paid off. Wings and horizontal stabs were attached after the fuselage was closed up. Rescribed what sections of panel lines were erased due to sanding. My most used tools have been the contour gage, silver sharpie (detecting problems in the seams), Mr Surfacer 1000 (still trying to figure out how to properly use it) and Tamiya Extra Thin Cement (which I use to clean up the burs after rescribing). Here are the pics in no particular order.

Next task is prep for paint. I'm going to try to do some preshading. Just because I was out of this for a while, didn't mean I stalked this forum and watched a lot of How to videos on utube. I'm happy with this so far.

A nice start back in the hobby, look forwrad to seeing more.

Thanks guys, hopefully I can build it up to the quality that I've seen from others. I'll keep posting updates. Yeah the PBY is one of my favorites :D Would love to fly that instead of the stupid regional jet that I'm stuck in.

Welcome back to the hobby and welcome to the forums. Appears to me that you're off to an excellent start. Good work on dressing up the seat. Yeah, it sure is easy to drop a healthy load of cash on tools, paints, gizmos, etc.... so that we can thoroughly enjoy our styrene habit. You're doing great. Keep it coming.

By the way, I love your avatar. I love the PBY. My father flew it during and after the war.

Welcome back sir, it seems you still have the touch after all these years.

Toshi

Nice detail painting so far, not easy on 1/72 scale. I'll be following this one for sure.

Looks like you're quickly getting the groove back. Great work so far!