SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Panel lines for dark aircraft?

744 views
10 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2015
Panel lines for dark aircraft?
Posted by Cat Daddy on Monday, November 9, 2015 6:10 PM

I'm building this:

which has a semi-gloss black paint job. If I wanted panel lines on it, how best to reproduce that effect? I'm assuming black artist's oils would be lost in the overall paint scheme.

  • Member since
    September 2012
Posted by GMorrison on Monday, November 9, 2015 6:17 PM

You'll have predicted this comment was coming, so I'll keep it short.

An extremely well maintained aircraft that didn't see combat in that scheme. I wouldn't bother.

To "modulate" the finish a little, maybe spray the middle areas, on the top surfaces, of each "panel" with a blob of only very slightly a little bit lighter black.

 Modeling is an excuse to buy books.

 

  • Member since
    August 2015
Posted by Cat Daddy on Monday, November 9, 2015 6:23 PM

I'll take that answer. Thanks. It makes my painting job that much easier and a nice break after doing my first camoflage job.

GAF
  • Member since
    June 2012
  • From: Anniston, AL
Posted by GAF on Tuesday, November 10, 2015 12:51 AM

GM is correct.

Another variation is to paint the aircraft a lighter "black / charcoal grey" and then use the darker color for shading.  I think Lawdog did a P-61 in this fashion and it looked great.

http://cs.finescale.com/fsm/modeling_subjects/f/2/t/168128.aspx

  • Member since
    August 2015
Posted by Cat Daddy on Tuesday, November 10, 2015 11:46 AM

That P-61 does look great. Probably beyond my Jedi powers at the moment. For this project, I'm going to go with shiny show-plane. I will keep your advice in mind for a future project and I appreciate the pointer to the P-61.

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Tuesday, November 10, 2015 5:25 PM

 the suggestions offered are good. You can also use the dark Grime Flory wash over the black.

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Tuesday, November 10, 2015 6:28 PM

I agree to all above but keep in mind that dirt and grime is flat and depends where the plane is stationed

 

 

 Nick.

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Tuesday, November 10, 2015 7:13 PM

Aircraft get dirty no matter where they are stationed, specially under combat operational conditions.

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Tuesday, November 10, 2015 7:41 PM

Absolutely

 

 

 Nick.

  • Member since
    November 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Wednesday, November 11, 2015 9:09 AM

Cat Daddy

That P-61 does look great. Probably beyond my Jedi powers at the moment. For this project, I'm going to go with shiny show-plane. I will keep your advice in mind for a future project and I appreciate the pointer to the P-61.

 

Show planes in particular are kept clean, and you are unlikely to see panel lines anyway.  If it is a fabric covered plane like a stearman, there are few panels, in any case .

Don Stauffer in Minnesota

  • Member since
    February 2003
Posted by Jim Barton on Wednesday, November 11, 2015 4:16 PM

Link doesn't work.

"Whaddya mean 'Who's flying the plane?!' Nobody's flying the plane!"

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.