There are a couple of thingss to fix on the eduard kit. The landing gear legs are a bit too long. The axle wing (PP A 6, 7, B 13 ) and wheel (PP B 9 X 2) assemblies. Sand off the details on the underside of the axle wing ( PP A 7 ). With the wing axle mid section (PP B 13) I routed out the plastic axle and replaced it with a brass rod of appropriate diameter. Next before adding the landing gear legs (PP C 15, 20 37 & 41 ) to the wing axle (PP A 6, 7, B 13 ) cut the legs down approx 1/16 of an inch on all four legs.
The clear inspection window in the top wing needs to be drastically relocated to a point where it would actually be represented as being over the wing spar. No raise edge either. How they got this wrong is still a mystery to most WWI aviation kit builders.
Also the “Bosch” staring magneto (PE 4) should not be added to this build. Since you have the Weekend kit this won't matter but anyone that has the Photoetch in their kits - heads up. The rotary engine starting magneto is represented by the rounded plate at the pilot’s left already molded to the fuselage.