SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Fokker Spin 1/72 Scratch Build

2036 views
56 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October, 2011
  • From: Guatemala
Fokker Spin 1/72 Scratch Build
Posted by Adrian Urrejola on Sunday, November 05, 2017 11:33 AM

I already finished the model and it took me about 6 months and in the end of this day I will upload all the photos to show it. Thanks.

 

Here is a drawing of the real plane (internet source)

 

  • Member since
    October, 2011
  • From: Guatemala
Posted by Adrian Urrejola on Sunday, November 05, 2017 11:35 AM
  • Member since
    October, 2011
  • From: Guatemala
Posted by Adrian Urrejola on Sunday, November 05, 2017 11:43 AM

The material will be used for the main structure:

a) Rods .05 millimeters iron

b) orthodontic 29,30,31 G needles

c) square and round rods

d) Other gauges slightly thicker rods

e) Human Hair for wiring and to prevent resize it wet before putting

To make tensors: a) Short very small needle (1 millimeter) 

Wet human hair was used because it was thin enough for the needle duct

I use needle 29 - 30 - 31 gauge.

  • Member since
    October, 2011
  • From: Guatemala
Posted by Adrian Urrejola on Sunday, November 05, 2017 11:55 AM

 

 

 

 

  • Member since
    October, 2011
  • From: Guatemala
Posted by Adrian Urrejola on Sunday, November 05, 2017 12:03 PM

 

It has approximately 200 tensors in total counting the wings

 

 

For the structure of the tail I leave the holes for wiring

  • Member since
    October, 2011
  • From: Guatemala
Posted by Adrian Urrejola on Sunday, November 05, 2017 12:11 PM

To make the radiator:

To make the chair:

To make the rudder:

To make the gas tank:

The elements already mounted

  • Member since
    October, 2011
  • From: Guatemala
Posted by Adrian Urrejola on Sunday, November 05, 2017 12:17 PM

The parts for the engine:

the complete engine

 

  • Member since
    July, 2012
  • From: Douglas AZ
Posted by littletimmy on Sunday, November 05, 2017 12:19 PM

WOW!!! That is some delicate work!

Hard to believe that a man could actually get off the ground in something so flimsy.

 Dont worry about the thumbprint, paint it Rust , and call it "Battle Damage".

  

 

    

  • Member since
    October, 2011
  • From: Guatemala
Posted by Adrian Urrejola on Sunday, November 05, 2017 12:23 PM

Thank you very much for your words, littletimmy!! 

  • Member since
    October, 2011
  • From: Guatemala
Posted by Adrian Urrejola on Sunday, November 05, 2017 12:48 PM

The final Result!!

  • Member since
    October, 2011
  • From: Guatemala
Posted by Adrian Urrejola on Sunday, November 05, 2017 1:01 PM

 

  • Member since
    October, 2011
  • From: Guatemala
Posted by Adrian Urrejola on Sunday, November 05, 2017 1:13 PM

 

  • Member since
    January, 2004
  • From: Brisbane Australia
Posted by ChrisJH666 on Sunday, November 05, 2017 1:59 PM

That is truly awesome! I am used to some incredible scratchbuilding in model railways, but I've never seen anything like this in model aircraft. That is a model to be really proud of if ever I saw one Bow Down

In the queue: 1/48 Spitfire Vb (Malta), Spitfire VIII x2 (RAAF), P39 x2 (RAAF), P43 Lancer (RAAF), Martin Maryland (Malta), Typhoon NF1b

 

Chris

  • Member since
    March, 2017
  • From: Mid Michigan
Posted by shamoo on Sunday, November 05, 2017 2:34 PM

Wow. Amazing!

  • Member since
    April, 2013
  • From: Eleva, Wisconsin
Posted by Greatmaker on Sunday, November 05, 2017 2:58 PM

Fantastic job Amazing talent on display. Thanks for sharing 

The Pe-2 has HOW many parts????

  • Member since
    October, 2011
  • From: Guatemala
Posted by Adrian Urrejola on Sunday, November 05, 2017 3:59 PM
Thank you for all your comments, I have read all and I also feel a great resemblance to this forum and its members, thank you very much!!.
  • Member since
    September, 2016
  • From: Albany, New York
Posted by ManCityFan on Sunday, November 05, 2017 4:08 PM

Wow!!  That is some delicate work.  Incredibly well done.  Bow Down

Dwayne or Dman or just D.  All comments are welcome on my builds. 

 

  • Member since
    October, 2016
  • From: Somewhere in Ohio...
Posted by DasBeav on Sunday, November 05, 2017 4:19 PM

A true work of art, sir. I have neither the skill or the patience to even attempt such a build. I would love to see more of your work. I am truly impressed.Bow Down

 Sooner Born...Buckeye Bred.

 

  • Member since
    September, 2017
  • From: western North Carolina
Posted by kensar on Sunday, November 05, 2017 6:19 PM

I am truly impressed with how you used everyday items to scratchbuild this model.

I salute you.

 

Kensar

 

  • Member since
    May, 2013
  • From: Indiana, USA
Posted by Greg on Sunday, November 05, 2017 7:28 PM

Amazing, just as everyone has said.

You are a true craftsman, sir. 

YesYesYesYes

-Greg

  • Member since
    December, 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Monday, November 06, 2017 2:13 AM

Can't add much more than whats been said. Simply stunning.

''I am a Norfolk man, and i glory in being so''

 

On the bench: Esci 1/72nd MiG 29 (Aircraft of the Commonwealth GB)

  • Member since
    March, 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Monday, November 06, 2017 2:22 AM

I’m with Bish!

Your friend, Toshi

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

On the Bench: Revell 1/48 F-102A Delta Dagger (A kit Mrs. Toshi purchased for me at Hobby Lobby)

  • Member since
    November, 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Monday, November 06, 2017 8:40 AM

Looks great!

You should post something on this project in the Scratchbuilding forum.  Some of the materials you are using are really unique- was unaware of anyone using some of those materials.

Don Stauffer in Minnesota

  • Member since
    June, 2014
Posted by BrandonK on Monday, November 06, 2017 9:01 AM

This is truly what modeling is all about. Fantastic work of art. Your skills are extraordinary.

BK

On the bench: 2x Monogram 1/48 Kingfishers with cockpits and floats, full kit overhauls each

1/32 Kitty Hawk OS2U Kingfisher

  • Member since
    December, 2003
  • From: 37deg 40.13' N 95deg 29.10'W
Posted by scottrc on Monday, November 06, 2017 9:57 AM

WOW!!!!!

Thats all I cna sayBig Smile

  • Member since
    August, 2013
Posted by Jay Jay on Monday, November 06, 2017 10:31 AM

Unbelievable patience and superb skill, To actually make every part for a model just blows my mind.

 

 

 

 

 

 I'm finally retired. Now time I got, money I don't.

GAF
  • Member since
    June, 2012
  • From: Anniston, AL
Posted by GAF on Monday, November 06, 2017 12:09 PM

That really is a fantastic creation.  Are you a watchmaker or jeweler by trade?

(I see by your profile you are a Systems Engineer.)

Gary

  • Member since
    September, 2006
  • From: Bethlehem PA
Posted by the Baron on Monday, November 06, 2017 12:25 PM

The bigger the government, the smaller the citizen.

 

http://img.photobucket.com/albums/v233/HansvonHammer/Humor/th_MonogramMafia.jpg?t=1296972087~original

  • Member since
    October, 2011
  • From: Guatemala
Posted by Adrian Urrejola on Monday, November 06, 2017 1:15 PM
It is very gratifying to receive all the messages that you have given me. Thanks !!!, I appreciate it. I will be visiting to know more about you and while we keep in touch ... Thanks
  • Member since
    January, 2016
  • From: A Galaxy Far, Far Away
Posted by Hunter on Monday, November 06, 2017 3:13 PM

Adrian,

Immensely impressive sir!! I don't have the words to describe your scratchbuilding skills. Outstanding work Adrian Bow Down

Hunter 

      

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS

FREE NEWSLETTER