SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Halberstadt CL.II 'Marianne,' 1918 (Mirage 1-48) --DETAIL PHOTOS ADDED--

2508 views
17 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2003
  • From: Towson MD
Posted by gregbale on Friday, April 27, 2018 11:00 PM

jeaton01

Well done, Greg.  Decal work is very nice.

Thanks, John.

Greg

George Lewis:

"Every time you correct me on my grammar I love you a little fewer."
 
  • Member since
    March 2003
  • From: Towson MD
Posted by gregbale on Friday, April 27, 2018 10:58 PM

1943Mike

Excellent work all around. The detailing, the decals, paint, PE, scratch, etc.

Just out of curiousity, why the three different items (nylon sewing thread, stretched sprue, and EZ Line) for rigging? Would EZ Line not have worked for everything?

Thanks, Mike.

Yes, EZ-Line would certainly have worked for everything. I love the stuff, and it's pretty much all I use for 1/32 scale birds.

For 1/48, however, the invisible thread is just closer to scale. And it is literally the largest line that will fit through the AWG 31 tubing, which is pretty close to scale for the turnbuckles.

I did use EZ-Line for the undercarriage, simply because it resists the natural flexing that seems to occur there during my build process. In the past I've had both the nylon thread and monofilament get stretched just enough to go slack. Monofilament can sometimes be tightened up again with heat...but the nylon thread, if heated, actually just gets more slack.

As for the stretched sprue...it was just quicker and easier. None of the tail lines was any more than about 1/4"...so cutting all the sections and attaching them with white glue took all of about a minute and a half.

Thanks for your interest and kind words.

Greg

George Lewis:

"Every time you correct me on my grammar I love you a little fewer."
 
  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Friday, April 27, 2018 10:34 PM

Well done, Greg.  Decal work is very nice.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    December 2010
  • From: Salem, Oregon
Posted by 1943Mike on Friday, April 27, 2018 10:05 PM

Excellent work all around. The detailing, the decals, paint, PE, scratch, etc.

Just out of curiousity, why the three different items (nylon sewing thread, stretched sprue, and EZ Line) for rigging? Would EZ Line not have worked for everything?

Mike

"Le temps est un grand maître, mais malheureusement, il tue tous ses élèves."

Hector Berlioz

  • Member since
    March 2003
  • From: Towson MD
Posted by gregbale on Friday, April 27, 2018 9:37 PM

Griffin25

That looks awesome! Great work.With the camera even. Sweet. Can't get enough WW1 stuff. Is Mirage that company from Poland? 

Correct. I've done a number of their 1/400 ships...I particularly love their line of 'four stacker' destroyers...but this is the only one of their planes I've ever done. (Actually not sure how many a/c they've done...though I know they've released the CL.II in several versions. I think they've also done the CL.IV)

Thanks for your comment!

Greg

George Lewis:

"Every time you correct me on my grammar I love you a little fewer."
 
  • Member since
    May 2015
Posted by Griffin25 on Friday, April 27, 2018 7:18 PM

That looks awesome! Great work.With the camera even. Sweet. Can't get enough WW1 stuff. Is Mirage that company from Poland? 

 

 

Griffin

  • Member since
    March 2003
  • From: Towson MD
Posted by gregbale on Friday, April 27, 2018 6:50 PM

Thanks Templar, Jim and Timmy!

Greg

George Lewis:

"Every time you correct me on my grammar I love you a little fewer."
 
  • Member since
    July 2012
  • From: Douglas AZ
Posted by littletimmy on Friday, April 27, 2018 6:36 PM

Man, I like it !

It look's "busy", just sitting there ! Nice job !

 Dont worry about the thumbprint, paint it Rust , and call it "Battle Damage"

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Friday, April 27, 2018 4:34 PM

Very well done! Toast Toast Toast

Jim  Captain

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

  • Member since
    December 2015
  • From: providence ,r.i.
Posted by templar1099 on Friday, April 27, 2018 9:19 AM

Absolutely gorgeous.

"le plaisir delicieux et toujours nouveau d'une occupation inutile"

  • Member since
    March 2003
  • From: Towson MD
Posted by gregbale on Friday, April 27, 2018 6:29 AM

Thanks to all for your kind words!

Greatmaker

Fantastic job. That camo pattern makes me dizzy just looking at it.  That’s gotta take an amazing amount of patience 

 

The real Halberstadts were painted at the factory with a singular 'mottle' of the same colors used in the familiar lozenge camouflage fabric. That painted finish was patterned in segments that were basically larger free-form versions of the lozenges. Fortunately, the Mirage kit supplied decals to replicate the finish:
 
 
Since Mirage decals tend to be a bit finicky...and since the fuselage contours are all compound curves...I applied the decals in sections (over a slightly-grained 'plywood' color basecoat):
 
 
Fortunately the mottle pattern segments were large enough that with a little care and forethought I could 'match' the pattern pretty well where decal edges met:
 
 
For the 'proper' lozenge camouflage on wings and tail surfaces, I used some of my dwindling supply of the lovely old decals from MicroSculpt. I believe they date back a decade or so, but they went down flawlessly, no difficulties beyond nearly going blind cutting and applying the tiny strips for the wing rib tapes!
 
Thanks again to all for your interest.

Greg

George Lewis:

"Every time you correct me on my grammar I love you a little fewer."
 
  • Member since
    January 2004
  • From: Brisbane Australia
Posted by ChrisJH666 on Friday, April 27, 2018 5:35 AM

Very impressive!

In the queue: 1/48 Beech Staggerwing (RAAF), P38 (RAAF), Vultee Vengeance (RAAF), Spitfire Vb (Malta), Spitfire VIII x2 (RAAF), P39 x2 (RAAF), Martin Baltimore (Malta?), Martin Maryland (Malta), Typhoon NF1b, Hellcat x2 (FAA)

 

Chris

  • Member since
    April 2013
Posted by KnightTemplar5150 on Friday, April 27, 2018 12:51 AM
Sweet build, Greg - very striking camouflage scheme!
  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Friday, April 27, 2018 12:46 AM

Toast Beautiful! That looks super!

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    April 2013
  • From: Eleva, Wisconsin
Posted by Greatmaker on Thursday, April 26, 2018 10:09 PM

Fantastic job. That camo pattern makes me dizzy just looking at it.  That’s gotta take an amazing amount of patience 

 

  • Member since
    April 2007
  • From: Amarillo, TX.
Posted by captfue on Thursday, April 26, 2018 9:22 PM

Great build, fantastic details....

Rules are overrated
  • Member since
    August 2012
  • From: Parker City, IN.
Posted by Rambo on Thursday, April 26, 2018 8:37 PM
I know nothing about WWI aircraft but that looks beautiful, great job.

Clint

  • Member since
    March 2003
  • From: Towson MD
Halberstadt CL.II 'Marianne,' 1918 (Mirage 1-48) --DETAIL PHOTOS ADDED--
Posted by gregbale on Thursday, April 26, 2018 8:33 PM

This is Mirage's petite and capricious Halberstadt CL.II 'early' in the colors of Schlachtstaffel 23b, ca. March 1918. Though lesser known than similar types on the Allied side, the Halberstadt was roughly comparable in many ways to the Bristol F.2B: a two-seater with performance close to that of a fighter, nimble and versatile and with a 'sting in the tail' to surprise the unwary opponent.

Mirage's kit is well-molded and with generally excellent detail and fit...albeit with the company's equally-rather characteristic challenges of awkward-to-clean-up sprue attachments and truly chaotic instructions. In addition to the plastic, there was a so-so sheet of photo-etched goodies, and a clear sheet with instrument gauge faces. Definitely not a 'shake the box' kit, but well-worth the time and effort to show it some TLC.

Please enjoy.

I forgot to do a 'stock' shot of the finished build with a penny for size reference, but here she is before her upper wing went on:

And a few detail shots.

Added an old Copper State resin recon camera from the stash, since the kit floor (like the real thing) had a cutout for same:

And the finished cockpit structure, with camera and wireless mounted:

The kit supplied racks for the grenades often carried on the cockpit sides of these a/c, but Mirage does the grenades only as part of a larger (and more expensive) weapons set. I opted to make my own up from bits of rod, sheet scrap and tubing sections:

And a last shot of a neat detail, the wing-mounted compass.

Rigging was off-the-shelf 'invisible' nylon sewing thread for wing wires, stretched sprue for tail lines, and EZ-Line for the undercarriage. Turnbuckles are tiny sections of polyimide tubing (the same amber-colored stuff seen in the photo above).

Greg

George Lewis:

"Every time you correct me on my grammar I love you a little fewer."
 
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.