SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Eduard 1/48 Albatros D.V

1732 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2010
  • From: Salem, Oregon
Posted by 1943Mike on Thursday, December 27, 2018 2:21 PM

John and Mike,

Thank you both for your kind comments.

Mike

"Le temps est un grand maître, mais malheureusement, il tue tous ses élèves."

Hector Berlioz

  • Member since
    September 2018
  • From: Monroe, North Carolina
Posted by Papa Bear on Thursday, December 27, 2018 12:05 PM

The Albatros D.V is one of my favorite WWI fighters and I think this is a sweet looking model. I really like your wood finish and Lt. Böning's color scheme.

Best regards,

Mike

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Wednesday, December 26, 2018 11:48 PM

Looks very nice here, as well.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    December 2010
  • From: Salem, Oregon
Posted by 1943Mike on Wednesday, December 26, 2018 10:16 PM

Thanks Mopar and Theuns!

I suppose that what little skill I may have begun to learn is the painting of the sections/panels of the fuselage to look like wood. Not there yet but have gained some experience. I must tell you though that the water soluable oil paints I used (burnt umber and burnt sienna) over the acrylic base color (Model Master "wood") took the best part of two weeks before drying enough for me to continue the build. Really frustrating for someone like me who doesn't always have the patience to wait that long.

Mike

"Le temps est un grand maître, mais malheureusement, il tue tous ses élèves."

Hector Berlioz

  • Member since
    April 2010
Posted by Theuns on Wednesday, December 26, 2018 9:58 PM

Thatr is a very sleek looking model you built, I lik the wood effect on the engine bearer and fuselage.

I have the rebox of that same kit from revell (without all the PE) asnd will also start that soon. 

Strangely I also have a WnW S5 in the stash for years now but never can bring myself to build it, not that it will  be difficult but rather because it being the jewel in my collection and I know its quality can not be surpassed LOL

 

Theuns

  • Member since
    April 2015
Posted by Mopar Madness on Sunday, December 23, 2018 10:03 PM

You have the patience of a saint.  I’m pretty sure I’d tossed it after parts started breaking! But, your patience is justly rewarded with a superb build! 

Chad

God, Family, Models...

At the plate: 1/48 Airfix Bf109 & 1/35 Tamiya Famo

On deck: Who knows!

  • Member since
    December 2010
  • From: Salem, Oregon
Posted by 1943Mike on Sunday, December 23, 2018 9:36 PM

Thanks Stik!

I wouldn't go as far as "..turned out beautifully." but I appreciate the comment anyway and I just hope my next build goes more smoothly.

Mike

"Le temps est un grand maître, mais malheureusement, il tue tous ses élèves."

Hector Berlioz

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Sunday, December 23, 2018 9:04 PM

Mishaps notwithstanding, this turned out beautifully. I can imagine some folks tossing such a build into a wall after such speed bumps.... Nice recovery and excellent perserverence!

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    December 2010
  • From: Salem, Oregon
Eduard 1/48 Albatros D.V
Posted by 1943Mike on Sunday, December 23, 2018 8:01 PM

This model represents Ltn. Walter Böning's mount, Jasta 76b, early 1918. He had a total of 17 kills but was wounded on May 30th, 1918 while recovering from having had a minor collision in the middle of a dogfight. He was able to recover and land at his airfield but did not survive the injuries.

I grow weary of mistakes, accidents, and just plain sloppy work. I wish I could say that I have hope that I'll become better at being neat - unfortunately, no way.

I started out OK - my usual build skills as meager as they are were serving me well until I misread the instructions and cut a square hole in the port side ... LOL! The instructions show the square in a salmon color with the symbol of a knife. Back on page two the symbols are represented and defined. The knife symbol says: "Remove". Of course what the instructions mean is to remove the "lip" around that square, NOT cut out the square ... duh. I must have been off on one of my Walter Mitty daydreams at the time. C'est la vie. So I put a patch in its place and I figured I'd call it battle damage.

Then, after having come along toward the finish with all the rigging done, I dropped the model from the work table I use to work on my models. I do have carpet in my hobby room but, as luck would have it, the top wing came off, one of the interplane struts broke in half and one of the cabane struts had a spar broken off toward the bottom wing. Also the foot lever (not sure what it did) fell out. I just couldn't find a way to put it back in. At that point I'd already broken off the tail skid a couple of times and had begun to get too much glue every where I'd broken something and had to reglue it. I was frustrated so I put the remains in the box and figured I'd throw the box in the trash. Then I thought how I'd learned a thing or two on this model and had put in some time so, even with all the flaws, I rescued it from the box of death (trash).

It's not pretty folks but I like the looks of the aircraft and it may inspire me to build my Wingnut Wings Baron von Richthofen D.V sooner rather than later.

 

Mike

"Le temps est un grand maître, mais malheureusement, il tue tous ses élèves."

Hector Berlioz

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.