Good cheap 1/48 Aircraft Models

laskdjn

Raised panel lines are not a deal breaker, I just don't know how to reconstruct them after sanding

 

If it is a simple straight panel line, some hair thin stretched sprue can be used as a replacement. Any other ones can usually be replaced with scribing for a mix of raised and recessed detail. In that case, replace the whole panel line instead of just a portion. Scribing templates come in handy for replacing lost small access panels, doors, fuel points, etc. There are also decals available for raised rivets and things like piano style hinge detail. It all depends upon how intricate you want to get.

Raised panel lines are not a deal breaker, I just don't know how to reconstruct them after sanding

laskdjn

 

 

stikpusher

Well, Revell makes a super F-15E in 1/48. But it is a new tool kit and a tad more costly and complex than their older kits. 

But seriously, the more I think of it, for a late Cold War jet, Academy’s F-16 that I suggested earlier is probably the best bargain for the money that fits your criteria.

 

 

 

 

 

I will be purchasing that shortly.   Any others you can think of? 

 

Monogram Century Series kits. If your not aghast at raised panel lines, they are gorgeous kits. Varying degrees of fit finesse, very well detailed in the cockpits and other interior areas, full basic weapons loads, but again, good values of bang for the buck. Again I would suggest looking for older boxing’s for a better fit due to newer molds.

stikpusher

Well, Revell makes a super F-15E in 1/48. But it is a new tool kit and a tad more costly and complex than their older kits. 

But seriously, the more I think of it, for a late Cold War jet, Academy’s F-16 that I suggested earlier is probably the best bargain for the money that fits your criteria.

 

I will be purchasing that shortly.   Any others you can think of? 

Well, Revell makes a super F-15E in 1/48. But it is a new tool kit and a tad more costly and complex than their older kits. 

But seriously, the more I think of it, for a late Cold War jet, Academy’s F-16 that I suggested earlier is probably the best bargain for the money that fits your criteria.

Thank you for all the great tips.   I was getting ready to start a great wall hobby f-15e and as I was looking at it, I thought to myself... I'm not ready for this, I need more practice. 

So, I was primarily looking for examples of kits that I wouldn't feel bad screwing up,  but were good enough to give me sufficient practice. 

One post Vietnam era kit that fits the criteria is Academy’s 1/48 F-16. It builds easy, fits well, is reasonably accurate, and is usually very affordably priced. It offers a late A or early C options so is in the 80’s era, if that’s not too modern. There are aftermarket decal options available if you don’t care for the kit markings.

JohnnyK

Hobby Lobby has a 40% off coupon. Just show it to the cashier.

 

The downside is that Hobby Lobby has a very thin selection of 1/48 jets.  

If you have access to a model show, you can get some real bargains. I restock only once a year at the IPMS show in Orlando ,Florida

Hobby Lobby has a 40% off coupon. Just show it to the cashier.

Cheap is a relative term. I've found Monogram and Revell models for under $20 at Michael's...SR-71, F-100, F-105. For a good Academy F-4C Phantom, I think I paid near $70 for it at a hobby store. Others I got on eBay or other online store for $20-25 plus shipping...Testors OV-10 Bronco, Italeri O-2. I kit bashed a UH-1F from a $10 Monogram Huey Hog Gunship and an Italeri UH-1D I got from a club for a swap of another model. You can add a few aftermarket details or a nice paint job, or special decals and unique add-ons to make that 'silk purse' out of an inexpensive model. It's just about how much trouble you want to go to or the skills you have.

Don Stauffer

I would add Airfix.  Even their older stuff is not that bad, and the new stuff is a good bargain.  Excellent kits at reasonable prices.  My understanding is that manufacturers who do large production runs can afford new mold technology.  I love the molded detail on the recent Revell stuff.

 

 

Airfix just does not do much Vietnam era stuff in 1/48. Their B-57 and EA-6B are the only kits that I can think of off the top of my head in 1/48. Oh yeah, their rebox of the Smer MiG-17 also...

I would add Airfix.  Even their older stuff is not that bad, and the new stuff is a good bargain.  Excellent kits at reasonable prices.  My understanding is that manufacturers who do large production runs can afford new mold technology.  I love the molded detail on the recent Revell stuff.

Tojo72

Check out Revell and Monogram kits.

 

To add on to this, look for secondhand kits of the original releases of these. The molds were new, the fit will be better when compared to current boxings  of these same kits. The decals may need replacement, but you’re far less likely to have many of the problems related to old molds. 

Look for stuff on sale online. Don't shrug off Amazon either.