SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

FINISHED -- Revell 1/48 Blackbird SR-71

5213 views
11 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2015
  • From: Close to Chicago
FINISHED -- Revell 1/48 Blackbird SR-71
Posted by JohnnyK on Thursday, March 24, 2022 3:08 PM

Well, I finally finished this beast. The new Revell Blackbird is a Revell of Germany kit.  I purchased my kit on ebay in January from an on-line hobby store in England called  Jumblies Models I paid $90.00 for the kit. I am not sure if this kit has been officially released in the U.S.

This is one big model. The kit is composed of 207 parts and it takes a while to build this puppy.

The model was painted with Tamyia Rubber Black and weathered with Aqualine weathering products. My opinion is that Rubber Black is a closer match to the actual weathered aircraft color than straight black paint. 

 

After the Rubber Black paint dried, I coated the model with a couple coats of Model Master Gloss Clear as a base for the decals. I used Tamyia Mark Fit decal setting solution. The result was minimal silvering.

 After appling the decals I painted the model with Tamyia Clear Matt. The actual planes became very weathered, so I weathered the model with Aqualine weathering products to enhance the molded in details.  These products are water based and are easy to use. Unfortunetly, they are no longer available.

Unlike previous Blackbird kits, this kit's landing gears and wheel wells have a nice amount of detail. 

I didn't like the appearance of the seats that were included in the kit, so I purchased seats from Aires. They look nice when the canopies are off, but when the canopies are installed the seats are barely visible (see photo above).

The Blackbird makes a nice companion to the B-58 Hustler.

Two pair of engines are included in the kit. The engines that are installed in the model only include the front compressor blades and the rear turbine blades and the exhaust pipe. A second pair of engines are included that are complete and are super detailed. The kit includes a stand for displaying the finished model and a cradle for the engines. This is a very well done kit with outstanding molded in details. It has some glitches, but all model kits do. The final result is an outstanding looking and unique model aircraft. I highly recommend this kit.

 

 

 

 

 

Your comments and questions are always welcome.

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Thursday, March 24, 2022 3:37 PM

What a beauty!  That is one big model and enjoyed following along with your build.  The finish is absolutely brilliant.  Really nice job.

Thanks,

John

  • Member since
    May 2006
  • From: Chapin, South Carolina
Posted by Shipwreck on Thursday, March 24, 2022 4:10 PM

Great job Johnny! You really had a handle on the Blackbirds black paint scheme. I was behind you in my build; was just about to glue on the nacelles and then to the paint booth when I notice that both wings were warped. Back to the drawing board for me!

On the Bench:

Revell 1/96 USS Constitution - rigging

Revell 1/48 B-1B Lancer Prep and research

Trumpeter 1/350 USS Hornet CV-8 Prep and research

 

 

 

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Thursday, March 24, 2022 6:12 PM

Shipwreck

Great job Johnny! You really had a handle on the Blackbirds black paint scheme. I was behind you in my build; was just about to glue on the nacelles and then to the paint booth when I notice that both wings were warped. Back to the drawing board for me!

 

Are you refering to that funny little dip towards the rear outside ot the wing? My  model does the same thing.  I think that that is supposed to be there and that the wing is not warped. I'll take a look at some photos of the actual plane tomorrow.

Your comments and questions are always welcome.

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Thursday, March 24, 2022 6:59 PM

JohnnyK

 

 
Shipwreck

Great job Johnny! You really had a handle on the Blackbirds black paint scheme. I was behind you in my build; was just about to glue on the nacelles and then to the paint booth when I notice that both wings were warped. Back to the drawing board for me!

 

 

 

Are you refering to that funny little dip towards the rear outside ot the wing? My  model does the same thing.  I think that that is supposed to be there and that the wing is not warped. I'll take a look at some photos of the actual plane tomorrow.

 

 

The wings are not warped where the arrow is pointing. They were designed with that dip. Look at the cover photo on the instruction manual. The dip is very noticable.

Your comments and questions are always welcome.

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Thursday, March 24, 2022 11:04 PM

Pure sweetness, JohnnyK, pure sweetness.

“Ya ya ya, unicorn papoi!”

  • Member since
    June 2014
Posted by BrandonK on Friday, March 25, 2022 12:04 PM

Ah yes, very nice. Very nice indeed. YesYes

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Friday, March 25, 2022 12:51 PM

Thanks for the kind words everyone!

Your comments and questions are always welcome.

  • Member since
    May 2006
  • From: Chapin, South Carolina
Posted by Shipwreck on Friday, March 25, 2022 2:55 PM

JohnnyK

 

 

Shipwreck

Great job Johnny! You really had a handle on the Blackbirds black paint scheme. I was behind you in my build; was just about to glue on the nacelles and then to the paint booth when I notice that both wings were warped. Back to the drawing board for me!

 

Are you refering to that funny little dip towards the rear outside ot the wing? My  model does the same thing.  I think that that is supposed to be there and that the wing is not warped. I'll take a look at some photos of the actual plane tomorrow.

 

 

 

Thanks for your thoughts Johnny. The rear conners of the wing are the controll panel hinges; they may dip one way or another depending on their position when the plan comes to a stop, but they seem to come to fixed flat position with the wing most of the time. Besides the control panel, it woluld no surprise me if there were some curvature to the real or the kit wing.

 

However. I wish that was my problem, because if it were I would not have a problem. The edges of both wings were both squiggly. It looked like too much glue flowed onto the edges of the plastic. It took me 5 hours yesterday of compression, heating with a hair dryer, and dunking in cold water to get them straight. At one point I got careless and overheated to adjacent panels. That is todays fix!

I was very close to ordering another kit! Now I can set back and enjoy your build.

On the Bench:

Revell 1/96 USS Constitution - rigging

Revell 1/48 B-1B Lancer Prep and research

Trumpeter 1/350 USS Hornet CV-8 Prep and research

 

 

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Friday, March 25, 2022 5:22 PM

Excellent!  The finish is very convincing.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Friday, March 25, 2022 9:21 PM

Outstanding work. Well done.

Jim Captain

Stay Safe.

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

  • Member since
    May 2006
  • From: Chapin, South Carolina
Posted by Shipwreck on Saturday, March 26, 2022 1:27 PM

JohnnyK

 

 

 

The wings are not warped where the arrow is pointing. They were designed with that dip. Look at the cover photo on the instruction manual. The dip is very noticeable.

 

That dip is part of the kit and seems to appear in the real thing; even after the straightening which I did, that dip was retained, but reduced, in my kit! I am till working on the collateral plastic damage. Thanks for pointing that dip out.

On the Bench:

Revell 1/96 USS Constitution - rigging

Revell 1/48 B-1B Lancer Prep and research

Trumpeter 1/350 USS Hornet CV-8 Prep and research

 

 

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.