SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

P-51D details

2374 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2003
  • From: Utah - USA
P-51D details
Posted by wipw on Friday, April 11, 2003 12:00 PM
Okay, here's a very simple question.

I've got a Tamiya 1/72 scale P-51D and a Czech Master interior set. Both sets of instructions say to paint the floor brown. What shade of brown is close to what the P-51 was, or was it really metal and therefore should be interior green (or whatever). The CMK set has rectangles molded onto the floor beneith the rudder pedals. Were these metal "wear" plates? And what color should they be??

Thanks for your attention and help

Bill
wipw@yahoo.com
Bill ========================================================== DML M4A2 Red Army ========================================================== ========================================================== -- There is a fine line between "hobby" and "mental illness". (Author unknown)
  • Member since
    December 2002
  • From: Third rock from the sun.
Posted by Woody on Friday, April 11, 2003 12:08 PM
If I'm not mistaken the floor should be natural wood.

" I wish to have no connection with any ship that does not sail fast; for I intend to go in harm's way." --John Paul Jones
  • Member since
    November 2005
Posted by Anonymous on Friday, April 11, 2003 2:28 PM
Yup - the Mustang had a wood floor in the cockpit
  • Member since
    November 2005
Posted by Anonymous on Saturday, April 12, 2003 12:56 AM
Yep, natural wood. But remember it became dirty, grimey and messy very quickly so did not remain plain 'brown'. Use brown/grey mix as a base and then add weathering and a worn look. Only a litle can really be seen unless micro inspecting anyway.
  • Member since
    November 2005
Posted by Anonymous on Saturday, April 12, 2003 1:48 PM
P-51D's had wooden floors, sometimes painted the same color as the interior. Here's a shot of the War-Eagles Museum's Stang:


  • Member since
    February 2003
  • From: Niagara Falls NY
Posted by Butz on Saturday, April 12, 2003 4:49 PM
Wipw,
Best I can say is check w/ your ref material. The flooring was left natural wood but like WBK said, sometimes they were painted the interior color.
After a period of time, you could not tell what color the floor was anyways b/c they got dirty,scuffed,liquids and the like(plain ol usage).
Flaps up,Mike

  If you would listen to everybody about the inaccuracies, most of the kits on your shelf would not have been built Too Close For Guns, Switching To Finger

  • Member since
    November 2005
Posted by Anonymous on Friday, April 18, 2003 1:54 AM
In 1/72 you won't see that much of it when it's built anyway! Those rectangles probably are 'wear plates', so shiny in the middle and dull metallic on the edges may be best. As for the wood effect, Try painting a khaki on it, then dry brush with 'desert yellow' for the grained effect. A dull varnish will add depth. Good luck.
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.