Sword brand kits

Woody

Member since
December 2002
From: Third rock from the sun.

Sword brand kits

Posted by Woody on Sunday, May 4, 2003 10:51 PM

I just bought my first Sword 1/72 AC kit. What a pleasant surprise! The kit, a Vultee P-66 Vanguard, had very finely engraved panel lines and the parts were flash free. I was also impressed by the nice photoetchings, jewel like resin cockpit, and two vacuformed canopies. To top it off the crisp and well registered decal sheet had markings for three nationalities! I have walked past these kits and discounted them as MPM like, but I will now buy them without reservation. Anyone else know of a small company that turns out a high quality kit like Sword? P.S. I almost forgot about the film negative for the photoetched instrument panel. Nice kit. Cool [8D]

" I wish to have no connection with any ship that does not sail fast; for I intend to go in harm's way." --John Paul Jones

Reply

leemitcheltree

Member since
January 2003
From: Washington State

Posted by leemitcheltree on Monday, May 5, 2003 6:34 AM

Sword kits? I've got a Northrop N-9MA and I must agree - the quality of the moldings isn't bad for a limited production kit, nice panel lines, nice vacuum formed canopy, but all those wings (top & bottom, port, cantre and starboard) and every one as warped as can be.
It's gonna take a fair amount of boiling water to take care of this one..................but I'll do it - othyerwise I like the kit. Big Smile [:D]

Tree

Cheers, LeeTree
Remember, Safety Fast!!!

Reply

Anonymous

Member since
November 2005

Posted by Anonymous on Monday, May 5, 2003 1:42 PM

Yes, Sword makes some very good kits...wish they would do more. I too have the P-66 Vangard, but I don't think it is nearly as well done as their Curtiss Seamew. The Vangards landing gear is a disapointment...like two poles rather than anything resembling a gear strut. Be careful not to slam MPM unless you have seen some of their newer kits. They have come a long way over the past couple of years and their quality is very good now. Their Blenheim kits, for instance, are superb! Let's hope all of these limited run companies keep offering kits we thought we would never see!

Joe

Reply
Edit

Woody

Member since
December 2002
From: Third rock from the sun.

Posted by Woody on Monday, May 5, 2003 5:33 PM

I wasn't trying to slam MPM. I have most of their kits that interest me, bought the Fw-190 V1 the same time I bought the Vanguard. I do think the Sword kit is just a bit better, especially the injected parts - less flash and crisper detail. I mainly made the post because I wished I'd known how nice these kits are. Anyone else know of a small company that puts out quality kits?

" I wish to have no connection with any ship that does not sail fast; for I intend to go in harm's way." --John Paul Jones

Reply

Keyworth

Member since
January 2003
From: NE Georgia

Posted by Keyworth on Monday, May 5, 2003 6:24 PM

I have the Sword Vanguard kit in addition to several of their other 1/72 offerings. I'm impressed with the overall quality of all the kits. They're all a vast improvement over the older kits I started with in the 60-70's.

"There's no problem that can't be solved with a suitable application of high explosives"

Reply

Woody

Member since
December 2002
From: Third rock from the sun.

Posted by Woody on Monday, May 5, 2003 9:19 PM

Well Keyworth and ninedriver what markings are you going to build your Vanguards in? I can't decide between the British or American machines. I do have a book with a good picture of the British plane so I'm leaning that way. Big Smile [:D]

" I wish to have no connection with any ship that does not sail fast; for I intend to go in harm's way." --John Paul Jones

Reply

Anonymous

Member since
November 2005

Posted by Anonymous on Tuesday, May 6, 2003 10:37 AM

I suspect I'll do mine in Chinese colors...I think that was the only country to use them in combat and I have no aircraft in Chinese markings currently...hate to leave them out. I agree, by the way, that Sword's molds are very crisp and don't need the clean up that some others require.

Joe

Reply
Edit

THE MAGAZINE

CONTACT US

RECENT ARTICLES

POPULAR TOPICS

RECENT REVIEWS

POPULAR TOPICS

RECENT REVIEWS

POPULAR TOPICS

RECENT VIDEOS

POPULAR TOPICS

RECENT THREADS

CATEGORIES

NEW PRODUCTS

OUR STORE

CURRENT ISSUE

SEARCH FINESCALE.COM