Posted by toadwbg
on Tuesday, September 23, 2003 8:05 PM
I personally like to use Testor's Model Master Flat White Enamel through my Pashe H at about 20 psi. I spray on the first coat on the medium-heavy side. Than sand it down with a used nylon scouring pad. Than I spray a final coat of very fine diluted, thinned MM white. I will spot sand where enecessary with 1500 grit wet. Finnaly I put on a couple of coats of future.
I've found the Krylon White to be too thick and it tends to yellow. I also steer clear of airbrushing acrlics in white as they usually are not opaque enough.
"I love modeling- it keeps me in the cool, dark, and damp basement where I belong"
Current Projects:
1/48th Hasegawa F-14D- 25%
1/48th Tamiya Spitfire- 25%
|