Revell/Monogram A-10 Thunderbolt II

Hi, Steve.
I built that kit a zillion years ago (when it was just Monogram), and if I recall correctly, you just glue 'em in the closed position, no? I don't recall doing anything particularly difficult with them.
Maybe the kit is different now, but the one I built was simple enough.

They are molded in the open position as a seperate piece with no option to have them closed unless you want to do it yourself.

Steve

Hmmmm....
Well Steve, it's either a different kit, or I just didn't know any better at the time and just glued 'em shut however they fit!

That old kit's in storage back in the States, so I can't check it out...
Anybody else out there who can help Steve out?

I may have easy access to the kit (I also have the Monogram release... depends where I have hidden it!!). If I lay my eyes upon it I will have a look.

When I built the 'Hog" with them closed, here is how I did it. Seperate the speed brakes from the spar. You can't use the spar as it will not work in closing up the speed brakes. Use card stock to close up the hole where the spar would go. Glue the speed brakes together and dry fit into the slots, triming the stock till you get a close fit. Then glue onto the wing. You will also have to make new hinge tabs for the speed brakes as you will damage the ones molded on when you cut off the brakes. Sounds complicated, but it is real easy to do.