SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Resurrected WIP.... M60A1 w/M9 Dozer....Call'n it DONE

38331 views
67 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Monday, June 15, 2009 4:12 AM

Hello,

for OD I matched a paint using an old ammo can, and what I use since then is Humbrol 66 with a coat of future on top of that. The result looks like that:

M151

By the way, it's unbelievable how different the color looks before the future coat, it's very close to gray.

I also heard stories about the soldiers washing their vehicles with diesel fuel (this is actually forbidden by the TM's). After that the color gets rich and shiny, but fades quite fast after several repetitions. That could be an excuse for a not-very-exact matchwhen it happens Cool [8D]

Have a nice day

Pawel

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    December 2007
  • From: NE Massachusetts
Posted by 1SG Davis on Sunday, June 14, 2009 10:16 PM

Mike, Steve, Billy/1SG, Stikpusher,

Great information guys,  especially with my paint question.  I made a trip back to my LHS this afternoon to get some of the above mentioned paint and a set of the AFV chevron tracks (I figured I'd go old school) I plan on doing a few test mixes with all the suggestions to see what looks best. 

BTW, I do remember 25 years ago or so using that Pactra Dark Olive Drab.  I'm sure if I dusted off some old boxes in the back of my closet I find a dried up bottle or two.  Too bad Pactra paints seem to have disappeared.

Thanks again for the advice, I'll be sure & post my progress.

Gary/1SG

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Saturday, June 13, 2009 11:12 AM
I ike using MM Green Drab w/some Black added for the 60s/70s dark OD. The old Pactra Dark Olive Drab was a great match for that color.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    April 2003
  • From: Central Wisconsin
Posted by Spamicus on Friday, June 12, 2009 9:03 PM
Model Master acryl line has two viable start points for the dark OD. One is called US Army Helo Drab and the other is called Green Drab. You may need to mix some black in to get exactly what you're looking for. The solid rubber chevron track would be more appropriate for an early M60A1, but both would be acceptable if the vehicle being modelled is an old girl still hanging around. AFV club makes decent sets of both tracks as AM parts. I think the M9 blade is okay on an early, but if my memory serves me the old ones had an armored oil tank on the port side replacing the rear sponson box. There were also hydraullic lines (big armored ones) running from the rear of the tank along the bottom of the hull. I haven't been able to find any photos of these features online and didn't take any when I was in the service. Then again my memory may be fooling me, it was a long time agoTongue [:P]. M60A1's have been heavily photographed over the years and there are many on the web. Try a google or ask search, something will most likely turn up.

Steve

ASA
  • Member since
    November 2005
  • From: Texas
Posted by ASA on Friday, June 12, 2009 8:50 PM

In the 1971 to 1973 timeframe I worked at a Army NG Consite with numerous M60 and M48 tanks.  These tanks were painted in OD (sorry, dont know the shade) with white stars and USA numbers.  Sometime during that period we started to replace directional tracks (chevron) with the new non-directional (block).  I beleive either tracks will work for the paint scheme you desire.

Billy/1SG

  • Member since
    July 2006
  • From: New Jersey
Posted by redleg12 on Friday, June 12, 2009 8:48 PM

Top - For that VN and post VN all green I use XF 13 JA Green, it is closed to what was used then. You can also lighten up the XF62 OD wit about 15 - 20% XF 60 Dark Yellow though that will be closer to early OD.

Rounds Complete!!

"The Moral High Ground....A Great Place to Emplace Artillery."

  • Member since
    December 2007
  • From: NE Massachusetts
Resurrected WIP.... M60A1 w/M9 Dozer....Call'n it DONE
Posted by 1SG Davis on Friday, June 12, 2009 7:41 PM

Just scored an Italeri M60A1 in my LHS 50% off sectionSmile.  I'd like to build this up as an early M60A1 with a solid OD paint scheme.  I've got a few questions that I need some help with.

#1 the O/D paint from Tamiya (XF-62) and Model Master (34087) both seem to be a little too "green" when compared to some color pictures of early O/D M-60A1's I've found, the picture's seem to show a darker more brownish O/D.  Is there a different color that matches better?

#2 Could the later T142 octagonal be found on a O/D M60A1 or would I need to use the earlier "chevron" style track?

#3 Would Academy's M9 Dozer Blade set be appropriate to add to an early O/D M60A1?

#4 Does anyone know of some good pictures?  I've found just a few  (Toadmans & Prime Portal pictures seem to be mostly MERDC & Europe 1)

Hope to be able to post some WIP pictures soon.

Thanks,

Gary / 1SG

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.