SOVIET M1931/37 122MM CANNON

terry35

Member since
May 2005
From: Dublin Rep Of Ireland

Posted by terry35 on Sunday, February 17, 2013 5:47 PM

Great looking gun.

Terry

Reply

wbill76

Member since
July 2004
From: Texas

Posted by wbill76 on Sunday, February 17, 2013 5:23 PM

Nice work on this one Wayne, got to love a 'big gun'! Wink

BP Models

Reply

waynec

Member since
April 2006
From: Denver, Colorado

Posted by waynec on Sunday, February 17, 2013 5:14 PM

<p>thanks.</p>well that's what i thought as that is how it is on the german 150. but, in addition to the 2 pivots, it has an attachment in the center as well that doesn't appear to be a pivot but could be a lock. there would have to be movement allowed. the color diagram in the instructions show it sticking out too. with the paint it may be difficult to move. guess i could lay down some ground cover and have it sitting on a stump.

Никто не Забыт (No one is Forgotten)
Ничто не Забыто (Nothing is Forgotten)

Reply

Bronto

Member since
November 2004
From: Cat Central, NC

Posted by Bronto on Sunday, February 17, 2013 4:38 PM

Nice looking cannon. One small thing you might be able to fix - when not hooked to a vehicle, the front draw bar / towing hook would be lowered to the ground. It is mounted on a pivot, and there is no lock for it to remain straight out towards the front like it is.

Reply

waynec

Member since
April 2006
From: Denver, Colorado

Posted by waynec on Sunday, February 17, 2013 2:41 PM

a basewood strip and i added four feet. stained in chestnut brown which i got at Guirey's paint store in the discount area. $2 for a quart. may put some ground material on it. it's held on with blue tack. just something for easier handling.

Никто не Забыт (No one is Forgotten)
Ничто не Забыто (Nothing is Forgotten)

Reply

Jester75

Member since
December 2006
From: N. Georgia

Posted by Jester75 on Sunday, February 17, 2013 1:15 PM

Thats a big gun!! Nice build. Is that some kind of base that its going to be displayed on ?

Eric

Reply

waynec

Member since
April 2006
From: Denver, Colorado

SOVIET M1931/37 122MM CANNON

Posted by waynec on Sunday, February 17, 2013 1:12 PM

this is the trumpeter kit. the instructions are better than the sFH-18 as they clearly define travel vs fireing mode difference. i assumed the stakes on the top and right side were aiming posts and painted them accordingly. adds some color. sliding the barrel assembly onto the carraige after painting is always tight and needs touchuo. biggest headache was the 4 brackets holding the gun shield. they fold into an L before shaping. bottom 2 were fine, just an angle fold. top 2 have an angle fold going into a complex curve. trashed them so i replaced them with styrene strips and no L. seems the 152mm gun has the same setup and the ipms review noted the same issue. added some dirt on the trails and spades, washed with MMA black wash and dusted with powders.