I have this kit in my stash. Here's a tut to assemble the trck but the pictures are gone

http://cs.finescale.com/fsm/modeling_subjects/f/3/p/157928/1708980.aspx#1708980

And I use Testors Liquid Cement (much like Tamiya extra thin). You just have to let the glue set for at least 5 minutes and they will go on without much trouble. If you wait for about ten minutes after letting the glue set for a while they are easier to manage, if only a little stiff. Gravity will take over after that. With a little gentle prodding to get them how you want them.

These tracks are really easy to work with. Not sure why most guys find them so difficult lol. Must be an oddity of my own making. [shrug] lol

Edit; Crap. I thought we were talking about the plastic ones in the kit.  :/  Disregard.

I use a plastic weld and just apply it with a fine old paint brush, just along the edges of the track pads front and back.

What type of glue are you using and how are you applying it? Seems like I would either need A. Extra thick super glue or B. something like a touch-and flow applicator, neither of which I currently have.... I dont think these type of tracks would be even remotely as much of a PITA as these are, on a larger subject, like a tank.

  Thanks!  Rudy

I have another 10 sets of those damn Fruil tracks to use up, damn things. I built my Dragon 251 tracks last night in less than 2 hours, far much easier.

She's looking good Rudy! 

Or at least until I came to those track links- oh my head! You have better eyes and hand-eye coordination than I! 

Boy, you guys were right, these Fruilmodel tracks for this particular subject are no cake walk either. They are so small, I did not have a pin-vise drill bit small enough, so I had to just poek the tip of a pick through the hole to make sure it was clear. This seemed to work O.K. I started to assemble a few short runs, but the "caps" (the rubber pads) for the tracks fit pretty poorly over the "pins" made of wire, but we are dealing with castings here, VERY SMALL castings.... I got all of the track pieces finished last night, as far as cutting the wire for the "pins" and gluing them into place.... Thanks for following!

Rudy

Nice Rudy, keep em coming.

Terry

It's looking great Rudy. I don't know if this will help you....but take painters tape and assemble the tracks on the sticky side up and once you have the tracks complete run your glue down the center of the tracks. Once the glue dries lightly lift the tracks off the tape. Picked up this from Karl's (the dogg) tank build and detailing article in FSM. Good luck and it is looking sharp.

She is coming along nice. But i would not have high hopes for those Fruils. I love their tracks but found the 251 set a real night mare, personally, i found the Dragon tracks much easier to use.

These pics are over a week old, I have since done some detail painting of the shift knobs, the tank on the dash, and the ammunition magazines and ammo contained therin. I also fixed the shifter I broke off again (not seen in these pics), and Gave up on thos godforsaken individual tracks. They are so damn small, (not like a larger tank) and It is nearly impossible to keep the glue from running where it should not be. I bought some fruilmodel tracks, and have spent most of my modeling time Picking out items to make a nice diorama (my first) for my Uncle, in Memory of his father who just passed, a Korean-war Veteran of the First Cavalry, in field artillery. I think my uncle will be elated and love it when its done. I picked up a Bronco 155mm howitzer, and some verlinden Field artillery figures..... I will get back after this halftrack tonight or tomorrow night with some further painting (holding up assembly) and the install of the new fruilmodel tracks when they show up. They will be my first set......

Thanks for looking!

Rudy

Going well Rudy..

Terry

Rudy - 

Great choice on the 1/2 track, and it is looking great. I hope to add one of those to my "build list". I will be watching to the end and enjoy the build.

PaK are the Anti tank guns, such as the PaK 40. The artillery guns don't really have a designation in the same way as At and AA guns do.

Well yes and no.  All guns had their manner of concise nomenclature.

Your AT guns could be (very incomplete lists below: only sampling):

3.7cm PAK 35/36

5cm PAK 38

7.5cm PAK 40

7.5cm PAK 97/38

7.5cm PAK 41

8.8cm PAK 43

8.8cm PAK 41/43

etc.

AA guns:

2cm FlaK 30

2cm FlaK 38

3.7cm FlaK 37

3.7cm Flak 43

8.8cm Flak 18

8.8cm Flak 37

8.8cm Flak 41

etc.

Field Artillery

7.5cm FeldKanone (FK) 38

10cm Kanone 17

10cm Kanone 18

10.5cm leFH16 (leichte feld haubitze or light field howitzer)

10.5cm leFH18

10.5cm leFH18/40

15cm sFH18 (schwere feld haubtze or heavy field howitzer)

etc.

Same with all sorts of other artillery, tank guns, rocket artillery, etc.

Everything was laid out very plainly.  In usage, a "Pak 40" is assumed to be the widely used 7.5cm.  But look at "Flak 37" -- you'd have to say either 3.7cm Flak 37 or 8.8cm Flak 37.  The caliber weapon officially preceded the model number.

 A very good encyclopedia is Ian Hogg's German Artillery of World War Two

(many of which can be had for less than USD20 on bookfinder.com)

RudyOnWheels

thankd for the clarification BISH! I knew after I posted it that it was wrong, are'nt the "Pak" ones the large artillery cannons? I hope to get some work done on this thing this weekend.  Still looking for some good thread on "winter camo"...

 

  Thanks!

 

  Rudy

 

PaK are the Anti tank guns, such as the PaK 40. The artillery guns don't really have a designation in the same way as At and AA guns do.

thankd for the clarification BISH! I knew after I posted it that it was wrong, are'nt the "Pak" ones the large artillery cannons? I hope to get some work done on this thing this weekend.  Still looking for some good thread on "winter camo"...

  Thanks!

  Rudy

Very nice, certainly a lot more detailed that the oneI built from the very old Tamiya kit... Hannomag.

I cant wait to see it painted.

Some nice prgoress Ruby, seem to have got a grip of the gun. I tend to paint and weather the inside of my 251's, then put the two halfs together and do the oputside separately.

And just for your info, the gun is a Flak 37.

Thanks for following guys! Let me say, this "pak 37 or Pak 38" cannon is the most INFURIATING thing I have ever put together... THe instructions are terrible, dont show what order the parts go on, etc. I finally got tired of fighting with a couple of arms that were not allowing me to continue putting on other parts; and I replaced them with solder. I dont think anyone else will notice when Its painted. I also layed down a "base" coat of Model Master "Panzer Dunkelgelb 1943" tonight because of how this thing is built and shaped, there were too many places I'd never be able to paint when its assembled. I am interested in seeing a couple good thread on doing winter camo! Pics go from oldest at the top to latest at the bottom. Thanks for looking!  Rudy

RudyOnWheels: I love your "can-do" attitude!, nice start.   I'm looking forward to your winter camo' work.  Be sure to paint the vehicle it's typical dunkelgelb (dark yellow) first THEN add the winter wash.

If you have any questions let us know, there are several experienced winter camo' modelers here on the forum...myself included.

Nice work so far,those indies must be fun. 

Hope you will post some pics of that build Colonel.

The Dogg build a great one before and posted it on here which I was saving biut when they changed the site here we lost it.

Right now I'm building the251/7 which is basely the same parts. The tracks were giving me fits until I realized they go on one way only. Look at the bottom of the pads. You will see 3 "knobs", one large one in the middle and two smaller ones closer to one side than the other. When you put the large one in the hold of the track make sure the side with the two smaller ones are next to the next track in the link, in your picture that would be on you left. After I realized that the tracks went much faster.

Oooh, I've been wanting to add this version to the stash for a while now. Nice start! 

Love these vehicles so I'll certainly follow along. Rudy nice choice.

Terry 

O, nice, a 251, i never get enough of those. I built this one myself a couple of years ago. I rathe rliked it and i found the tracks a damn sight easier than 251 Fruils. Look forward to seeing more.

And it might actually inspire to finally get the diorama finished for mine.