Thanks Silentbob33.

Thanks WannabeFarmboy.

Thanks Gamera: I did not do a pin wash, just some dry brushing, should have done a pin wash. Yeah should have painted the tarp a brown color. That just hit me on that. When I build Tamiya's US cargo truck again, I'm going to try and make a tarp to go over the bed.

Oh, nice clean build- kudos!!! 

Did you do a pin wash? A little bit around the details and recessed areas can make the detail pop but if you're happy with her I wouldn't worry about it. 

And only other nitpick I'd have is maybe paint the tarp on the cab a different colour like green or brown to make it stand out a little more? 

Anyway I'm just nitpicking- really nice work! 

That looks really good. Great work!

After cleaning up the over spray from the XF-58 with 2099, I assembled the reaming parts before a gloss coat went on. The only decals I used where for the license plate, the decal sheet provided plenty of numbers to use, but only a few letters. The photo's I saw had two letters then a dash, then six numbers. It was very tricky getting them in line, must have taken close to 30 minutes. The pole rods holding up the engine covers where made from left over parts from a Dragon StuG III kit, two crow bars where used. A light to medium amount of XF-57 Buff was airbrushed on in a dusting. After that everything was given a flat coat. One mistake I did was gluing on the bed before removing the tape mask over the rear window.

Only ran into a few problems but I'm very happy with the final result. This project took 61 days to complete. With 394 parts, I recommend this kit for intermediate modelers.  The figures in the last picture are from a Cyberhobby StuG. III Ausf. kit.

117 by Daniel Smith, on Flickr

118 by Daniel Smith, on Flickr

119 by Daniel Smith, on Flickr

120 by Daniel Smith, on Flickr

121 by Daniel Smith, on Flickr

122 by Daniel Smith, on Flickr

123 by Daniel Smith, on Flickr

124 by Daniel Smith, on Flickr

125 by Daniel Smith, on Flickr

126 by Daniel Smith, on Flickr

127 by Daniel Smith, on Flickr

128 by Daniel Smith, on Flickr

129 by Daniel Smith, on Flickr

Thanks Tigerman: Yeah I'm tempted to add more line's to.

Bronto: Though Tigerman was referring to ICM's Typ 2,5-32 (1,5 to) #35401, which Revell's German Truck type 2,5-32 #03250 is a rebox of. It's selling for $28.95 USD, can't beat that.

DantheMan85

 

Been thinking about picking up the Revell of Germany re-box of that kit.

 

The Revell AG kit is the Italeri kit not the ICM kit

Looking good so far. I'd be tempted to add more lines though. 

Thanks Sprueone: Yeah the jigs really help assembling the truck frame and bed.

Thanks Tigerman: Been thinking about picking up the Revell of Germany re-box of that kit. There are a few fit issues but for the most part, just glue and go.

Airbrushing went smoothly, the truck, bed, 2cm Flak 38, fuel drums, benches, jerry cans, head lights, wheel rims were airbrushed Model Master enamel Africa Grunbraun 2099.  The kit comes with masks for the windows, they are stickers not tape masks.  The windshield pealed off after first coat of 2099 went on, I used the sticker to cut a tape mask out of Tamiya tape.

91 by Daniel Smith, on Flickr

92 by Daniel Smith, on Flickr

93 by Daniel Smith, on Flickr

94 by Daniel Smith, on Flickr

95 by Daniel Smith, on Flickr

102 by Daniel Smith, on Flickr

Other colors used were, Tamiya XF-85 Tire Black for the wheel

97 by Daniel Smith, on Flickr

XF-65 Field Grey for the fuel drums, XF-59 Desert Yellow for wooden boxes & ladder. The water jerry cans I first painted XF-2 Flat White then cut thin strips of Tamiya tape and wrapped them around forming a cross, then airbrushed Model Master 2094. The tarp and remaining jerry cans were painted XF-60 Dark Yellow.

96 by Daniel Smith, on Flickr

100 by Daniel Smith, on Flickr

101 by Daniel Smith, on Flickr

104 by Daniel Smith, on Flickr

103 by Daniel Smith, on Flickr

I tried to find a color to post-shade over Africa Grunbraun 2099 but was not able to, so I'm moving on to camouflage. There's about eight pins that connect the bed to the frame, the dried paint allows me to put the bed on the frame and it says on, making it easier to airbrush the camouflage.

105 by Daniel Smith, on Flickr

Using my Badger 200G with a fine head, I free hand on Tamiya XF-58 Olive Green. Using eight to ten PSI and thinning down the paint more than usual, was able to free hand on any shape I wanted. I think it turned out great, not sure if the camouflage was applied to the inside of the bed so I skipped that.

106 by Daniel Smith, on Flickr

107 by Daniel Smith, on Flickr

108 by Daniel Smith, on Flickr

Applied some camouflage to the 2cm Flak 38 and it's base.

109 by Daniel Smith, on Flickr

110 by Daniel Smith, on Flickr

The next day I touched the edges of the XF-58 with Model Master 2099. And the 2cm Flak 38 & the base.

111 by Daniel Smith, on Flickr

112 by Daniel Smith, on Flickr

113 by Daniel Smith, on Flickr

114 by Daniel Smith, on Flickr

115 by Daniel Smith, on Flickr

116 by Daniel Smith, on Flickr

Really nice build going. I have the ICMversion, but this kit looks really sweet. Can't wait to see what your camo pattern looks like. I personally like the squiggly lines myself like in Normandy.

Good clean work. I dig your layout and assembly jigs!

Thanks AlanF, yeah the kit does together great.  Only had a few fit issues.

Nice progress. It looks like a great kit.

Thanks Bronto, I used the Model Master Afrika Grunbraun 1941 because the instructions called out that color.  I do plan to post-shade it, to lighten it up.

Nice clean build so far.  I'm curious why you chose to paint it with "Model Master Afrika Grunbraun 1941 #2099"  as no Opel trucks were factory painted with that color.

Step Eight is final cab assembly, I airbrushed inside the engine area and cab Model Master Afrika Grunbraun 1941 #2099, then brushed painted the engine Model Master Acryl Steel 4679.

41 by Daniel Smith, on Flickr

50 by Daniel Smith, on Flickr

49 by Daniel Smith, on Flickr

Step Nine is assembly of the cab doors and roof. Before I glued them together I airbrushed the seat Model Master Leather 4674, in applied the decals to the dash, and installed the steering wheel.

54 by Daniel Smith, on Flickr

55 by Daniel Smith, on Flickr

31 by Daniel Smith, on Flickr

32 by Daniel Smith, on Flickr

52 by Daniel Smith, on Flickr

53 by Daniel Smith, on Flickr

56 by Daniel Smith, on Flickr

Step Ten & Eleven is cargo bed assembly. There are to different beds, one for the cargo bed, and the other for 2cm flak 38. I built the one for the cargo bed with the open slots at the top.

27 by Daniel Smith, on Flickr

33 by Daniel Smith, on Flickr

34 by Daniel Smith, on Flickr

Step Twelve has you attaching the bed to the frame, I decided to leave it off for easier airbrushing. Plus the rear window would be hard to mask. Looks like I don't have any photos of the bed by it's self.

Step Twelve through Eighteen is the 2cm Flak 38 gun assembly. There are a lot of small parts, all I can say is take your time. It builds up to a nicely detailed model of the Flak 38. I left off part number A40, so I could move the barrel up and down. The base will turn 360 degrees.

35 by Daniel Smith, on Flickr

36 by Daniel Smith, on Flickr

43 by Daniel Smith, on Flickr

45 by Daniel Smith, on Flickr

46 by Daniel Smith, on Flickr

47 by Daniel Smith, on Flickr

48 by Daniel Smith, on Flickr

The last step Nineteen is final parts and the rolling floor with front wheels for the Flak 38.

87 by Daniel Smith, on Flickr

83 by Daniel Smith, on Flickr

84 by Daniel Smith, on Flickr

85 by Daniel Smith, on Flickr

86 by Daniel Smith, on Flickr

88 by Daniel Smith, on Flickr

Here's what the final assembled model looks like.  The bed we dry fitted on, tires held on with double sided tape for the photos.

Cab and frame

57 by Daniel Smith, on Flickr

59 by Daniel Smith, on Flickr

60 by Daniel Smith, on Flickr

61 by Daniel Smith, on Flickr

With bed

62 by Daniel Smith, on Flickr

63 by Daniel Smith, on Flickr

64 by Daniel Smith, on Flickr

66 by Daniel Smith, on Flickr

67 by Daniel Smith, on Flickr

68 by Daniel Smith, on Flickr

69 by Daniel Smith, on Flickr

70 by Daniel Smith, on Flickr

71 by Daniel Smith, on Flickr

72 by Daniel Smith, on Flickr

73 by Daniel Smith, on Flickr

With 38 Flak

80 by Daniel Smith, on Flickr

81 by Daniel Smith, on Flickr

82 by Daniel Smith, on Flickr

With cargo

89 by Daniel Smith, on Flickr

There are eight decals options, I choose to go with a overall color of Model Master Afrika Grunbraun 1941 #2099, with Olive Green camouflage using Tamiya XF-58 Olive Green.

90 by Daniel Smith, on Flickr

Next up will be airbrushing, about nine different colors in all.