SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Quick pic of watercolor wash on roadwheel.

813 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Quick pic of watercolor wash on roadwheel.
Posted by Anonymous on Saturday, June 26, 2004 12:33 PM
I had mentioned watercolor wash in a few previous posts but didn't have a pic to illustrate. For anyone interested, this is a before and after Tiger roadwheel from the back, the wash was to simulate oil from the bearing. There will be plenty of additional applications of mud and junk, I just wanted to show the wash on it's own.



The basecoat was covered with Future. The wash formula is, by weight:
1 gm Van Dyck Brown
1 gm Ivory Black
20 gm tap water
1 drop of dish detergent.

  • Member since
    November 2005
Posted by Anonymous on Saturday, June 26, 2004 12:59 PM
hey looks nice...thansk for the tip.....now off to Zim.
  • Member since
    September 2003
Posted by maffen on Saturday, June 26, 2004 1:02 PM
yep ausf thats comming along nicely, thanks for let us take a look Tongue [:P]
  • Member since
    September 2011
Posted by fightnjoe on Saturday, June 26, 2004 2:15 PM
thanks for the look ausf. something for me to shoot for.

joe

Veterans,

Thank You For Your Sacrifices,

Never To Be Forgotten

Where you can find me:

Workbench on FaceBook  Google Plus  YouTube

  • Member since
    April 2003
  • From: Sunny Florida
Posted by renarts on Saturday, June 26, 2004 3:05 PM
Ausf,
Did you clearcoat the wheel before applying the wash or is it applied on flat paint? I like the mottled effect your getting on the surface of the wheel.

I've found that by clearcoating prior to the wash, it will adhere to the edges of details better and won't creep or "bloom" out across the surface of flat paint. It also runs down the edges or panel lines faster and makes for some nice outlining.
Mike "Imagination is the dye that colors our lives" Marcus Aurellius A good friend will come and bail you out of jail...but, a true friend will be sitting next to you saying, "Damn...that was fun!"
  • Member since
    November 2005
Posted by Anonymous on Saturday, June 26, 2004 3:18 PM
It's clearcoated with a very light spray of future. The bloom in this case is intentional for the oil smear, most of the wheels don't have it. I just like that effect, looks like an old leaking bearing after some rain and time.
  • Member since
    November 2005
Posted by Anonymous on Saturday, June 26, 2004 8:11 PM
Looks like a nice touch Ausf......I take it these are not centrally located on the kit or the nice effect wouldn't be seen. I might have to give watercolour washes a go.

Do you have any problems with the finish when you are handling the road wheels, for sanding off the moulding marks, etc?
  • Member since
    November 2005
Posted by Anonymous on Saturday, June 26, 2004 10:27 PM
QUOTE: Originally posted by petbat

Do you have any problems with the finish when you are handling the road wheels, for sanding off the moulding marks, etc?


As a matter of fact I just finished that. I cleaned off the sprue marks, mounted the rubber tires and glued the assemblies together. My fingers had some color on them afterwards but not much considering I was handling them for three hours in a warm attic workshop after only about eight hours drying time for the wash. The beauty of the watercolors is you can change at will until sealed. You can just wipe 'em clean with a damp papertowel if you don't like the result. I really expected more to rub off while putting them together, I have to say, I'm pleasantly surprised.

I wanted to wait for the assemblies to be complete before spinning on some mud and straw. That's next.....
  • Member since
    March 2003
  • From: Rain USA, Vancouver WA
Posted by tigerman on Saturday, June 26, 2004 10:33 PM
Great looking. Something I'll have to try.

   http://i7.photobucket.com/albums/y269/wing_nut_5o/PANZERJAGERGB.jpg

 Eric 

  • Member since
    November 2005
Posted by Anonymous on Saturday, June 26, 2004 11:01 PM
Very effective, Ausf, good stuff.
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.