SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

1/72 tow cables...

817 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Posted by Anonymous on Tuesday, August 10, 2004 8:01 AM
I just grabbed a kit from Home Depot. It had a flex shaft (important in my opinion) plus a whole array of bits and accessories for about $75.
I would just l concentrate on variable speed and a flex. That's the most important. I realize it's probably not the best practice: the flex shaft slows down if curved too much and I find this pretty handy in some circumstances.
  • Member since
    December 2003
  • From: Montreal
Posted by buff on Tuesday, August 10, 2004 7:01 AM
Ausf, what model Dremel do you use? I'm thinking about getting one, but I'm not really sure what to look for.

On the bench: 1/32 Spit IXc

  • Member since
    November 2005
Posted by Anonymous on Monday, August 9, 2004 5:01 PM
I just put three strands of really thin wire in the chuck, wrapped the other end around a stationary object (my airbrush holder), pulled it taught and gave it a go at the lowest possible speed for about 2 seconds. That's it. Viola!
Can't take the credit for this one, it's from Angus Creighton in his Tamiya Steel Wheeled Tiger book. He uses it for the track mounting cable. Works great for anything I think.

Scubaboy, I haven't attached it yet, I'll probably use Bindex but CA should work fine.
  • Member since
    November 2005
Posted by Anonymous on Monday, August 9, 2004 11:05 AM
QUOTE: Originally posted by ausf
, the replacement cable took less than 2 seconds in my dremel. Three strands of thin wire spun together.


Great idea! How do you do it with a dremel, exactly?
  • Member since
    November 2005
Posted by Anonymous on Sunday, August 8, 2004 11:31 PM
Wow, that's a great tip, thanks. Did you just attach the cable ends to the cable with CA glue?
  • Member since
    November 2005
Posted by Anonymous on Saturday, August 7, 2004 2:48 PM
I think there's going to ba alot of sprue stretching...wait and see what I have planned.
Anyone ever build a Maybach out of sprues?
  • Member since
    November 2005
Posted by Anonymous on Saturday, August 7, 2004 2:38 PM
I can use them for MTD you say !!! D**n, my kit doesn't have any tow cables, I didn't know until I got the kit, but I will try to make some from streched sprue.
  • Member since
    December 2002
  • From: United Kingdom / Belgium
Posted by djmodels1999 on Saturday, August 7, 2004 2:21 PM
Superb, Ausf. That's how I do mine too!
  • Member since
    November 2005
1/72 tow cables...
Posted by Anonymous on Saturday, August 7, 2004 2:09 PM
And no, you can't use 'em for MTD, only what's in the box, right?

This is the tow cable for the Italeri T-34. The kit part and my rendition with a familiar object for size perspective. The kit part is hideous in my opinion, the replacement cable took less than 2 seconds in my dremel. Three strands of thin wire spun together.



I know it seems thin, I figure smearing some paint on it will thicken it a little. If not I'll use four strands and redo. I think the Russian cable ends were larger than the German ones. I'll see what Revell has to offer when I crack the box tommorrow.
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.