SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

chrome removal

908 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2008
Posted by tankerbuilder on Saturday, February 14, 2009 1:52 PM
hi  i was recently told by the folks at CHROMETECH to use INDUSTRIAL PURPLE as it also takes off the primer lacquer they use . it will not hurt the plastic and it,s available at HOME DEPOT  . hope this helps  TANKERBUILDER
  • Member since
    March 2005
  • From: Leduc, AB Canada
Posted by gormoneeye on Sunday, January 25, 2009 4:49 PM
Easy off oven cleaner. I was dealing with the same problem, trying to remove the chrome from the wheels on my GT cars. It works within seconds, but must be handled carefully. I put enough of the oven cleaner in a plastic container to completely submerge the wheels. The chrome literally disappears. Remove them after a couple of minutes and rinse them thoroughly in water. Hand and eye protection should be worn as well as good ventilation, this is caustic stuff.

It's not what you think you do that counts, it's what you do that counts when you think . . . I think?

hud
  • Member since
    November 2005
  • From: Jamestown,NC
Posted by hud on Sunday, January 25, 2009 10:19 AM

Windex w/ammonia-d works well also. Been using it for years. Won't hurt plastic parts and usually takes way less than an hour to remove the chrome. HTH.

Steve

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Saturday, January 24, 2009 11:48 PM

All the above are great methods. I have used ordinary Bleach from my wife's laundry supplies. A mayonaise size jar has lasted me years. Just drop the parts in the jar and let them soak. Some take about an hour to remove all the chrome with no effect on the plastic. Some have to be left overnight. Seems to me that the better the kit, the longer it takes. When the chrome is gone, wash the parts with a toothbrush and some soapy water. Good Luck.

JimCaptain [4:-)]

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

  • Member since
    June 2006
Posted by KennyB on Saturday, January 24, 2009 10:22 PM

I strip a lot of chrome and I've used 2 different things very successfully. Vinegar, just put regular white vinegar from the kitchen cupboard in a jar, put your parts in and wait. Sometimes it might take overnight, but I have seen it come off in an hour. The other thing is Westley's Bleche-White (that's how it's spelt). You can get this in almost any auto parts store in the detail department. It's whitewall tire cleaner. Use it the same way as the vinegar, this stuff works really good. I've read that you can use it to strip paint off a model, but never tried it for myself. Just remember, no matter what you use to strip the chrome, a good rinse with water will be needed afterwards.

                                                                                   Ken

  • Member since
    July 2007
  • From: Byron, GA.
Posted by Camojoe2 on Saturday, January 24, 2009 10:08 PM

 Purple Lake, a.k.a. Castrol Super Clean. Doesn't damage the plastic either. Found at Wally World and automotive stores.

  Camo

  • Member since
    January 2009
chrome removal
Posted by stevo59 on Saturday, January 24, 2009 8:37 PM
besides a lot of scraping, what's the best thing i can use to remove the chrome from a mack DM 800 kit? any help would be appreciated. thanks
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.