- Member since
December 2003
|
Posted by Enzo_Man
on Sunday, December 7, 2003 10:09 PM
Your talking about the Revell Model, right? I don't have any referance pics but I can tell you about how I detailed mine. First, the dual Mags. A wire from each mag goes to the plugs (2 on each cylinder). The dual fuel pump is a little tricky. Looking at the front, the left pump has only one line that loops over to the right pump, the little fitting in the middle. Under the Air scoop you need to make a fuel box. The top fitting on the right pump goes to the box and the two lines on the side go to the box too. You need to make another fuel box to go behind the blower. Two lines come off the front fuel box to the back of the rear one. Then little lines (16) come out of this. Eight on each side. Four go under the air scoop the other four go to the manifold. This is for each side. On mine I put on the clutch cable, throttle cables, brake rod and lines, chute release cables, and others. If you want more info lemme know, I'll be glad to help. I'll work on getting pics of my model to give you referance.
Aerodynamics is for people who can't build engines.
|