SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Revell 2010 Ford Shelby.

3130 views
18 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2003
Posted by rangerj on Monday, June 10, 2013 3:45 PM

Testors produces enamel, acrylic, and lacquers and thinners for each. You generally CAN spray enamel over lacquer as long as the lacquer is dry, but you generally cannot spray lacquer over enamel. There are some other variations like varnishes, urethanes, and varithanes, etc. and they are not all compatible with plastic. The safest thing to do is use paints made for plastic and do not mix types of paints and use the correct thinner.

  • Member since
    July 2005
Posted by Lloyd on Friday, June 7, 2013 11:13 PM

Testors is enamel? Or laquer? Is the problem here that I sprayed clear enamel over laquer?

  • Member since
    March 2003
Posted by rangerj on Friday, June 7, 2013 12:58 PM

NOTE: This is a good example of why NOT to mix paint brands. If you use Testors paint then use Testors clear coat. While you can use a laquer primer and spray enamel over it, you generally cannot spray laquer paint over enamel. Even some enamel paints are "aggressive" and will attack other enamels. Some paints will attack the plastic, e.g. real automotive paints not made for plastic. A good primer and or barrier can protect the plastic. Also note that some paints are hazardous and can attack your lungs or poison you through your skin. If you are not sure stick with paints made for models and use the same brand of thinner, primer, paint, and clear coat on any given project.

  • Member since
    August 2007
  • From: back country of SO-CAL, at the birth place of Naval Aviation
Posted by DUSTER on Friday, May 31, 2013 5:02 PM

Lloyd

Ok, I gave it 4 or 5 days to dry before the clear went on. I did lay the MM blue on pretty thick, so that might be part of it.  I'll see if I can sand it and do a retouch later on,  I'm lucky it only occurred on some isolated areas away from the main stripes.

I thought it was Testors Enamel- not trying to be hicky-picky- just trying to understand the various solutions offered, vies a vie, the brands vs the type of paint/clear.
Though regardless, any enamel that is thick, will take a longer time to dry; which is problematic when covered with another coat.
Anywho don't give up on the car its looking like a fine project so far.

Steve

Building the perfect model---just not quite yet  Confused

  • Member since
    April 2008
  • From: Maryland
Posted by cruz on Friday, May 31, 2013 1:54 PM

Use Testor's Wet Look clear over enamel, it will not attack the enamel and works better than Tamiya clear.....

  • Member since
    July 2005
Posted by Lloyd on Friday, May 31, 2013 7:05 AM

Thanks, I was happy with the engine. Although it's hard to display with the way the hood is hinged. I hope I can save the paint job, I'll soon see anyway.

  • Member since
    June 2010
  • From: Australia
Posted by OctaneOrange on Friday, May 31, 2013 4:33 AM

well, i like how this looks. the engine is awesome. it's good they've added a bit more detail (normally their 1/12 kits are same as the 1/25s)

  • Member since
    July 2005
Posted by Lloyd on Friday, May 31, 2013 3:15 AM

Ok, I gave it 4 or 5 days to dry before the clear went on. I did lay the MM blue on pretty thick, so that might be part of it.  I'll see if I can sand it and do a retouch later on,  I'm lucky it only occurred on some isolated areas away from the main stripes.

  • Member since
    March 2006
Posted by TD4438 on Friday, May 31, 2013 2:42 AM

WTF happened????

That really sucks!

  • Member since
    July 2005
Posted by Lloyd on Friday, May 31, 2013 12:55 AM

Tamiya clear coat goes on.

And this is the point where I pack the kit away in a box for a few years while I move onto something else...

 image hosting more than 5mb

 screenshot software for windows

 download screenshot

 windows screenshot

  • Member since
    July 2005
Posted by Lloyd on Friday, May 31, 2013 12:53 AM

Decals going on, couldn't be happier with the result so far...

 screenshot windows

 upload pictures free

 

  • Member since
    July 2005
Posted by Lloyd on Sunday, May 26, 2013 9:55 PM

Thanks. It's the Revell 1/12 kit, and very nice it is too. I have had the Doyusha 1/12 Countach and Corvette in my collection for years so I thought this would be a good test run, especially with the gloss finish, which in this case is a mixed result. The top surfaces of the body, the front and back are nice, but the sides ended up with an egg-shell finish. I hope that once it's decalled and I do a clear coat  these problems will be reduced. Just looking at the model now it looks quite good anyway, shiny in all the right places. I re-chromed the wheels with an auto-spray which worked out well.

The colour used is Testors Grabber blue. Next time I'll use a proper high pressure spray gun, because spray cans seem inadequate for painting a large scale car.

 photo hosting sites

 free screenshot software

 image sharing

 how to do a screenshot on a pc

 how to take a screenshot on a pc

 

 

 

  • Member since
    November 2003
  • From: State of Mississippi. State motto: Virtute et armis (By valor and arms)
Posted by mississippivol on Sunday, May 26, 2013 1:48 PM

Wonderful detailing on the engine. Are you building the 1/16th scale Mustang?

  • Member since
    July 2006
Posted by Scotty T on Sunday, May 26, 2013 11:42 AM

Beautiful. I have that kit?  How is it going together?  What blue did you use?  Looks awesome!

  • Member since
    March 2006
Posted by TD4438 on Sunday, May 26, 2013 10:16 AM

Nice progress so far.

  • Member since
    July 2005
Revell 2010 Ford Shelby.
Posted by Lloyd on Saturday, May 25, 2013 9:02 AM

Work in progress shots. Next stage for the body is decals and clear coat.

 image hosting over 10mb

 screen shot windows 7

 images

 picture host

 upload pictures free

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.