SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Mefistofele WIP and finished

3340 views
17 replies
1 rating 2 rating 3 rating 4 rating 5 rating
dlh
  • Member since
    March 2017
  • From: Chambersburg, PA
Posted by dlh on Wednesday, May 22, 2019 11:21 AM

Tanker - Builder

Heavens to Murgatroyed :

     Now that is as beautiful auto work as I have seen in a while. Very good attention to the detail. Bondic makes great instrument lenses doesn't it? I do have to ask. Is this one of their Larger scale kits? Beautiful Work everywhere ! T.B.

 

Thanks.  Yes, it's 1/12.

  • Member since
    June 2014
  • From: New Braunfels , Texas
Posted by Tanker - Builder on Wednesday, May 22, 2019 8:10 AM

Heavens to Murgatroyed :

     Now that is as beautiful auto work as I have seen in a while. Very good attention to the detail. Bondic makes great instrument lenses doesn't it? I do have to ask. Is this one of their Larger scale kits? Beautiful Work everywhere ! T.B.

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Monday, May 20, 2019 3:14 PM

Dave,

I'd say you did Harry proud then.

Thanks for the further info, explanation of 'Mefistofele", and the link to the very cool youtube video.

As I said, after I saw yours I wanted one even more, now exponentially so after having seen that video, even though I know I'd butcher the poor thing compared to the job you did.

Thanks again.

dlh
  • Member since
    March 2017
  • From: Chambersburg, PA
Posted by dlh on Monday, May 20, 2019 3:14 PM

kensar

Nice job on this.

 I believe these were originally kitted by Protar.

 

Yes, in diecast I think.  I look at the vintage kits on ebay.

Thanks

  • Member since
    September 2017
  • From: western North Carolina
Posted by kensar on Monday, May 20, 2019 2:11 PM

Nice job on this.

I believe these were originally kitted by Protar.

Kensar

 

dlh
  • Member since
    March 2017
  • From: Chambersburg, PA
Posted by dlh on Monday, May 20, 2019 9:37 AM
dlh
  • Member since
    March 2017
  • From: Chambersburg, PA
Posted by dlh on Monday, May 20, 2019 9:30 AM

fox

W - O - W!!!!!!!!!! Bow Down Bow Down

Jim  Captain

 

Thanks,

Dave

dlh
  • Member since
    March 2017
  • From: Chambersburg, PA
Posted by dlh on Monday, May 20, 2019 9:29 AM

Greg

 

 
dlh

 Yes Italeri, Mefistofele.

 

 

 
BTW, Italeri I understand. 'Mefistofele', not so much. Could you enlighten me, please? It's on the box cover, I just don't know what it means. The car model, perhaps?
 

The car was a one-off to set a land speed record. The engine is an aircraft engine.  It was named Mefistofele for the infernal noise it made. The history of this car is fascinating.  There's a good bit of info on the web.  Here's a vid of the car running.  Just the startup procedure is amazing. It's in German but you don't really need narration:

https://www.youtube.com/watch?v=u1qvH085rKY

 

Dave

dlh
  • Member since
    March 2017
  • From: Chambersburg, PA
Posted by dlh on Monday, May 20, 2019 9:22 AM

Greg

 

 
jeffpez
I've coveted this kit for a long time.......

 

As have I. It is a treat to see one built up. Even more so yours, because your workmanship is supurb. Yes

Are the basswood parts included in the kit or did you scratch build them?

 

No the basswood idea comes from the late Harry Pristovnik.  Another build shows faux wood grain on the plastic floor, but I didn't like that very much. I made patterns from the included plastic floor and firewall.  Harry used cardboard for backing and styrene strips on the body shell to support it. I made the floor sit on the frame like the kit floor.  It did require some supporting blocks that you can see in the photos.  It took me a while to decide on stain color for the wood and to find the tiny brass nails.  Technique is Harry's.

dlh
  • Member since
    March 2017
  • From: Chambersburg, PA
Posted by dlh on Monday, May 20, 2019 9:16 AM

jeffpez

Amazing work. I've coveted this kit for a long time but get put off by the price and concerns that it's not well engineered. How did it go together? Can someone with less skill then you get a decent result? Thanks again for sharing  

 

I did a lot of research.  Most skill comes from the late Harry Pristovnik.  There are a couple of mistakes in the instructions.  Biggest challenge was probably the chains.  I've seen replacements but thought the originals looked best.  Engineering of the kit is pretty good.  The engine is like a model in itself.  Lots of fiddly piping and wiring.  Not too bad if you take your time.  I look at these big models as learning experiences.  I think anyone with patience will get a decent result.

Dave

  • Member since
    November 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Monday, May 20, 2019 8:49 AM

Absolutely beautiful!!

Don Stauffer in Minnesota

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Sunday, May 19, 2019 4:09 PM

dlh

 Yes Italeri, Mefistofele.

 

 
BTW, Italeri I understand. 'Mefistofele', not so much. Could you enlighten me, please? It's on the box cover, I just don't know what it means. The car model, perhaps?
  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Sunday, May 19, 2019 4:04 PM

jeffpez
I've coveted this kit for a long time.......

As have I. It is a treat to see one built up. Even more so yours, because your workmanship is supurb. Yes

Are the basswood parts included in the kit or did you scratch build them?

  • Member since
    July 2008
  • From: Summerville, SC
Posted by jeffpez on Sunday, May 19, 2019 3:36 PM

Amazing work. I've coveted this kit for a long time but get put off by the price and concerns that it's not well engineered. How did it go together? Can someone with less skill then you get a decent result? Thanks again for sharing  

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Sunday, May 19, 2019 3:21 PM

W - O - W!!!!!!!!!! Bow Down Bow Down

Jim  Captain

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

dlh
  • Member since
    March 2017
  • From: Chambersburg, PA
Posted by dlh on Sunday, May 19, 2019 2:11 PM

keavdog

That is really nice!. Is that a kit?  If so who makes it?  Really beautiful work.

 

Yes Italeri, Mefistofele.

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Sunday, May 19, 2019 1:26 PM

That is really nice!. Is that a kit?  If so who makes it?  Really beautiful work.

Thanks,

John

dlh
  • Member since
    March 2017
  • From: Chambersburg, PA
Mefistofele WIP and finished
Posted by dlh on Sunday, May 19, 2019 1:21 PM

I've had this done for a while.  Thought some might like pictures.

Copper is bare metal foil

Redid toggle switches to four; can't remember where I got them

Flattening chain links using temp controlled iron and teflon strip

model vise to press chain layers together while flattening links

Reasonable result, needs smoothing

That's a big dime!

Gauge lenses are Bondic

Wrapped springs then beeswaxed, little black pigment powder.

 

Made plug terminals by squashing copper wire, then drilling hole.

Spark plugs are, I think, RB Motion

Bare metal foil copper cladding

Some underside, backside mods adjustments. Floorboard is basswood base with planks on top, brass nails for screws.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.