SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Gunnar 966 Brumos Sebring 1992 [FINISHED]

2348 views
14 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2020
Gunnar 966 Brumos Sebring 1992 [FINISHED]
Posted by Scale-Master on Saturday, August 7, 2021 8:58 PM
1/43rd resin kit by Starter.
I started on the body first and fitted the brass parts to it.  As clean as the casting was it still needs a good amount of attention.  But it's getting close to ready for paint.

Build what you want and build it for yourself, the rest will follow... Mark D. Jones

  • Member since
    October 2020
Posted by Scale-Master on Monday, August 9, 2021 8:17 PM

The body is getting more fine tuning and light hits of primer so while that dries I tackled the rear wing, four pieces here… and counting.

Build what you want and build it for yourself, the rest will follow... Mark D. Jones

  • Member since
    October 2020
Posted by Scale-Master on Tuesday, August 10, 2021 8:45 PM
Paint is on this one too… More Tamiya lacquer.

Build what you want and build it for yourself, the rest will follow... Mark D. Jones

  • Member since
    October 2020
Posted by Scale-Master on Thursday, August 12, 2021 2:14 PM
Like the 911, I hand painted the black details first.

Build what you want and build it for yourself, the rest will follow... Mark D. Jones

  • Member since
    October 2020
Posted by Scale-Master on Thursday, August 12, 2021 7:56 PM
The decals on this one are not quite as user friendly as the ones for the 911.  A little thinner and more brittle, and more sensitive to the same decal solvent.   A hair dryer is very helpful with these decals.
And it's not that they don't fit, I think it's more of an issue that the body is not as symmetrical as it looks.
No way to mistake this as a street car, but the graphics are clean nonetheless.

Build what you want and build it for yourself, the rest will follow... Mark D. Jones

  • Member since
    June 2014
Posted by BrandonK on Friday, August 13, 2021 12:37 PM

That looks super nice. How many kits do you have working at the moment?

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    October 2020
Posted by Scale-Master on Friday, August 13, 2021 3:10 PM

Actively I have three right now since I finished the Stingaree for the FSM review. 

But I may start something else when these are done even though I should be working on the Lola.

It's not uncommon for me to have several going at any given time.

Build what you want and build it for yourself, the rest will follow... Mark D. Jones

  • Member since
    October 2020
Posted by Scale-Master on Friday, August 13, 2021 3:10 PM
The wheels are four piece affairs, all brass with PE centers.  The center nuts will be installed after the rims are painted.

Build what you want and build it for yourself, the rest will follow... Mark D. Jones

  • Member since
    October 2020
Posted by Scale-Master on Friday, August 13, 2021 5:26 PM
All the decals have been applied. Many of them are oversized and the Goodyear for the nose was not included.  But I had an extra one from the 911 and while it too is a little oversized it doesn't really matter to me at this point.

Build what you want and build it for yourself, the rest will follow... Mark D. Jones

  • Member since
    October 2020
Posted by Scale-Master on Sunday, August 15, 2021 5:21 PM
Wheels and tires are done…

Build what you want and build it for yourself, the rest will follow... Mark D. Jones

  • Member since
    October 2020
Posted by Scale-Master on Saturday, August 28, 2021 1:38 PM
Finished.
Not the best (accuracy) version in this series of 1/43rd Starter 966s.  But a pretty car for sure and a fun side project.

Build what you want and build it for yourself, the rest will follow... Mark D. Jones

  • Member since
    June 2021
Posted by rocketman2000 on Sunday, August 29, 2021 8:56 AM

Very nice!

Don Stauffer in Minnesota

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Sunday, August 29, 2021 9:53 AM

That turned out great.  Those rims are beautiful.  I've never done a 1/43 kit but I believe there is a wealth of subjects in that scale.  Perhaps when my shelves start to fill up ;)

Thanks,

John

  • Member since
    June 2014
Posted by BrandonK on Sunday, August 29, 2021 12:53 PM

Beautifully done. That looks amazing.

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    October 2020
Posted by Scale-Master on Monday, August 30, 2021 8:12 PM

Thanks Guys!

Build what you want and build it for yourself, the rest will follow... Mark D. Jones

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.