SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Doyusha 1/200 DC8-61 Japan Air Lines

2259 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2020
Doyusha 1/200 DC8-61 Japan Air Lines
Posted by RickS on Monday, April 20, 2020 10:50 AM

Starting my next project, and hoping it gives me the opportunity to try out some of the techniques I've learned here and watching you tube.

The Doyusha 1/200 DC8 is a pretty basic kit, but so far, the fit of the parts is quite good, and no warping of the wings at all (that my naked eye can detect).  The decals are Japan Airlines from the 70's, from Cartograf, they look pretty good.

Anyone familiar with this kit?  Any tips or things to look out for?  All input is appreciated.

  • Member since
    September 2012
Posted by GMorrison on Monday, April 20, 2020 11:04 AM

It looks nice on Scalemates. Absolutely cram all of the weight you can into the nose.

 Modeling is an excuse to buy books.

 

  • Member since
    April 2020
Posted by RickS on Saturday, April 25, 2020 9:37 PM

Been working on the 8 bit by bit while finishing up the Glencoe/Hawk Vickers Viscount.  Got the fuse halves together and the cabin windows filled in.  Still have a bit more filler to add... it seems to shrink and dimple as it dries .  Not many parts in this kit, so should be a quick build, except for paint and finishing.  I'm applying lessons learned on the Viscount and tips and tricks learned here to hopefully make this one better.

  • Member since
    April 2020
Posted by RickS on Friday, May 1, 2020 10:44 AM
Been doing a little work here and there, and have been thinking about paint.... I'm doing it gear-up, so no worries about trying to paint the tiny undercarriage, and at this scale, (and my skill level!) I'm not worrying about detail, as it will be on the stand. I do, however, want the paint to look beileveable, and my problem is how to mask the wing-to-body fairings. Masking at such a small scale and with such small curves is something I don't know how to do well. Any suggestions? Thanks in advance!
  • Member since
    September 2012
Posted by GMorrison on Friday, May 1, 2020 10:54 AM

Similar to the boot stripe on a ship.

Start with a very thin strip of tape, say 1/32" or so wide.Then repeat with a wider strip, say 1/16". You may be using segments at this point.

Now you can tile the mask with short  pieces of 9mm tape.

 Modeling is an excuse to buy books.

 

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Monday, May 4, 2020 1:20 PM

Hi;

 Morrison's advice is solid. My take is to put foil chrome on it as the mask. This works for me.

  • Member since
    April 2020
Posted by RickS on Monday, May 4, 2020 1:31 PM

So I've been scouring the internet for good pics of the wing-to-body fairings on a JAL DC-8-61, and they are hard to find.  I did, however find this very good pic of a UAL DC-8.  The WTB fairings are decidedly metal, and not painted grey.  Which makes me wonder, were JAL's painted grey.  If they are metal, it makes no sense that they would be, yet the instructions show them as grey...   Any fellow airliner enthusiasts out there able to enlighten me?  My life would be a whole lot easier if I didn't have to mask off the WTB fairings!

  • Member since
    September 2012
Posted by GMorrison on Monday, May 4, 2020 1:52 PM

Here's another picture of your bird, this one at Hong Kong.

https://www.planepictures.net/v3/show_en.php?id=701796

I'm sure those fairings are metal, they just contrast a little.

Those stretch jobs were a nightmare, although I always thought they looked good.

70 more seats and NO added restrooms!

 Modeling is an excuse to buy books.

 

  • Member since
    April 2020
Posted by RickS on Monday, May 4, 2020 2:06 PM

Thanks GM!  I found the same pic, and for sure, the fairing at the LE of the wing is metal.  Have not been able to find a good pic of a JAL bird showing the fairing at the TE, but it's hard to imagine it would be anything other than metal now that I've done some research.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.