SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

help with using Sculpey

672 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Posted by Anonymous on Friday, January 14, 2005 8:31 PM
Thanks for all your input! I ended up taking the hats off and baking them,came out so-so,the the figurines(sailors) are going into a show, again thanks for your helpSmile [:)]
  • Member since
    June 2004
  • From: Western Canada
Posted by ghamilt1 on Wednesday, January 12, 2005 3:42 PM
I would like to recommend "MagicSulp" two part epoxy putty. It has a working time of about 30-45 minutes, can be smoothed out and blended with a wet paint brush, and filed and sanded when dry. It can also be rolled out to a very thin consistency for use as bedrolls, straps, bekts and even hat brims! It also does not require any "cooking" as it cures on its own. I bought a couple of 1 pound containers 4 years ago, and It's still as good as the day I received it.
  • Member since
    April 2003
  • From: Sunny Florida
Posted by renarts on Sunday, January 9, 2005 8:47 PM
In the future, I highly reccomend Aves Apoxie.
non toxic, air dries and easily sculpts, files, sands and paints.
You can do figure sculpts with it, filler, zim on tanks, you name it.
Mike "Imagination is the dye that colors our lives" Marcus Aurellius A good friend will come and bail you out of jail...but, a true friend will be sitting next to you saying, "Damn...that was fun!"
  • Member since
    November 2005
Posted by Anonymous on Sunday, January 9, 2005 4:45 PM
Sculpey is best used to sculpt new figs, because you need to bake it to harden it makes it fairly unuseable to sculpt details on plastic figures.

One of the reasons why I prefer polyester and epoxy putties, for fine details I found the best stuff to be Alteco SSP-HG.
Granted you don't have infinite work-time with those as you got with scupley.

HTH.
  • Member since
    November 2005
Posted by Anonymous on Sunday, January 9, 2005 2:56 PM
If the hats aren't attached to the figures & aren't too thick, you can cure them with an automotive heat gun. Keep the gun moving so you don't scorch the sculpy. Once it goes from shiny to dull, it's hardened.
  • Member since
    November 2005
help with using Sculpey
Posted by Anonymous on Sunday, January 9, 2005 11:51 AM
I just completed moulding some hats on some Tamiya figurines,whats the best way to harden the clay? The directions call for a 275 oven heat,but I dont know how this would effect the plastic figures.
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.