SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Cows

1939 views
14 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2003
  • From: Burlington, Ontario Canada
Posted by gburdon on Wednesday, March 29, 2006 9:57 PM
 grizz30_06 wrote:

Now that is just low...funny...but low.  Actually, I am getting back into the cattle business with my father and a friend of mine.  We have a cow that will be dropping a calf next month.  My friend said he wants to name if after his wife.  I asked him if he had disscussed this with her, he said yea she doesn't care.  I asked her about it and her answer was a bit ... different.  I always tell him he should think things over a bit before jumping in, it don't do no good.

Grizz

Grizz;

I just read your post and it reminded me of how our German Sheperd was named and the uproar it caused with my In-Laws.

My wife and I were originally to be married on 20 June 2002, but because of a lot of bickering between the In-Laws as to who would pay for what etc. etc. we postponed and eventually eloped.

Anyway on the date we were to be walking down the aisle, my wife and I were walking around the local mall instead. It was during this walk that we saw a display for the local animal rescue with a cute 9 week old female German Sheperd puppy. Well we all know once you see it you have to have it (Works the same with model kits and pups for me). We immediately signed up to adopt the pup but were told that someone had beat us to the adoption. Well, my wife definitely wanted a puppy so we went home and looked through the papers and found an ad for Sheperd pups. So after an hour long car ride we came to the most run down shack of a house. Needless to say I wasn't going to let the pup stay another minute in that dump. So as we were homeward bound we began to discuss names, and I suggested because of the date we should name her Mary my wife agreed and thought it was more than fitting.

It wasn't until afterwards that we realized (actually a relative pointed out) my mother-in-law's name is Mary.......ooops! So we explained when my in-laws arrived that the spelling was M-A-R-R-Y. 

We eloped and married in Guysborough, Nova Scotia on the ocean front a short time later. The dog was given a pedigree name so as not to be confused with my mother in law ever again. Mary Alexander Keith's after Nova Scotia's gift to the world Alexander Keith's India Pale Ale. 

Long story short.... always think before you name something.

Cheers;

Gregory  

VETERAN - (Noun) - Definition - One who signed a blank cheque as: “Payable to The People of Canada, Up To and Including My Life."
  • Member since
    March 2005
  • From: The Red Hills of South Carolina
Posted by grizz30_06 on Monday, March 6, 2006 11:10 AM

Now that is just low...funny...but low.  Actually, I am getting back into the cattle business with my father and a friend of mine.  We have a cow that will be dropping a calf next month.  My friend said he wants to name if after his wife.  I asked him if he had disscussed this with her, he said yea she doesn't care.  I asked her about it and her answer was a bit ... different.  I always tell him he should think things over a bit before jumping in, it don't do no good.

Grizz

Denial, it's not just a coping mechanism, it's a way of life.
  • Member since
    July 2013
Posted by DURR on Sunday, March 5, 2006 2:06 PM
if you want a 1:1 size cow i have this ex girlfriend and..........
  • Member since
    November 2005
Posted by Anonymous on Tuesday, February 28, 2006 1:58 PM

grizz30_06 

Hi this is no joke mate verlinden do a set of two cows, if you want to take a look at then the only web site i know of is www.historex.com its based in the U.K if you log to their site & enter in the product code box No 1431 they are in 1/35. Hope this helps.

  • Member since
    January 2006
  • From: Baton Rouge, Snake Central
Posted by PatlaborUnit1 on Sunday, February 26, 2006 6:52 PM
Yanno, I was so tied up finishing this thing for the county fair competition deadline (they came and moooooved it for us with a real cow trailer) that I never even thought much of theplanes and SAR helo up front other than screwing them to the deck with drywall screws thru the (empty) cockpits and sealing everythign up with some super duper craft glue that bonds anything.

Yep, that was  project to remember!!!


Build to please yourself, and don't worry about what others think! TI 4019 Jolly Roger Squadron, 501st Legion
  • Member since
    May 2005
  • From: Left forever
Posted by Bgrigg on Wednesday, February 8, 2006 2:37 PM
 PatlaborUnit1 wrote:
I did it with Kings county Scale Modelers in '02.  We were given a cow (1:1fibeglass) as part of a county fair paint up competition.  My directions were to turn iti into a full size cow/ aircraft carrier replica.  I worked on it for a month, and other club members helped with the flight deck, building the F18's, painting, etc.  Took Most Popular by people's choice vote and was auctioned off for the highest amount to a local Navy crewman. 

You can see it on my website at

http://www.angelfire.com/ca4/hlmp/beyond.html   and its near the bottom of the page.

So, its been done!!!  :-)

F-18's on a 1:1 Aircraft Cowier? Shouldn't they have been Cowsairs, or P-47 Jugs (of Milk)? Clown [:o)]

So long folks!

  • Member since
    January 2003
  • From: Burlington, Ontario Canada
Posted by gburdon on Wednesday, February 8, 2006 12:33 PM

Now I have seen everything! A 1:1 scale Cow kitbash!

I thought the city of Toronto was bad enough with the Fibreglass Moose campaign a few years ago. But this is even better. Thanks.

Cheers;

Gregory

VETERAN - (Noun) - Definition - One who signed a blank cheque as: “Payable to The People of Canada, Up To and Including My Life."
  • Member since
    January 2006
  • From: Baton Rouge, Snake Central
Posted by PatlaborUnit1 on Wednesday, February 8, 2006 12:11 PM

I did it with Kings county Scale Modelers in '02.  We were given a cow (1:1fibeglass) as part of a county fair paint up competition.  My directions were to turn iti into a full size cow/ aircraft carrier replica.  I worked on it for a month, and other club members helped with the flight deck, building the F18's, painting, etc.  Took Most Popular by people's choice vote and was auctioned off for the highest amount to a local Navy crewman. 

 

You can see it on my website at

http://www.angelfire.com/ca4/hlmp/beyond.html   and its near the bottom of the page.

So, its been done!!!  :-)

 

Build to please yourself, and don't worry about what others think! TI 4019 Jolly Roger Squadron, 501st Legion
  • Member since
    March 2005
  • From: The Red Hills of South Carolina
Posted by grizz30_06 on Thursday, February 2, 2006 3:13 PM

1/160!  Wow I guess it shows that I am not into RR.

Grizz

 

Denial, it's not just a coping mechanism, it's a way of life.
  • Member since
    June 2005
  • From: NJ 07073
Posted by archangel571 on Thursday, February 2, 2006 3:17 AM

Don't believe I have seen cows in plastic in 1/35...  Tamiya makes their live stock set in 1/35 though, you get a mule and pigs and ... stuff.

For 1/35 you should probably look at 1/32 or G gauge.  N gauge is like 1/160 something, really tiny.

-=Ryan=- Too many kits... so little free time. MadDocWorks
  • Member since
    November 2005
Posted by Anonymous on Wednesday, February 1, 2006 4:27 PM

Don't believe I've ever seen a 1:1 cow figure in a show. Go for it!!!!

  • Member since
    December 2002
  • From: Massachusetts
Posted by ajlafleche on Wednesday, February 1, 2006 3:55 PM

Remember, if the women don't find you handsome, they should at least find you handy.

  • Member since
    March 2005
  • From: The Red Hills of South Carolina
Posted by grizz30_06 on Wednesday, February 1, 2006 2:24 PM

Sorry to not mention the scale I was thinking 1/35 or N scale (I believe).  I know that I can buy a beat-up full size like what once was on Bi-Lo for US$1500 or so.  I would like to spend less.

Grizz

Denial, it's not just a coping mechanism, it's a way of life.
  • Member since
    December 2002
  • From: Massachusetts
Posted by ajlafleche on Tuesday, January 31, 2006 10:04 AM

What do you consider small scale? There are plenty of cattel in HO and other railroad scales.

 

Remember, if the women don't find you handsome, they should at least find you handy.

  • Member since
    March 2005
  • From: The Red Hills of South Carolina
Cows
Posted by grizz30_06 on Tuesday, January 31, 2006 9:47 AM

I am looking for some small scale cattle.  Really a medium framed short legged cow with medium length curving horns.  Any suggestions.

Grizz

Denial, it's not just a coping mechanism, it's a way of life.
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.