SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Outlining figure detail.

3573 views
15 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2006
Outlining figure detail.
Posted by Hightower on Wednesday, October 4, 2006 7:03 PM

Does anyone have any good shots of 1/35 scale or references about outlining their figures, I mean the web gear, folds, creases etc.

Thanks.

  • Member since
    February 2003
  • From: Indiana, USA
Posted by cassibill on Wednesday, October 4, 2006 7:06 PM
Kalmbach has a really good book on painting figures. It is worth picking up.

cdw My life flashes before my eyes and it mostly my life flashing before my eyes!!!Big Smile The 1/144 scale census and message board: http://144scalelist.freewebpage.org/index.html

  • Member since
    December 2002
  • From: Massachusetts
Posted by ajlafleche on Wednesday, October 4, 2006 10:17 PM
This is where a wash works really well, especially with artists' high quality oils. Make a mixture that will draw itself alonf a thin engraved line on a junk model or figure. Touch a brushful at the edges of equipment after it's been painted. The wash will draw itself alonmg hte edge by capilary action. FOr older figures with softer detail, run a dental pick along these edges to acentuate them.

Remember, if the women don't find you handsome, they should at least find you handy.

  • Member since
    June 2003
  • From: Caput Mundi
Posted by Avus on Thursday, October 5, 2006 1:30 AM

As I stated somewhere else I don't like to work with oils (toxic fumes and shiny finish), so using a small (5/0) and very sharp brush with acrylics thinned with water will do the work , too.

I manage to do seam lines on 54mm figures as well as the web look of scottish tartans with this technique.

Klaus

Thanks to ImageShack for Free Image Hosting

  • Member since
    September 2006
thanks
Posted by Hightower on Thursday, October 5, 2006 8:14 AM

Thanks to all the responses, I'll look for that book and try those techniques.

Cheers

  • Member since
    November 2005
Posted by Anonymous on Thursday, October 5, 2006 7:43 PM
 Avus wrote:

As I stated somewhere else I don't like to work with oils (toxic fumes and shiny finish), so using a small (5/0) and very sharp brush with acrylics thinned with water will do the work , too.

I manage to do seam lines on 54mm figures as well as the web look of scottish tartans with this technique.



You can seal it with dull coat when it dries. And if you use small quantities and spread it as far as you can, it dries to a nice satin finish and dries fairly quickly, usually overnight, and also without brush strokes. It almost looks airbrushed. I never have a problem with it being shiney.

 The odor, I can't help you with though. I just love the smell of oils, so it doesn't bother me, but the turpenoid can be bad. Nothing near as bad as standard model enamal thinners though.
  • Member since
    November 2005
Posted by Anonymous on Sunday, October 8, 2006 4:07 PM
Hi,
I had the same query on another site while trying to detail some old Tamiya figures.The advice that i was given  has worked out well!While the figure is in the building process  use a worn hobby knife to gently scribe out some depth along the shoulder straps and other details.Using this method allows the capillary action to really bring extra detail out.
Gino Poppe,a great figure painter gave  me some advice with  another method and that is using  a fine 5/0 brush with thinned down indian ink to carefully paint around webbings,straps etc.
Hope these tips can help you out,we are all on some type of learning curve!
Cheers,ShayWink [;)]

  • Member since
    November 2005
Posted by Anonymous on Sunday, October 8, 2006 4:40 PM
Remember though  if you are going to slosh the wash all around you might want a coat or two of Future(mandatory when using oils). I do this even with acrylics as i find they tend to not stay in the creases without a gloss coat.
  • Member since
    April 2011
Posted by hanse6 on Tuesday, April 26, 2011 1:49 PM

you can go here at http://www.ip-details.com and you can host you web , my friend suggest me to go this site it is working very good.

  • Member since
    November 2005
Posted by Anonymous on Tuesday, April 26, 2011 1:51 PM

First paint the web gear in black or dark brown then paint it the normal color...

  • Member since
    November 2005
Posted by Anonymous on Tuesday, April 26, 2011 2:02 PM

  • Member since
    December 2002
  • From: Massachusetts
Posted by ajlafleche on Tuesday, April 26, 2011 2:16 PM

5 year old thread resurrected by a spammer.

 

Remember, if the women don't find you handsome, they should at least find you handy.

  • Member since
    October 2010
  • From: Staten Island
Posted by BigDaddyBluesman on Friday, May 13, 2011 2:12 PM

I'm glad they did, those figures look really good, although kind of like transvestites, a little too much makeup..Big Smile.

  • Member since
    November 2005
Posted by Anonymous on Friday, May 13, 2011 2:40 PM

BigDaddyBluesman

I'm glad they did, those figures look really good, although kind of like transvestites, a little too much makeup..Big Smile.

Sorta like the fig in your avatar...Big Smile

  • Member since
    October 2010
  • From: Staten Island
Posted by BigDaddyBluesman on Friday, May 13, 2011 3:07 PM

The figure in my avatar is me, no makeup I am naturally beautiful in a manly sort of way.....ha ha.

  • Member since
    March 2010
  • From: Democratic Peoples Republic of Illinois
Posted by Hercmech on Friday, May 13, 2011 3:33 PM

BigDaddyBluesman

The figure in my avatar is me, no makeup I am naturally beautiful in a manly sort of way.....ha ha.

For a minute there I thought you said in a Manny sort of way.Indifferent


13151015

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.