SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Ok Star Trek Guys,.... I need some Info.....

1100 views
12 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2008
  • From: In transit to new location.
Posted by Puma_Adder on Sunday, November 23, 2008 7:24 AM
Laugh [(-D] Thanks boss. still have to wait to buy anything though.
Some people spend their whole lives wondering if they made a difference. Gundams don't have that problem.
  • Member since
    November 2007
  • From: North Carolina
Posted by u-boater on Sunday, November 23, 2008 12:02 AM

 Puma_Adder wrote:
hey, if i wanted klingons, id look in the toilet. Laugh [(-D] Just kidding. Big Smile [:D]

 

FEDERATION DOG!!! SoapBox [soapbox]

Just for that...I shall not tell you that  www.federationmodels.com  has them in stock in the MODEL KITS (styrene TREK) section.A little pricey,but they are listed as being in stock.

 

Wink [;)]Oops [oops]

www.resinilluminati.com
  • Member since
    December 2005
  • From: DSM, Iowa
Posted by viper_mp on Tuesday, November 18, 2008 8:15 PM

Here ya go. 

Don's Light & Magic makes all the lighting and resin goodies for Trek kits.

http://www.dlmparts.com/

Starfleet Models has a lot of stuff including kits.

 http://www.starfleet-models.com

And dont forget the best ref around, CultTVman.  Also has the best selection of all the aftermarket stuff.

http://www.culttvman.com

Rob Folden

Secretary / Webmaster- IPMS Plastic Surgeons Member at Large-IPMS Hawkeye Modelers

  • Member since
    May 2008
  • From: In transit to new location.
Posted by Puma_Adder on Tuesday, November 18, 2008 6:48 PM

new question,

any clue as to where I could order a lighting kit for the ship?

Thanks again!

 

     Jason.

Some people spend their whole lives wondering if they made a difference. Gundams don't have that problem.
  • Member since
    December 2005
  • From: DSM, Iowa
Posted by viper_mp on Monday, November 17, 2008 9:36 PM

Puma, Its around 20 inches long.  They tried to keep most of the ship models under the 22" mark set by the Enterprise kit from the First movie. 

In the past, I built the Kazon ship, a fully lit DS9, a studio model Klingon BOP, the Original Series Bridge, some figures, and a fully lit Ent-A.  Unfortunately, only the figures and Kazon ship survived. I do still have pics of the BOP though.  And I plan on rebuilding it.  This time with lights, and landing gear.  And I have the Enterprises from ST:2, 4, and 6. And the cut-away Enterprise.  And another DS9, which wont be lit, but it will have ships docked.

Now in CGI I have built much more.  Including roughly 15 bridges, a shuttlebay, and a few other odd rooms and a couple ships.  

Rob Folden

Secretary / Webmaster- IPMS Plastic Surgeons Member at Large-IPMS Hawkeye Modelers

  • Member since
    May 2008
  • From: In transit to new location.
Posted by Puma_Adder on Monday, November 17, 2008 7:31 PM
hey, if i wanted klingons, id look in the toilet. Laugh [(-D] Just kidding. Big Smile [:D]
Some people spend their whole lives wondering if they made a difference. Gundams don't have that problem.
  • Member since
    April 2006
  • From: Navan, Ontario
Posted by Jagdwolf on Monday, November 17, 2008 7:23 PM
Fortunately, I'm not one of those Star Trek Federation guys. The only ST models I own are the Klingon warships: K'tinga cruiser, Bird of Prey, Vor'Cha cruiser, Voodieh cruiser (ST-TNG finale) and Negh'Var battleship.
  • Member since
    May 2008
  • From: In transit to new location.
Posted by Puma_Adder on Monday, November 17, 2008 7:02 PM
Thanks guys. I will have to wait till next payday to order it, but I found one on evilbay for a good price. I honestly do not know why I got the urge to build this particular ship but I do know that its gona be one of the bigger challenges in modeling for me. anyone know how long/wide she is?
Some people spend their whole lives wondering if they made a difference. Gundams don't have that problem.
  • Member since
    December 2005
  • From: DSM, Iowa
Posted by viper_mp on Monday, November 17, 2008 6:22 PM
You're gonna be stuck with EvilBay for the Excelsior.  The Ent-B kit cant rellay be built as the NCC-2000, because the hull blisters were molded in, rather than an addition.  So you cant remove them.

Rob Folden

Secretary / Webmaster- IPMS Plastic Surgeons Member at Large-IPMS Hawkeye Modelers

  • Member since
    May 2008
  • From: Wherever the hunt takes me
Posted by Boba Fett on Monday, November 17, 2008 4:52 PM
I think I saw something on Evilbay...

  • Member since
    May 2008
  • From: In transit to new location.
Posted by Puma_Adder on Monday, November 17, 2008 4:47 PM
Do you know if this kit can be built as a normal Excelsior class, or just the Re-Fit?
Some people spend their whole lives wondering if they made a difference. Gundams don't have that problem.
  • Member since
    August 2005
  • From: Sydney, Australia
Posted by Phil_H on Monday, November 17, 2008 4:30 PM

I don't think I've seen the original Excelsior kit for many years. As far as I am aware, the closest one currently avaliable is the Platz rebox of the AMT kit offered as the Enterprise (NCC-1701-B).

HobbyLinkJapan currently has it listed as in stock. http://www.hlj.com/product/PLZUSS-01

  • Member since
    May 2008
  • From: In transit to new location.
Ok Star Trek Guys,.... I need some Info.....
Posted by Puma_Adder on Monday, November 17, 2008 3:57 PM

This question is more directed to the builders of the ships as oposed to the plain ordinary fans of the show.

Where can I find the 1\1000 NCC-2000 U.S.S. Excelsior kit?

I just suddenly wanted to build one due to the fact that the last question in the Sci-Fi trivia quiz had me looking here there and everywhere for info on starfleet ships of the line so to speak, and Excelsior is one of my favorites. Thanks.

 

    Jason.

Some people spend their whole lives wondering if they made a difference. Gundams don't have that problem.
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.