SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Some kits I would love to have/see in styrene......

10910 views
54 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2006
  • From: N. Georgia
Some kits I would love to have/see in styrene......
Posted by Jester75 on Friday, August 12, 2011 3:38 PM

Well, Netflix has added all of the Start Trek series to their instant watch and I have been watching Star Trek Voyager alot lately. I am about half way through season 4 and am just dying to get my hands on a kit of Voyager WITHOUT paying 60 bucks for it on eBay. Really wishing I wouldve picked one of these up back in the day when you could find them in the LHS. I emailed Round 2 Models and the response was that they had no plans to re-release Voyager at this time.Sad

Also, I would love to see the Event Horizon and the Lewis & Clark in plastic. Both of these are very attractive ships and would look great modeled, although the Event Horizon was a beast!!!

Anyways, just kinda thinking out loud here....I am jealous of those of you who have managed to get a Voyager for a decent price!!!

Eric

 

  • Member since
    February 2003
  • From: Allentown, PA
Posted by BaBill212 on Friday, August 12, 2011 3:48 PM

Wish you luck Eric,,, hope you find the kits............................

Enjoy the ride!

 

  • Member since
    January 2003
  • From: Washington, DC
Posted by TomZ2 on Friday, August 12, 2011 4:07 PM

Jester75

Also, I would love to see the Event Horizon and the Lewis & Clark in plastic. Both of these are very attractive ships and would look great modeled, although the Event Horizon was a beast!!!

I’d prefer another “Elsie”, the Robert Heinlein’s “Time for the Stars” torchship:


Occasional factual, grammatical, or spelling variations are inherent to this thesis and should not be considered as defects, as they enhance the individuality and character of this document.

  • Member since
    December 2006
  • From: N. Georgia
Posted by Jester75 on Friday, August 12, 2011 4:12 PM

Never seen nor heard of those, kinda interesting....

Eric

 

  • Member since
    August 2005
  • From: Sydney, Australia
Posted by Phil_H on Friday, August 12, 2011 8:40 PM

Jester75
I emailed Round 2 Models and the response was that they had no plans to re-release Voyager at this time.Sad

Did AMT/Round 2 even do Voyager? Voyager was licensed to Monogram.

Apparently, Voyager was repopped by Revell Germany in 2009 for the European market.  http://memory-alpha.org/wiki/Revell-Monogram

  • Member since
    December 2006
  • From: N. Georgia
Posted by Jester75 on Friday, August 12, 2011 10:19 PM

Guess not, but they certainly didnt admit to not owning the rights. Not sure where I got that from.

Eric

 

  • Member since
    January 2010
  • From: Nebraska, USA
Posted by CallSignOWL on Saturday, August 13, 2011 12:27 PM

I'd like to see some of the Halo stuff done in plastic. That'd be fun.

------------------------

Now that I'm here, where am I??

Moderator
  • Member since
    April 2006
  • From: my keyboard dreaming of being at the workbench
Posted by Aaron Skinner on Monday, August 15, 2011 10:06 AM

Serenity from "Firefly"

Spinner car from "Blade Runner"

Betty from "Alien Resurrection"

Battlestar Pegasus from NuBSG

Rodger Young from "Starship Troopers"

Hammerhead from "Space: Above and Beyond"

 

To name a few...

 

 

Aaron Skinner

Editor

FineScale Modeler

  • Member since
    October 2008
  • From: SE Pennsylvania
Posted by padakr on Monday, August 15, 2011 3:44 PM

Aaron Skinner

Serenity from "Firefly"

That would be cool.

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Monday, August 15, 2011 4:36 PM

My two cent wish list:

  1. Police Spinner from Blade Runner, 1/24 scale.
  2. Gunstar-1 from The Last Starfighter, 1/72 scale, with "Death Blossom" option.
  3. Darth Vader's TIE from Star Wars, 1/72 scale.
  4. TIE Bomber from Empire Strikes Back, 1/72 scale.
  5. Space Pod from 2001: A Space Odyssey, 1/24 scale.
  6. Discovery from 2001: A Space Odyssey, 1/350 scale.  (Yeah right, but since this is an idle day dream, why not?)

All the above by Fine Molds, if possible.

A decent (i.e. new tool) kit of the Klingon D-7 from the movies would be nice as well.  Too bad the companies that make Star Trek models all seem to be unable to produce crisp detail like FM can.  Oh, almost forgot about Babylon-5.  A Shadow Crab, Kosh's Ship, the Minbari White Star, and an Earth Omega Class destroyer would be awesome.  I know, ain't gonna happen.  Too bad, as the resin stuff is expensive, variable in quality, and hard to find.

I hope someone can dig out a Voyager kit for you at a reasonable price.  If you had a time machine, I could have sent mine to you at postage cost.  (I gave mine to a friend.)

Neal

 

 

“Ya ya ya, unicorn papoi!”

  • Member since
    December 2006
  • From: N. Georgia
Posted by Jester75 on Monday, August 15, 2011 5:53 PM

The Prometeus from Star Trek Voyager would be cool too, was just mean looking with four nacelles and that wedge shaped saucer section.

Eric

 

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Monday, August 15, 2011 6:02 PM

The Prometheus from Star Trek Voyager would be cool too, was just mean looking with four nacelles and that wedge shaped saucer section.

I concur!

“Ya ya ya, unicorn papoi!”

  • Member since
    December 2002
  • From: Fort Knox
Posted by Rob Gronovius on Monday, August 15, 2011 6:05 PM

I've got three of the Voyagers; one I bought when they first came out, one of the limited edition ones when they arrived and a third I bought that was in a mangled box in the clearance aisle in a Walmart a long time after the kit originally was released. Bad box, but untouched kit inside. The kits were not all that impressive, but were easily the best Star Trek kits of their time.

  • Member since
    December 2006
  • From: N. Georgia
Posted by Jester75 on Monday, August 15, 2011 10:47 PM

I envy you sir!! Is the limited edition you have the one with the open shuttle bay??

Eric

 

  • Member since
    December 2002
  • From: Fort Knox
Posted by Rob Gronovius on Tuesday, August 16, 2011 6:08 AM

Yes, the open bay and a few parts that were now molded clear like the deflector dish. The decal sheet is expanded and of a much higher quality than the first kit's decals. There are even decals that go behind the clear windows for some "interior" detailing.

  • Member since
    October 2007
  • From: Scotland
Posted by Milairjunkie on Tuesday, August 16, 2011 6:50 AM

SGU Destiny anyone?

  • Member since
    December 2002
  • From: Fort Knox
Posted by Rob Gronovius on Tuesday, August 16, 2011 7:10 PM

I would also like to see Fine Molds do a 1/72 scale B-Wing fighter. I would like it in 1/48 scale, but it would be very large; perhaps too large. The old MPC kit is long in the tooth and dates back to 1984; over 25 years old.

  • Member since
    January 2010
Posted by Klik on Thursday, August 18, 2011 10:28 AM

Rob Gronovius

I would also like to see Fine Molds do a 1/72 scale B-Wing fighter. I would like it in 1/48 scale, but it would be very large; perhaps too large. The old MPC kit is long in the tooth and dates back to 1984; over 25 years old.

Ditto with a Finemolds A-wing and TIE Defender (heck, any other TIE itenerations would be pretty sweet.) even in 1/72nd, the detail is amazing.

oneyearwar1

The hardest part of flying isn't flying...it's landing.

  • Member since
    October 2009
  • From: Houston, Texas
Posted by Medicman71 on Thursday, August 18, 2011 11:02 AM

padakr

 Aaron Skinner:

Serenity from "Firefly"

 

That would be cool.

Ditto

Building- (All 1/48) F-14A Tomcat, F-16C Blk 30, He 129

 

  • Member since
    August 2011
  • From: Earth, for now
Posted by BashMonkey on Saturday, August 20, 2011 12:17 PM

Aaron Skinner

Serenity from "Firefly"

Spinner car from "Blade Runner"

Betty from "Alien Resurrection"

Battlestar Pegasus from NuBSG

Rodger Young from "Starship Troopers"

Hammerhead from "Space: Above and Beyond"

 

To name a few...

 

 

 

All of those are out there, or had been made, try 'Monsters in Motion' they have the best supply I've ever seen

http://monstersinmotion.com/

 

 

 ALL OF YOUR BASE ARE BELONG TO US!

  • Member since
    August 2011
  • From: Earth, for now
Posted by BashMonkey on Saturday, August 20, 2011 12:19 PM

From Trek; USS Daedelus class, from Wars; T-16 Skyhopper

 ALL OF YOUR BASE ARE BELONG TO US!

Moderator
  • Member since
    April 2006
  • From: my keyboard dreaming of being at the workbench
Posted by Aaron Skinner on Tuesday, August 23, 2011 4:54 PM

BashMonkey

 

 Aaron Skinner:

 

Serenity from "Firefly"

Spinner car from "Blade Runner"

Betty from "Alien Resurrection"

Battlestar Pegasus from NuBSG

Rodger Young from "Starship Troopers"

Hammerhead from "Space: Above and Beyond"

 

To name a few...

 

 

 

 

 

All of those are out there, or had been made, try 'Monsters in Motion' they have the best supply I've ever seen

http://monstersinmotion.com/

 

 

I think those are all resin, which is OK but I'm looking for them in styrene. Gotta love Monsters in Motion!

Cheers, Aaron

Aaron Skinner

Editor

FineScale Modeler

  • Member since
    September 2005
  • From: Illinois: Hive of Scum and Villany
Posted by Sprue-ce Goose on Tuesday, August 23, 2011 5:41 PM

Has Pegasus or any other company issued a styrene kit of the

20,000 Leagues Under The Sea Nautilus ?

Aaron Skinner

Gotta love Monsters in Motion!

Cheers, Aaron

Yes, people have since Lon Chaney played Phantom of the Opera.....

Wink

  • Member since
    December 2006
  • From: N. Georgia
Posted by Jester75 on Tuesday, August 23, 2011 9:22 PM

Aaron Skinner

I think those are all resin, which is OK but I'm looking for them in styrene. 

Ditto

Eric

 

  • Member since
    October 2009
  • From: Houston, Texas
Posted by Medicman71 on Wednesday, August 24, 2011 12:52 PM

Jester75

 Aaron Skinner:

I think those are all resin, which is OK but I'm looking for them in styrene. 

 

Ditto

DittoDitto

Building- (All 1/48) F-14A Tomcat, F-16C Blk 30, He 129

 

  • Member since
    December 2002
  • From: Fort Knox
Posted by Rob Gronovius on Wednesday, August 24, 2011 3:47 PM

Sprue-ce Goose

Has Pegasus or any other company issued a styrene kit of the

20,000 Leagues Under The Sea Nautilus ?

 

 

 

 

There has been at least one 20,000 Leagues Under the Sea Nautilus done in injection plastic, but not the more popular Disney version. Revell-Monogram released one based on a TV series for children called the Crayola Kids Adventures: 20,000 Leagues Under the Sea. Basically the story is done in one episode with children playing all the parts. You can IMDB the show and there are videos of the episode online.

My stepkids watched this series in the 1990s and I recall watching the 20,000 Leagues show with them. I think I got the kit in Walmart which was based on the Nautilus from this episode. It was a pretty good kit even though it was snap-tite. There was a large, clear portion of one side with stickers inside to represent interior detail. I found one on eBay for not a lot of money: The auction has a few additional photos of the kit inside the box. I have no connection to the seller. My kit was built and destroyed by the kids long ago.
http://www.ebay.com/itm/Nautilus-Submarine-Model-Peel-N-Stick-Decals-8-Up-/200641777468?pt=LH_DefaultDomain_0&hash=item2eb72e8f3c

  • Member since
    July 2003
  • From: Huntington, WV
Posted by Kugai on Sunday, September 4, 2011 2:31 AM

Aaron Skinner


Spinner car from "Blade Runner"

 

 

 

Take a look at HLJ.  They just started pre-orders on one from Fujimi.

http://i712.photobucket.com/albums/ww122/randysmodels/No%20After%20Market%20Build%20Group/Group%20Badge/GBbadge2.jpghttp://i6.photobucket.com/albums/y211/razordws/GB%20Badges/WMIIIGBsmall.jpg

  • Member since
    December 2002
  • From: Third rock from the sun.
Posted by Woody on Sunday, September 4, 2011 11:08 AM

Embrace resin kits and all your dreams will come true. LOL


" I wish to have no connection with any ship that does not sail fast; for I intend to go in harm's way." --John Paul Jones
  • Member since
    June 2010
  • From: Australia
Posted by OctaneOrange on Monday, September 5, 2011 12:10 AM

Kugai

 

 Aaron Skinner:

Spinner car from "Blade Runner"

 

 

Take a look at HLJ.  They just started pre-orders on one from Fujimi.

Only 30 years too late, but will be a welcome release!

  • Member since
    September 2006
  • From: Ridott, Illinois
Posted by Banshee1000 on Monday, September 5, 2011 2:53 AM

I've seen some kits were made of the Daedelus, but I can't find them anywhere.

I have an unopened 3-ship Voyager set.  I don't know how accurate it is.  I'm looking forward to buidling it soon (I'm in the middle of the Angel Rebirth anime and an Airbus 319...I'm trying to pace myself).

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.