SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

A Rebel Starfighter for Rebel Scum: MPC X-Wing

1572 views
18 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June, 2010
  • From: Rochester, New York USA
A Rebel Starfighter for Rebel Scum: MPC X-Wing
Posted by rocker286 on Monday, August 15, 2016 10:19 PM

If I were to go back to my parents house and dig through the darkest parts of their basement, I might be able to find a ton of old Star Wars books, some action figures, and maybe the original three movies on VHS. Star Wars had a huge impact on my friends and I. Growing up in the early to mid 1990's, we relished in the 20th anniversary merchandise that flooded the toy stores, exposing us to a world of starfighters, lightsabers, blasters and even wookies.

One of my friends from college met up with me about a year ago, and presented me with the old MPC X-Wing kit. Like my childhood buds, he too loved Star Wars. But he never had the time to build this X-wing, nor does he have the time now. He asked if I would build it for him, and of course I agreed. I'm finally getting around to it now myself! I'll be working on it while I have other projects going on, so updates may be few and far between. But I've got big plans for this kit. After all, my friend has been waiting to see this thing built since he was ten!

2016-08-15_10-49-12

3badges

  • Member since
    November, 2009
  • From: SW Virginia
Posted by Gamera on Tuesday, August 16, 2016 7:18 AM

Now this is going to be cool! I built one or two of the vintage MPC kits back in the day and remember they weren't well the most detailed or well-fitting around. Looking forward to you taking her on. 

Ya know I'd be very much tempted to subsitute one of the new better quality kits. Unless you friend is really into SW models he probably wouldn't notice the difference. Wink

"Fairy tales do not tell children the dragons exist. Children already know that dragons exist. Fairy tales tell children that dragons can be killed." -G.K. Chesterton

 

  • Member since
    February, 2014
  • From: Michigan
Posted by silentbob33 on Tuesday, August 16, 2016 9:25 AM
Very cool! I've built a couple of these too, but only one is surviving. I still have the parts of the other kit as well as a whole other kit in the stash. I'll be watching this for sure.

On my bench: AMT X-Wing (1/48ish?) rebuild

  • Member since
    December, 2002
  • From: Fort Knox
Posted by Rob Gronovius on Tuesday, August 16, 2016 10:23 AM

I've built this kit twice; once back when it was released after first movie and a reissue after Desert Storm in 1991. One of the things I remember about it was that the upper and lower fuselage halves don't quite line up. I think you have to add some scrap plastic to the inner edges of one side of the lower fuselage so that there isn't a gap.

Be careful with the old MPC/AMT/Ertl plastic; it is very soft and too much glue with cause it to melt.

  • Member since
    June, 2010
  • From: Rochester, New York USA
Posted by rocker286 on Saturday, September 17, 2016 2:04 PM

Thanks for the tip, Rob! I FINALLY started this X-wing today after a very busy few weeks at work. I used a very small amount of cement on the engine nacelles, and they went together without any difficulty. I'm hoping to do some more work on the fighter when I come home from work tonight!

2016-09-17_02-55-41

3badges

  • Member since
    November, 2009
  • From: SW Virginia
Posted by Gamera on Saturday, September 17, 2016 6:27 PM

Cool!!!

"Fairy tales do not tell children the dragons exist. Children already know that dragons exist. Fairy tales tell children that dragons can be killed." -G.K. Chesterton

 

  • Member since
    April, 2015
Posted by Mark Lookabaugh on Sunday, September 18, 2016 9:50 AM

"I might be able to find a ton of old Star Wars books, some action figures, and maybe the original three movies on VHS"

 

Exactly the same here.  Love this.  :)

  • Member since
    December, 2002
  • From: Fort Knox
Posted by Rob Gronovius on Sunday, September 18, 2016 11:13 PM

You're off to a good start. I've picked up a couple of the newer Revell Easy kits (snap together & pre-painted) on clearance at Hobby Lobby. One is Luke's X-Wing Red 5 and the other is the Resistance X-Wing from the Force Awakens.

  • Member since
    June, 2010
  • From: Rochester, New York USA
Posted by rocker286 on Monday, January 02, 2017 5:58 PM

I know I'm responding to all of you guys REALLY late, but Happy New Year! Hope you all had a great holiday season, and I really hope you all got a chance to see Rogue One! And that's the part of the reason I was able to get back on track with this build. I saw that film twice, and was reminded of the fact that I have an X-wing on my workbench that's just screaming to get worked on! So after I was done working on a 1:72 Thunderjet this morning, I switched gears (and galaxies) to my X-wing. I have the laser cannons all set to go, and I've started working on one of the wing sections. I gotta say, this build goes together pretty quick and easy!

2017-01-02_05-52-59

3badges

  • Member since
    June, 2010
  • From: Rochester, New York USA
Posted by rocker286 on Sunday, July 30, 2017 10:23 PM

Well after MONTHS of neglecting this build, I dusted off the part of my workbench where my X-wing kit was sitting....and started working on it again. I've got the wings assembled, and I'm working on the cockpit and figures now. The wings were a bit tricky, and the instructions weren't too clear about how far back/forward the laser cannons should be mounted. But, I managed to get everything looking good!

 

 

2017-07-29_06-40-14

3badges

  • Member since
    July, 2004
  • From: Sunny So. Cal... The OC
Posted by stikpusher on Sunday, July 30, 2017 11:05 PM

Well, at least you have plenty of reference photos at your fingertips...

nice to see this back in progress!

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    December, 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Monday, July 31, 2017 4:55 AM

Nice to see this up and running.

 ''I am a Norfolk man, and I glory in being so''

  

On the bench: Hasegawa 1/32nd Ju 87G-2

  • Member since
    June, 2010
  • From: Rochester, New York USA
Posted by rocker286 on Tuesday, October 10, 2017 10:44 PM

Darn! I let yet another few months pass by without any work being done on this X-wing. I can explain, I was involved three other group builds!

I finally put my Defiant down for long enough tonight to get some work done on this here starfighter. I painted the cockpit and decided to add a bit of interior detail to make it look more realistic. I've painted some of the buttons and dials different colors, and I've added solder to look like hoses and cables. The solder was attached with super glue, and tomorrow I'll be painting over it with different colors. It's also become apparent to me that the figure provided looks more like a Russian cosmonaut than an X-wing pilot. Though it WOULD look cool if a miniature Yuri Gagarin was at the controls, it wouldn't be accurate. I've got some sheet styrene that will be used to modify the helmet to make it look standard rebel issue. Here's a photo of the cockpit for now. I'll be working on the pilot figure tomorrow night.

2017-10-10_10-47-15

3badges

  • Member since
    June, 2010
  • From: Rochester, New York USA
Posted by rocker286 on Saturday, October 21, 2017 10:50 PM

I did a great deal of work on the pilot figure for the X-wing tonight. I completely overhauled the helmet, and added bits of styrene to make the helmet look more like what the pilots wear in the films. I've also added a small section on the front of the pilot, which will be the "chest box". I also had to make a new chin for the pilot after reshaping the helmet. It looks worse than it is, once I get some paint on this guy, it won't look half bad!

2017-10-21_09-59-30

3badges

  • Member since
    September, 2016
Posted by Retired In Kalifornia on Saturday, October 21, 2017 11:18 PM

Speaking Of X-Wings...

No Doubt This Digital Editing Classic

Is Posted Elsewhere On This Website

  • Member since
    June, 2010
  • From: Rochester, New York USA
Posted by rocker286 on Sunday, October 22, 2017 10:46 AM

Kalifornia - That's hilarious!  

3badges

  • Member since
    September, 2016
Posted by Retired In Kalifornia on Sunday, October 22, 2017 12:38 PM

rocker286

Kalifornia - That's hilarious!  

 

Its been up on the Internet "forever", brilliant pixel-level editing by whoever, good enough to frame!

  • Member since
    September, 2016
Posted by Retired In Kalifornia on Sunday, October 22, 2017 1:21 PM

OH, Lest I Forget:

  • Member since
    December, 2002
  • From: Fort Knox
Posted by Rob Gronovius on Sunday, October 22, 2017 8:47 PM

Gamera

Now this is going to be cool! I built one or two of the vintage MPC kits back in the day and remember they weren't well the most detailed or well-fitting around. Looking forward to you taking her on. 

Ya know I'd be very much tempted to subsitute one of the new better quality kits. Unless you friend is really into SW models he probably wouldn't notice the difference. Wink

 

I recently found a close out store that had a Revell 1/30th scale X-Wing. Very large and very nice kit.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS

SUBSCRIBER-ONLY CONTENT
FREE NEWSLETTER