SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

ETA 2 Finished!

1516 views
16 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
ETA 2 Finished!
Posted by stipp on Saturday, January 21, 2006 9:47 AM

hey people, I have finally finished the AMT ETA 2 from Star Wars Episode 3.

I ran into a few problems, one: I used rubber cement as a mask and when i sprated it onto my canopy the paint and rubber had a chemical reaction and "crazed" the clear, but I was able to vacuum form another canopy.

two: i used the mig pigments to weather the model and was ready to clear coat it, and for some stupid reason I got too close to the model and blew the chalk all over the model and had to strip the paint and clear off and repaint and reweather it once more.

http://img.photobucket.com/albums/v602/Stipp08/000_0829.jpg

http://img.photobucket.com/albums/v602/Stipp08/000_0825.jpg

http://img.photobucket.com/albums/v602/Stipp08/000_0826.jpg

  • Member since
    October 2004
  • From: Northern Indiana
Posted by overkillphil on Saturday, January 21, 2006 12:31 PM
Looks real nice.  Very effective weathering.  ( cna something that flies in outer space be 'weathered'?  Hmm, something to ponder)
my favorite headache/current project: 1/48 Panda F-35 "I love the fact that dumb people don't know who they are. I hope I'm not one of them" -Scott Adams
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Saturday, January 21, 2006 1:33 PM
A lot of these craft were used in atmospheric battles as well as in space too.
  • Member since
    December 2005
Posted by Mindless on Saturday, January 21, 2006 3:01 PM
Very impressive work. Good job on that one. Smile [:)]

The kit itself seems nice too. How was it to build?

  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Saturday, January 21, 2006 5:34 PM
Yeah it wasnt too bad, the canopies must be left off until your done painting unless your good at masking, the kit is about as simple  as you can get without being snap tite.
  • Member since
    January 2003
  • From: The Hoosier State
Posted by plasticmod992 on Saturday, January 21, 2006 5:52 PM
Looks cool, good job on the build!  I'm an aircraft guy, but I sneek over here every once in a while to marvel at the really neat stuff!  Now where did I put that Episode III CD.......
Greg Williams Owner/ Manager Modern Hobbies LLC Indianapolis, IN. IPMS #44084
  • Member since
    October 2004
  • From: Northern Indiana
Posted by overkillphil on Sunday, January 22, 2006 1:34 PM

 stipp wrote:
A lot of these craft were used in atmospheric battles as well as in space too.

I know.  Just a weak attempt at humor on my part.

my favorite headache/current project: 1/48 Panda F-35 "I love the fact that dumb people don't know who they are. I hope I'm not one of them" -Scott Adams
  • Member since
    November 2003
  • From: Tennessee
Posted by MartianGundamModeler on Monday, January 23, 2006 9:42 AM
These kits FINALLY just showed up at my Walmart last week! I gotta get one! So tell us what all is in the box, gimme some comments. I may pick on up today. I just dug out my old MPC Millinium Falcon yesturday so i hope to start back on that on with my new skills that I have learned after taking a ten break on it!LOL 
"Some men look at things the way they are and ask ' Why?'. I dream of things that never were and ask "Why not?".--Robert Kennedy taken from George Bernard Shaw's "Back To Methuselah" (Thanks to TomZ2) http://martiangundammodels.50megs.com/index.html
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Monday, January 23, 2006 5:06 PM
Well lets see, the kit is comprised of the hull halves and the clear canopies are in plastic and there are 3 different head rests because obi-wans is different than Anakins and 3 different solar wings, because they are different too, it went together well and all the panel lines are deep and are easy to enhance with a wash, the cockpit is good it has a lot of detail and could use some extra wires and hoses. 
  • Member since
    November 2003
  • From: Tennessee
Posted by MartianGundamModeler on Tuesday, January 24, 2006 12:38 PM
Does this fighter represent the second fighter Obi-wan flew when he when and fought General Grievous? On Cult TV man site there are pics of a blue and green version. I like the grey. I'd like to do a black one to represent a sort of post Episode III version for Vader. I went to Walmart yesturday but they didn't have any so I am going to have to check one of the other local Walmarts. We have three! Again nice job!
"Some men look at things the way they are and ask ' Why?'. I dream of things that never were and ask "Why not?".--Robert Kennedy taken from George Bernard Shaw's "Back To Methuselah" (Thanks to TomZ2) http://martiangundammodels.50megs.com/index.html
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Tuesday, January 24, 2006 6:59 PM
Nah, I just wanted to use the same color scheme i used for my snowspeeder.
  • Member since
    April 2014
Posted by r13b20 on Saturday, February 4, 2006 1:39 PM
Very nice! What size is it when finnished? Again, way cool!
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Saturday, February 4, 2006 2:35 PM
The ETA 2 is about 1/24 scale.
  • Member since
    May 2005
  • From: Dublin Rep Of Ireland
Posted by terry35 on Saturday, February 4, 2006 3:07 PM

Nice job, well done I like the finish.

Regards,

Terry.

 

  • Member since
    November 2005
Posted by Anonymous on Saturday, February 4, 2006 8:30 PM
Does it also have the purple Mace Windu option as seen in the Clone Wars Cartoon series.  That is the one I would like to build.
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Saturday, February 4, 2006 8:46 PM
AS a matter of fact, i`m working on another one that has the purple markings on it!
  • Member since
    November 2005
Posted by Anonymous on Saturday, February 4, 2006 9:01 PM
Would love to see pics of that one.  I hope they sell these kits in Australia.  I had to get the Revell Obi Wan snap together one from Japan.
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.