SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

building the Cooper Consular ship

2068 views
22 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
building the Cooper Consular ship
Posted by stipp on Thursday, September 7, 2006 4:10 PM

Howdy folks! I`m going to post this build up of the Randy Cooper rebel blockade runner from episode 4, Mr. Cooper is very talented and has worked on quite a few movies.
JV has a similar thread on the RPF and i did not want to hijack his thread so i started my own on this forum, i hope you dont mind.
I waited approximatly 7 weeks for this ship to arrive and waited 29 yrs for someone to make one into a kit.
This kit has its faults and i will get into it soon enough, There are a plethora of parts to begin with, a lot of detail and greeblies, my kit came with the clear engine parts as a freebie i guess, which arent needed because I`m not going to light it, the scale should work up to be 1/216 ?
The bad about this one is that quite a few parts are so thin that i had to epoxie styrene sheet under it to add stregnth to it, there are bubbles and quite a few pin holes, and a lot of missing/broken fins that i will have to replace.
there is evidence of mold shifting and missing detail that just did not mold right, this thread is by NO means a representation of all of Randys work!
Randy has been casting this ship for quite a few MONTHS! and is bound to make a few mistakes! By far this kit is damn near perfect compared to some of the garage kits out there that just sends you a blob of resin and says this is what it is!
But anyhoo, i will be posting all progress on this and hope everyone will chime in with questions about it! this kit is well worth the money spent and when Randy gets ready with his next project, i will be first in line to buy it!!
http://img.photobucket.com/albums/v602/Stipp08/100_0135.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0140.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0142.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0143.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0144.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0145.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0147.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0149.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0150.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0151.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0152.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0153.jpg
Here are some progress pics for ya, I have finished the main turbo lasers and had to replace the barrel with some tubing and the tips of the barrels for the secondary guns too, and i replaced the pipes with tubing and solder where there wasnt any, and the escape pods are cleaned up and finished.
The other photo is of the main hull, and you can see there is a lot of sun light shining through, it was so thin my daughter put her finger through it, so I pushed it back and epoxied some sheet styrene to give it strength, like i said it was no problem to correct any of these and no skin off my back.
Tenderfoot



Joined: 03 Sep 2006
Posts: 14
Location: Waynesboro, Va/Chulak

  • Member since
    May 2004
  • From: Oregon
Posted by maxx1969 on Thursday, September 7, 2006 10:52 PM
Stipp...I hate you...no I really do...


Congrats on owning one of the greatest GK models of the year!!! I look forward to your build up.


ps I don't hate you StippBig Smile [:D]




~Matt T Meyer
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Friday, September 8, 2006 5:15 AM

Mwhuhhaaha! I know your just jealous! Tongue [:P]

I love this kit, it will build up nice, and like i said, Randy has been casting these at an alarming rate and the moulds are starting to wear out, and the problems i have only reflect MY kit yours might be perfect.

It is worth the money and wait, so get one nowSmile [:)]

  • Member since
    January 2006
  • From: Baton Rouge, Snake Central
Posted by PatlaborUnit1 on Monday, September 11, 2006 10:45 AM

I saw one of these kits at our last club meeting and it was in several LARGE ziplock bags. ABSO-FREAKIN-LUTELY gorgeous. I didnt get TOO close to the resin, but man it was quite a job casting it all up and making sure you have ALL the parts in the box before it goes out.

I cant wait to see the in-progress on this one!!

 

Build to please yourself, and don't worry about what others think! TI 4019 Jolly Roger Squadron, 501st Legion
  • Member since
    March 2004
  • From: Kincheloe Michigan
Posted by Mikeym_us on Monday, September 11, 2006 7:43 PM
must have set you back a hundred bucks for a ship that size so what next buy the Star Destroyer Avenger in the same scale so you can display the Blockade runner in the docking bay?

On the workbench: Dragon 1/350 scale Ticonderoga class USS BunkerHill 1/720 scale Italeri USS Harry S. Truman 1/72 scale Encore Yak-6

The 71st Tactical Fighter Squadron the only Squadron to get an Air to Air kill and an Air to Ground kill in the same week with only a F-15   http://photobucket.com/albums/v332/Mikeym_us/

  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Monday, September 11, 2006 8:01 PM

Hmmm, more like 375.00 but that is with shipping, it weighed in at 9lbs !

Not a star destroyer(thats Matts job) but the Radiant VII from episode 1 in the same 1/215 scale!!!

  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Tuesday, September 12, 2006 7:50 PM
Hey people! i here to give you all an update on the RBR,first off the radar is completed, i have checked all of the "fins' and came up one of them did not forn right so i must recast one of them, on the rear engine support that connects to the secondary hull, I replaced all of the fins on it because they all were broken off, also in the pics youll see one part of the primary hull has a few blobs and holes in it and in the other you see i had to put bondo in it to fill them, in the primary hull bottom piece, there as you can see is about a quarter inch of resin that I will have to grind and sand off, and now off to the pics!
http://img.photobucket.com/albums/v6...8/100_0170.jpg
http://img.photobucket.com/albums/v6...8/100_0171.jpg
http://img.photobucket.com/albums/v6...8/100_0169.jpg
http://img.photobucket.com/albums/v6...8/100_0168.jpg
http://img.photobucket.com/albums/v6...8/100_0166.jpg
http://img.photobucket.com/albums/v6...8/100_0172.jpg
  • Member since
    March 2004
  • From: Kincheloe Michigan
Posted by Mikeym_us on Tuesday, September 12, 2006 8:58 PM
well I guess you can't hang that from the ceiling and you would need a room of its own to hold it (dang thing is bigger than my Trumpeter Nimitz for crying out loud!)  and wasn't the Radiant VII about the same diameter as the Millenium Falcon but about the length of about 1 and 1/2 Millenium Falcons?

On the workbench: Dragon 1/350 scale Ticonderoga class USS BunkerHill 1/720 scale Italeri USS Harry S. Truman 1/72 scale Encore Yak-6

The 71st Tactical Fighter Squadron the only Squadron to get an Air to Air kill and an Air to Ground kill in the same week with only a F-15   http://photobucket.com/albums/v332/Mikeym_us/

  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Tuesday, September 12, 2006 9:15 PM
The radiant vii was kinda large like the RBR, and thats why Mr Cooper is doing it in about the same scale, the R7 had a large salon hull underneath the cockpit and a large crews quartes aft of the front fuselage, the episode 1 cutaway book shows it better.
  • Member since
    March 2004
  • From: Kincheloe Michigan
Posted by Mikeym_us on Tuesday, September 12, 2006 9:28 PM
so are you saying that the R7 that landed in the landing bay of the Trade Federation droid control ship in Episode 1 was the same size as the Corelian Corvette (or RBR) from Episode 4?

On the workbench: Dragon 1/350 scale Ticonderoga class USS BunkerHill 1/720 scale Italeri USS Harry S. Truman 1/72 scale Encore Yak-6

The 71st Tactical Fighter Squadron the only Squadron to get an Air to Air kill and an Air to Ground kill in the same week with only a F-15   http://photobucket.com/albums/v332/Mikeym_us/

  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Tuesday, September 12, 2006 9:49 PM
yep, sure am! It also could be slightly larger, now that one is the real consular ship!!
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Tuesday, October 3, 2006 10:04 PM
Update, I had some parts that werent any good so Randy sent me some replacements and they went to the wrong address and lo and behold the PO "lost" the package, so i`m still trying to get the box put prognosis doesnt look good y`all.Sad [:(]
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Sunday, October 22, 2006 7:51 AM
A quick update today, I have gotten the new parts from Randy and am putting together some major parts, here are some pics.
  • Member since
    March 2004
  • From: Kincheloe Michigan
Posted by Mikeym_us on Sunday, October 22, 2006 11:39 AM

On the workbench: Dragon 1/350 scale Ticonderoga class USS BunkerHill 1/720 scale Italeri USS Harry S. Truman 1/72 scale Encore Yak-6

The 71st Tactical Fighter Squadron the only Squadron to get an Air to Air kill and an Air to Ground kill in the same week with only a F-15   http://photobucket.com/albums/v332/Mikeym_us/

  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Sunday, October 22, 2006 7:50 PM
Thanks Mike but it doesnt make sense unless i got it turned off somewhere, I will try to post more pics later
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Tuesday, October 24, 2006 8:31 PM
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Thursday, October 26, 2006 8:35 PM
These are the latest pics with the engines and the fins attached, all thats left is, paint and weathering, it will be primered in gray and then painted in grime color, like a dirty white same as the Millenium Falcon. http://img.photobucket.com/albums/v602/Stipp08/100_0241.jpg http://img.photobucket.com/albums/v602/Stipp08/100_0240.jpg http://img.photobucket.com/albums/v602/Stipp08/100_0239.jpg http://img.photobucket.com/albums/v602/Stipp08/100_0238.jpg http://img.photobucket.com/albums/v602/Stipp08/100_0237.jpg http://img.photobucket.com/albums/v602/Stipp08/100_0236.jpg
  • Member since
    July 2005
Posted by Admiral Grasshopper1 on Thursday, October 26, 2006 11:30 PM
That looks excellent Stipp,Great Work!
  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Friday, October 27, 2006 3:20 PM

Thanks Admiral! I just dont know why my links just dont work, they worked before?

 

  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Wednesday, November 1, 2006 7:52 PM

Just a small update, no pics but... just to let you all know that I took a small break in working on the RBR.
My engine inserts finally came in and I was able to complete the assembly!!
I am thinking of applying some putty to the "fins" to fill in any gaps and to make the corners smoooooth.
if you have any questions just hollar

And here we are again! More updated pics of the Consular ship, more and more i am thinking of converting her to the episode6 variant, with the windows and the extra turbo lasers, now if anyone knows what these come from just let me know!! Now on to the pic

http://img.photobucket.com/albums/v602/Stipp08/100_0238.jpg

http://img.photobucket.com/albums/v602/Stipp08/100_0241.jpg

http://img.photobucket.com/albums/v602/Stipp08/100_0240.jpg

http://img.photobucket.com/albums/v602/Stipp08/100_0239.jpg

http://img.photobucket.com/albums/v602/Stipp08/100_0237.jpg

http://img.photobucket.com/albums/v602/Stipp08/100_0236.jpg

http://img.photobucket.com/albums/v602/Stipp08/100_0231.jpg

my links are working again, I dont know why? enjoy!

  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Sunday, November 19, 2006 7:35 PM

update people!

I used the grime and did a mixture of 1 oz of grime and 1/4 oz of white, and came up with this color, the plain white was too bright even after some weathering so I knew that straight grime was too dark, and yes you can see some of thered color and others showing through so I need to redo it, and one of he pics is of my FMMF that is painted with straight grime color BUT with gray primer, the RBR had white primer and then the grime white paint.
http://img.photobucket.com/albums/v602/Stipp08/100_0251.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0249.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0248.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0246.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0253.jpg
http://img.photobucket.com/albums/v602/Stipp08/100_0250.jpg

  • Member since
    March 2004
  • From: Chulak/Jaffa Cree!
Posted by stipp on Tuesday, November 21, 2006 7:21 PM
  • Member since
    November 2004
  • From: Fukuoka Japan / Brisbane AUS.
Posted by Chris_in_Japan on Wednesday, November 22, 2006 6:08 PM

All I can say is..

WOW...

Thats looking sweet there stipp!

Chris 

On the bench:

                          1/48 RAAF 3 Sqn F/A-18B

                          1/150 /1/160 N Scale Japanese Rail diorama.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.