SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Mechwarrior interest

5617 views
25 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Monday, September 18, 2006 9:24 PM
I don't know if you heard of this before but Fighting Pirannha will put out larger size decals for those larger size mechs.  All you have to do is ask them.  They don't give you as many but how many would you need at one time?  I had them make some of the wolverine, mongoose, and blood spirit decals and they as usual did a good job.

  • Member since
    August 2005
  • From: Glenolden, PA
Posted by highlanderburial on Monday, September 18, 2006 8:33 PM

 ZzZGuy wrote:
I really wish i had time to scratch build battletech/mechwarrior mechs, but alas there is only so much time. (to bad MW5 is cancled, and i want a mmorpg version of battletech)

Perhaps those of you who are going to be going ahead tell the rest of us how you are going to go about scratch building these modles? A little more trial, a little less error.

My eventual goal is to kitbash a Gundam for the major joints etc. I have this 1/100 kit I got off ebay for 9 bucks. I got two of them, I built one of them by the directions, and the other will become my favorite mech: The Highlander HGN-732 model. I am simply going to baffle the exsisting armore and rebuild the head, torso and replace the right arm with a gauss rifle. Great topic by the way!

Good luck with this. If you have any digital pics of a Highlander laying around please post it.

-Todd

Imagine a witty signature right .....here....

  • Member since
    September 2006
  • From: Newfoundland, Canada
Posted by ZzZGuy on Saturday, September 16, 2006 8:29 AM
I really wish i had time to scratch build battletech/mechwarrior mechs, but alas there is only so much time. (to bad MW5 is cancled, and i want a mmorpg version of battletech)

Perhaps those of you who are going to be going ahead tell the rest of us how you are going to go about scratch building these modles? A little more trial, a little less error.

Mongol General: Conan, What is best in life?
Conan: To crush your enemies, see them driven befor you, and hear the lamentations of the woman!

  • Member since
    November 2003
  • From: maine
Posted by ilikespagetti on Thursday, September 14, 2006 8:44 PM
children? what children?
I am a man, But I can change. If I have to....I guess...
  • Member since
    November 2005
Posted by Anonymous on Thursday, September 14, 2006 9:38 AM

Wow, spaghetti, you're frightening the children.

About the Mech 4 models, yeah um... I found that out the hard way. On to Mech 3....

  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Thursday, September 14, 2006 7:27 AM
Battletech "unseen" Battlemechs are based directly on Robotech so any of the Bandai/Imai destroid and veritech kits in 1:100/1:200 are perfect. Fighting Piranha Graphics do decals for almost all the Inner Sphere houses and merc regiments, plus all the Clans.

The other alternative for big scale models are by Armourcast, but at AU$250 a piece, they are expensive.

Horizon also did a 1:35 Timber Wolf (Madcat) but as that goes for around $400 on eBay....

Here is my 1st Federated Suns Armoured Cavalry MAD-3R Marauder c3028 (Bandai/Testors 1:200 Robotech Officers Pod).




"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
  • Member since
    November 2003
  • From: maine
Posted by ilikespagetti on Wednesday, September 13, 2006 6:09 PM
no cold showers for me. due to the fact that I went in the living room afterwards and a drew barrymore movie was one. Now that is a girl that can be REALLY hot in the right light...and that wasn't the right light...SO! all was good.
I am a man, But I can change. If I have to....I guess...
  • Member since
    September 2006
Posted by spiffitz on Wednesday, September 13, 2006 1:21 PM
 Quartermaster wrote:

I'm having a helluva time extracting the 3D models from Mech 4, I'm going to give Mech 3 a try later...



How are you going about with this? I thought the MW4 models were embedded in the .EXE file. So far I haven't found an extractor for them. The MechLab in the game is a pain as well because it doesn't let you just scroll through the mechs.
  • Member since
    November 2005
Posted by Anonymous on Tuesday, September 12, 2006 11:08 PM
yeah I had to take a cold shower myself LOL
  • Member since
    November 2003
  • From: maine
Posted by ilikespagetti on Tuesday, September 12, 2006 10:34 PM
But it will be so worth it. Tracysw those pics are damn sexy!
I am a man, But I can change. If I have to....I guess...
  • Member since
    November 2005
Posted by Anonymous on Tuesday, September 12, 2006 10:00 AM

I'd love a set of Madcat specs too!

I'm having a helluva time extracting the 3D models from Mech 4, I'm going to give Mech 3 a try later...

 

I figure if anything is gonna be hard to build, the Uziel will be, it's torso is all ovoids and the arms and legs are coke-bottle cylinders. Fun fun fun....

  • Member since
    November 2005
Posted by Anonymous on Tuesday, September 12, 2006 7:11 AM

Fantastic, Greatly appreciated!

Tracy

  • Member since
    January 2003
  • From: arizona
Posted by cthulhu77 on Tuesday, September 12, 2006 6:47 AM
I'll send it over as soon as I can find the bugger!
http://www.ewaldbros.com
  • Member since
    November 2005
Posted by Anonymous on Monday, September 11, 2006 10:03 PM

Cthulhu77 could a beg a copy of that file? Pretty please?????

Tracy

  • Member since
    January 2003
  • From: arizona
Posted by cthulhu77 on Monday, September 11, 2006 10:01 PM
I have 1/35th Timberwolf (madcat) schematics that were drawn up for me...but I took a look at the amount of scratching, and bailed...you are more than welcome to them!
http://www.ewaldbros.com
  • Member since
    November 2003
  • From: maine
Posted by ilikespagetti on Monday, September 11, 2006 9:49 PM
You ROCK! I dont know what it is about the Uziel, I think it's the fact that there's no mistaking it with any other mech.
I am a man, But I can change. If I have to....I guess...
  • Member since
    November 2005
Posted by Anonymous on Monday, September 11, 2006 5:24 PM
Just for you Spagetti, I will import the Uziel model and draw plans for it before I do any other mech :)
  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Monday, September 11, 2006 4:40 PM
On line I drive lights as much as possible so a Commando, Raven, or Packhunter would do.  If I need something a bit meaner I'd take a Marauder.

  • Member since
    November 2005
Posted by Anonymous on Monday, September 11, 2006 4:32 PM

I've played all thye Mechwarrior games up to 4 and was p-laying it to but life got in the way and i can't find my cd's now but that's another story. I hunted and pecked and scrounged all over looking for some drawings to make mechwarriors from and found a couple of  free paper kits from a guy in South Korea. The files are on my other computer right now but I've wanted to do some scratch built Mechs for a long time. I want to do a 1/35/32 scale Fafnir, Shadowhawk, Avatar and some of the others but alas no info out there good enough to start with. I'd personally love to get some of your plans. 1/35 scale could be a touch big but that or 1/32 would be the scale where you could get the most as far as accessories to go with them and kitbashing parts too. I'd sure like to see what you come up with, they'd be great. Also following the lead of some of the resin manufactures you could like umm rename them and possibly sell a few sets to pay yourself back for your time and effort, I've seen I don't know how many wolverine, batman and other assorted somic book characters renamed and sold to avoid licencing fees it looks like.

Tracy

 

  • Member since
    November 2003
  • From: maine
Posted by ilikespagetti on Monday, September 11, 2006 4:06 PM
will there be an Uziel?
I am a man, But I can change. If I have to....I guess...
  • Member since
    November 2005
Posted by Anonymous on Monday, September 11, 2006 2:59 PM

Well I'm pretty avid in 3D Studio MAX 6, so I'm going to start importing Mechwarrior game models from Mech 4 and Mech 2 if I can extract them, and I'll start printing up scale & reference sheets so that I and anyone else who wants to can begin scratchbuilding some nice mechs, since it seems the Dunces of the Coast don't want to utilize perhaps the most lucrative brand they own.

I'm thinking 1/35th scale would be the best to reference the models in, what do you guys think?

  • Member since
    November 2003
  • From: maine
Posted by ilikespagetti on Saturday, September 9, 2006 6:30 PM
I only wish there was a decent size uziel kit, that's the one I really love.I keep saying one of these days I'm going to take out my lost in space movie robot and bash him into one but I lack the time, maybe when I finish my Boba Fett armor.
I am a man, But I can change. If I have to....I guess...
  • Member since
    March 2004
  • From: Kincheloe Michigan
Posted by Mikeym_us on Friday, September 8, 2006 3:30 PM
WizKids holds the rights to BattleTech and MechWarrior. But True These companies should allow the major kit manufatures to tool kits of those impressive BattleMechs.

On the workbench: Dragon 1/350 scale Ticonderoga class USS BunkerHill 1/720 scale Italeri USS Harry S. Truman 1/72 scale Encore Yak-6

The 71st Tactical Fighter Squadron the only Squadron to get an Air to Air kill and an Air to Ground kill in the same week with only a F-15   http://photobucket.com/albums/v332/Mikeym_us/

  • Member since
    January 2003
  • From: arizona
Posted by cthulhu77 on Friday, September 8, 2006 10:18 AM

  There are kits available for Vulture, Madcat(Timberwolf), and the Atlas from different sources, but they are super expensive.  I built a Gunslinger using the chassis of an ATST as a base, and it turned out fairly well, but it was a lot of work.

  They (the holding companies) are making a huge mistake by not allowing Revell/Monogram to make models of these battlemechs...I am not sure where FASA/Mattel is coming from with their decision to not market the mechs...seems silly to me!

http://www.ewaldbros.com
  • Member since
    November 2005
Mechwarrior interest
Posted by Anonymous on Friday, September 8, 2006 9:47 AM

I know some of you doubtless play the boardgame and paint up the little board pieces... BUT... have any of you played the Mech games for PC or XBox?

I haven't found any Mechwarrior kits, so I was considering scratchbuilding a mech based of computer game scale & dimensions.

I'm curious if anyone here has ever tried this before, or if there would be interest in tooling any Mech kits in a decent armor scale like 1/35? 1/24 would probably be a tad large for 50-100 ton mechs I'm guessing...

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.