SMS Emden color questions

ogrejohn wrote:

That guy made a very impressive build Jake! Hope I can do half as good on mine. That build does kind of confuse me more now. The fore and aft deck color on his shows a kind of black color. Maybe I just need to take a best guess!

 the fore and aft decks are linoleum, not wood. the only wood decks are the lower mid deck and the for semi-circular platfoems around the upper 4.1" guns. i have 2 of these, a GMM pe set and a vectorcut laser-cut wood deck. i am at the point, when i get back to her, to cut the backs off the six 4.1" upper guns and adding plastic cylinders to represent the breechs. also have eight WEM 5"/51 in 1/350 for arizona. i may use those and build gun shields if they are close to the correct size.

Thanks Jake! I'll be sure to look for that.

On your original question on the yellow color I found that Floquil has Spanish Yellow which is very close to the oxyidized yellow you might be looking for?  Take a look see.

Jake

That guy made a very impressive build Jake! Hope I can do half as good on mine. That build does kind of confuse me more now. The fore and aft deck color on his shows a kind of black color. Maybe I just need to take a best guess!

This model was listed at the Model Warships Gallery  Enjoy, This guy does serious work, which also proves he's like us and has no life.

http://www.modelshipgallery.com/gallery/cl/sms/emden-350-pvb/pvb-index.html

 

Hey guys, thanks! This should help a lot!

Yes,

Superstructures: Sand Yellow,RAL 1002  W.E.M Colourcoats ARB 01

Hull: Pure White RAL9010  W.E.M Colourcoats C 03

Boot Topping: RAL 7015   W.E.M Colourcoats KM 06

Underwater Hull: RAL 3011  W.E.M Colourcoats US 14

Deck/Linoleum: Red Brown RAL 8012  Colourcoats ACSM 11

 

Source John Snyder    White-Ensign-Models

check the whiteensignmodels web site for ordering info,they are nice people to deal with

As I recall, most of the decks on this model are representing wood (look for the molded-in planking) and these should be painted in something approaching wood.  Everything else should be painted the same as your upper hull color (Imperial German light gray).  A good trick is to paint it first with tan, or sand, any sort of very light tan, and then after it dries, takes some very dark brown, or even flat black, thin it down a lot, and then using a fairly large brush, paint this 'wash' over the decks.  It will sink into all the planking 'seams' and make it look a lot more realistic.  As for the stacks and upperworks, if you want to do the ship 'pre-war' then these should be a buff-yellow.  Once the war started, these were all painted over in standard Imperial German light gray.....