SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Monogram 1/120 Constitution= Imai

6226 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2002
Monogram 1/120 Constitution= Imai
Posted by lenroberto on Thursday, September 24, 2009 8:57 AM
Scored on ebay for...$20.00!! 1979 Monogram USS Constitution- 29 inches long, 22 inches tall-

I had no idea of the origin but to my joy- it said on box top from Imai molds. Sealed in box. It looks very impressive and crisply molded.

I had no idea Imai did a Connie in this size nor that Monogram reboxed it back then.

$20 was a heck of a bargain.

I will take some pics this weekend if anyone wants to see contents...

My only concern is- what can I do for blocks in this size?

thanks

Len
  • Member since
    May 2003
  • From: Greenville, NC
Posted by jtilley on Thursday, September 24, 2009 10:01 AM

That is indeed quite a find - and at an incredible price.  I don't remember, but I suspect the price of the kit when it was new was considerably higher than that.

Dr. Graham's history of Monogram doesn't say much about the company's brief time as a U.S. distributor of Imai ship kits.  He does mention that the Imai molds were actually shipped to the U.S. - and that they were made of such soft steel that they got damaged and had to be repaired before they were sent back to Japan.  (I wonder if that's a hint about why Imai went out of business.)

Any sailing ship kit from Imai is worth building.  I've wondered, though, about one feature of this kit in particular.  I've never seen the inside of the box, but in photos it looks as though the big hatch in the middle of the spar deck is molded as a solid, smooth piece of styrene (like the old 1956 Revell kit).  True?  I hope not - though "opening" the hatch and building a section of the gundeck to be seen through it wouldn't be insurmountably difficult. 

Youth, talent, hard work, and enthusiasm are no match for old age and treachery.

  • Member since
    December 2002
Posted by lenroberto on Thursday, September 24, 2009 10:13 AM
There is only the top deck - I looked for another myself.

Another neat feature- the cannon muzzles were molded open- no drilling out required- amazing.

I think the lower deck calls for the old Airfix method of mounting the cannon from the outside. Doors are supplied.

I will take some photos tonight perhaps after work and check the hatch you mentioned.

-Len
  • Member since
    December 2002
Posted by lenroberto on Friday, September 25, 2009 7:27 AM
here are pics of the kit contents:


Hull detail:
]



Cannon barrels:







Deck:


-Len
  • Member since
    February 2003
  • From: Lacombe, LA.
Posted by Big Jake on Friday, September 25, 2009 9:24 AM

Also if you look you will see severals gangway carvings that represent the entry port on the spar deck an Eagle tangled with an anchor.  Very well done.  I ended up with TWO of the kits last month and I'm looking to sell one, any body want/need one?  You get it for the same price I paid.   I send pics.

 Jake

 

 

  • Member since
    May 2003
  • From: Greenville, NC
Posted by jtilley on Friday, September 25, 2009 1:40 PM

Looks to me like a nice kit - and, by the way, a most impressive job of photography.

Apparently Imai was trying to represent the ship as she appeared at the time the kit was designed (the mid- or late seventies, I think).  It has the raised bulwarks, the three windows in the transom, and various other features of that period.

Apparently the big hatch in the middle of the spardeck is covered up with gratings - which appear to be very nicely molded.  The hatch on the ship herself is often covered like that nowadays.  Whether it was during her active career or not I don't know; it's certainly possible.

The photos show a number of other features that remind me of what ingenious people the Imai designers were.  I'm not a big fan of "dummy guns" (i.e., disemodied muzzles sticking out of gunports, with now breeches or carriages), but Imai's "dummies" certainly look more believable than Airfix's (or, for that matter, the fittings in the typical HECEPOB kit, which sells for hundreds of dollars).  [LATER EDIT:  I'm now looking at that picture on my home computer monitor, rather than the one at the office.  I think I misinterpreted what I was looking at earlier.  It looks like the gun barrels may be full-length versions, sitting on simplified, integrally-cast "carriages."  That looks like a great idea.  But with no gundeck - what are they supposed to sit on?]  The "wood grain" detailing looks like it may be just a bit overboard, but lighting can be deceptive about things like that.  The "copper sheathing" looks excellent.  And the plastic "shrouds and ratlines" look...well, better than most manufacturers' attempts at representing such things.  At least the shrouds appear to be heavier than the ratlines, and the ratlines "sag" between the shrouds.

I think this kit could be turned into a superb model.  

Youth, talent, hard work, and enthusiasm are no match for old age and treachery.

  • Member since
    December 2002
Posted by lenroberto on Friday, September 25, 2009 2:18 PM
I think this kit could be turned into a superb model.

I will do my best!

thanks for your comments...

-Len
  • Member since
    September 2005
  • From: Groton, CT
Posted by warshipguy on Saturday, September 26, 2009 12:24 PM

Jake,

I would be interested. How much are you asking?

Bill Morrison

  • Member since
    February 2003
  • From: Lacombe, LA.
Posted by Big Jake on Sunday, September 27, 2009 4:14 PM
I sent a PM but if you don't get it  jbgroby@charter.net  is my email.

 

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.