SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

New Thread - Wanna build a Four Piper ?

1857 views
11 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2014
  • From: New Braunfels , Texas
New Thread - Wanna build a Four Piper ?
Posted by Tanker - Builder on Thursday, June 22, 2017 10:10 AM

Hmmm ;

 After reading the book that outlines the loss of the U.S.S. Edsall D.D.219 . I think I want to build a Four Piper . Now , let's see what's available .There's the old REVELL offering of the " Cambelltown " and all her iterations .There is some 1/700 offerings and some 1/350 ships , too !  Oh ! the confusion . Which size is most easily Built ?

    Then there's the Card model genre too . Oh , Decisions , Decisions ! ! !  I have one done is 1/350 , I don't remember which ship , but She's one of the ones I made the mistake of painting various shades of Flat Sea Blue . Shoot , it disappeared !

       No , Not really . It just looked so small in that color and the detail in it including the Helm and Binnacle on the open sided bridge ,  could hardly be seen even with a magnifier ! Never again ! Sea Blue is reserved for larger scale ships !

    Fact is , I will build more of these little Greyhounds of the sea . There were many mods made to some and that deserves mention and presence in my little fleet . They look so Businesslike and at the same time so Sleek . That always caught my attention .

 Well off to the stash to see which ones I still have unbuilt !  T.B.

  • Member since
    September 2005
  • From: Groton, CT
Posted by warshipguy on Thursday, June 22, 2017 10:39 AM

Mirage of Poland has several different iterations of these ships in 1/400 that are quite good.  They include USS Ward, USS Noa, HMS St. Albans, HMS Campbelltown, and the former USS Stewart in Japanese configuration after her capture.  Each represents different versions, Campbelltown, for example, being modelled in her correct appearance during the raid on St. Nazaire.  I believe that there are several others in this collection but am not 100% sure.

Bill Morrison

  • Member since
    April 2005
Posted by ddp59 on Thursday, June 22, 2017 4:27 PM

also airfix did 1/600 version of the 4 stackers as i have a few.

  • Member since
    March 2003
  • From: Towson MD
Posted by gregbale on Thursday, June 22, 2017 4:45 PM

I've built a clutch of the Mirage kits and really love them. They're a bit fiddly---with lots of tiny pieces to clean up---but they're really nicely detailed, including properly cambered decks!

The old Revell war-horse is still a sentimental favorite. Nice big easy-to-work-with 1/240 scale, fair detail for its vintage. With a little love...like replacing or up-detailing guns...it can be a real dazzler.

Nice p-e sets available for both of the above. And Al Ross's Anatomy of the Ship entry on the Campbeltown is a must-have resource.

Greg

George Lewis:

"Every time you correct me on my grammar I love you a little fewer."
 
  • Member since
    September 2005
  • From: Groton, CT
Posted by warshipguy on Thursday, June 22, 2017 5:21 PM

I like the Revell kit as well. Granted, there are problems, such as the guns, and the deck is wood planked (unlike the real ship).  I also have the St. Albans by Airfix which is quite nice.  These ships are fun to build!

Bill

  • Member since
    September 2012
Posted by GMorrison on Thursday, June 22, 2017 5:35 PM

Cries out for Trumpeter or ROG 1/144

 Modeling is an excuse to buy books.

 

  • Member since
    September 2012
Posted by GMorrison on Thursday, June 22, 2017 9:40 PM

There's a great thread on Ship Model Forum, and Al Ross's book getts high praise there too.

 Modeling is an excuse to buy books.

 

  • Member since
    November 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Friday, June 23, 2017 8:45 AM

gregbale

I've built a clutch of the Mirage kits and really love them. They're a bit fiddly---with lots of tiny pieces to clean up---but they're really nicely detailed, including properly cambered decks!

The old Revell war-horse is still a sentimental favorite. Nice big easy-to-work-with 1/240 scale, fair detail for its vintage. With a little love...like replacing or up-detailing guns...it can be a real dazzler.

Nice p-e sets available for both of the above. And Al Ross's Anatomy of the Ship entry on the Campbeltown is a must-have resource.

 

I've built a couple of Mirage destroyers, and echo Greg's comments. I like the fact that they offer older and smaller vessels.

 

Don Stauffer in Minnesota

  • Member since
    March 2006
  • From: Bangor, Maine
Posted by alross2 on Friday, June 23, 2017 9:33 AM

BlueJacket Shipcrafters offers a 1/96 kit of BARRY (DD 248).

Al Ross

  • Member since
    June 2014
  • From: New Braunfels , Texas
Posted by Tanker - Builder on Friday, June 23, 2017 12:37 PM

Hi Al !

     I like the model . But In looking at it , it seems the stern quarters are , or look to be wider than they should be . Or are the pictures decieving me . T.B.

  • Member since
    June 2007
Posted by jrb53 on Friday, June 23, 2017 4:55 PM

Hope you find a good scale to work with.  I've been wanting to build one of these 4-pipers ever since I read "South to Java" by William Mack.  He participated in the early WW2 naval battles and his novel does a great job bringing to life the invasion of the Phillipines and the Battle of Java Sea.  Would make a great companion read while building the kit. Smile

Jack

  • Member since
    September 2005
  • From: Groton, CT
Posted by warshipguy on Saturday, June 24, 2017 1:36 PM

I found one other Mirage kit in my stash . . . HMS Montgomery.  In short, there are quite a few kits of these ships available. Al, the Bluejacket kit is very impressive!

Bill

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.