Constitution disaster

We're approaching out 50th anniversary. 

I have one advantage, at almost 80, my hearing is kaput, so I have some hearind aids. While these have the advantage of inproving your hearing, they have one feature no counselor can match...an "on" and "off" switch.

When I first got them, one day, wifey was mad about one thing or another, and was yelling, as wives are wont to do, that's when I discovered the "on"/"off" switch. The reaction was beautiful to behold..."did you turn those off on me!? Don't you ever turn those off on me!" Imagine this being said at a rather high volume! 

When I am in the cellar modeling, I turn them off too!

Incidentally, my wife is Italian and I'm Irish. It has been an interesting union!

crackers

Rick, have you considered a marrage councelor ?

Happy modeling     Crackers

 

 That won't work.  Marriage councelors use vacuums too.

    Nino

Rick, have you considered a marrage councelor ?

Happy modeling     Crackers

I saw your rebuild of the lobster boat! It was a great rebuild. Not putting your build on the bar is a good idea. It only takes a Guiness or two to make some folks clumsy!

I threw the wifey out of my build area after putting the lock on the door so she can't steal the things I loot from her sewing kit back. The gals have a lot of useful things to use in those sewing kits!

The main reason she is locked out is that vacuum cleaner she insists on using down there gobbles up dropped parts!

HMS Alert by Shipyard. This is a new experience, though I did make buildings for my n-scale rr out of cereal box cardboard. I got the entire kit, 1/72 scale. The model will be about 26 inches lengthwise.

Shipyard has some interesting kits, they are in Poland, but in the US, Ages of Sails sells their products.

They also have a 1/96 M\HMS kit but I figure that tha larger scale will be easier to work.

Do you do paper ship models?

Oh! I have to know, Which Paper Model did you order?

The hull is together, gun deck in place. I have the gun ports closed to eliminate the gun placement problem with the ratlines. I will leave three or four guns run out.  (for practice with a new crew.)

The guns will be placed on the gun deck only where they would show from the weather deck. (Since the gun ports will be closed) This will save a lot of rigging work on the guns too.

There was a problem in fitting the gun deck to the hull at the stern, one side being too far forward. I fixed (?) this by using thin stryrene strips as spacers, pushing the forward section back. An unexpected plus to doing that was that the transon fits much better.

I have ordered some thin planking for the decks, but will plank the gun deck only where it will show. The weather deck will be planked. The planking will be of oak.

At the moment, the gun deck is in, waiting for the thin planking to arrive, gun ports are in and gun stripe painted The transom was fitted but has to wait for the spar deck to go in before glueing to the hull. It fits much better with the gun deck adjustment.

I glued the rudder so it can not turn. I could never figure why Revell made a moveable rudder, so folks would be tempted to play with it, creating some risk.

The hull is together, the gun deck has a fit problem at the stern. All three hulss I had had the same problem.

I would love to see a 1/60 scale Connie!

Hear that! I do as much rigging off ship as possible. There is also less chance of knocking the build over or breaking something.

I ordered a paper model too. Never knew they existed. Just to try one out.

I also used wire for the footropes and stirrups.  I did all my rigging of the yard while off the ship.  No need to go through all that hassle on the ship.  Much easier to add all the blocks, footropes, etc. when you just clamp it in the vice (via a clothespin).  Lots more room to work, and you don't have to worry about any other ropes in the way.

Bob

You Know, Besides Furry Family;

    I wonder what it is with Daughters and Models?They either ignore them completely or they do the opposite and get so enthused about what Dad or Grandpa is doing they have to break all the rules to show it to friends. Also curious little girls.

 When I told my Son, Don't touch he would actually even sit in a chair in the shop with his hands pocketed. The girls now, "Oh, what's this?" while getting their hair in the rigging.

 Ah well, Gotta love them.

Did You say Cats?

  Funny that. My cat-an all Black Siamese and something Other( More Siamese than other). Sits for hours watching me work on the paper models. Occassionally cleaning a forepaw full of claws.

 She only gets P.Od when I do plastic. Then she will screw around on the bench. I don't know what it is with her and plastic!

  If I let her sniff the Box she will curl up in it if she can.Takes about ten minutes of sniffing.( she's fourteen now and I guess her sniffer doesn't work as good.) She has never interrfered with a build of paper in any way. Plastic -she likes to bat the parts around as I build them. She gets giddy when it's say a model Car or Plane engine. Guess she likes the way they spin when she bats them. 

 I decieved her on that. There is an old Diesel truck engine that I keep in a Shot Glass on the bench.When she gets too curious, out it comes. She'll play with it, then plop on top of it and go to sleep.

I'm using wire for the foot ropes. I saved some of the spars, so that will lessen the load on the new build. Will the standing rigging obstruct rigging in the foot ropes?

I know where your coming from bob , I once had my sister-in-law , get her hair coaght in the rigging of my 1/100 victory  , she couldn't work out why i yelled at her not to move,

I have a beautiful spot in the basement all picked out, which is big enough for the ship and the case I will have to build for it, lest it get covered in dog fur! 

I could also put it on the end of the bar, but I detest that idea because of people who, for some reason, insist on touching things.  I have an old Maine lobster boat on the bar now that I rebuilt for a friend who dropped it just before all this Covid non-sense started, so I have not been able to give it back to him (did send him tons of photos).  But that is a simple build compared to this.

Still debating on whether I will put the footropes now (as I rig the shrouds) or at the end (after all the other standing rigging is done).

Keep up the good work.

Bob

It's good to see the wifey on board. My wife seems to think I'm crazy for starting a new build but is ok as long as it stays in the model shop area of the cellar. (I spill too much coffee!)

Your build is awesome! I hope this one comes out half as good as yours.

Where do you plan on displaying it?

Rick Sr

Oh...there is also a lock on the door to my work room.

Smart move adding a lock.  The only small creatures I have to worry about are my 2 golden retrievers, who often sleep under the bench (or more accurately, ON my foot) while I am working.  they seem relatively disinterested in what I am doing, except for the ocassional hop up onto my lap.  Now that I am rigging, that has become somewhat problematic, as the flying jib often extends off the table by quite a bit.  I put pieces of brightly colored tape on the end of the flying jib and spritsail yard so I didn't poke my eye out, but the dogs don't seem to know that.

The biggest issue is their hair.  It's everywhere.  I need to vacumn my workroom at least twice a week to keep it clean.  There and under my computer desk, where they also like to sleep on my feet.

As I said at the beginning of my blog, I lost my first Constitution due to a "mishap" while it was in storage because my wife didn't want it in the house.  The current version is light years ahead my original, and my wife is truly interested this time at the craftmanship and time it takes to create something like this.  Glad she is on board this time.

Bob

I see these types of disasters are more frequent than supposed. The main culprits seem to be girls, as in daughters or grand daughters,wives and cats! Thanks for the encouragements

I have pics in my computer in file folders. To transfer to FSM, what files(?) do you post them to?

The main area of misfit on the gun deck seems to be in the transom area, with port side too far forward, interferring with the galley windows and preventing an even fit. I plan on using strip styrene to correct this. It seems to have been a common problem. This willl leave a small gap where the stern and midsections meet. (Putty covers a multitude of sins) I did not address this on my other build.

The gun deck also has small gaps at the bow but that seems noncosequential.

The fit near the figure head was also off slightly, again a common problem, and the sanding and clamping solved that very well.

I am still filling in the hinge dimples for the gun port covers with putty, not intending to use the gun ports covers.

Oh...there is also a lock on the door to my work room.

I had an episode of something similar in '94. I was working on the Revell Arizona and was probably 75-80% done. I had left it out to let the paint finish drying overnight and 2 of my girls, who were 3 and 5, woke up really early, saw the model and decided to "help" Daddy finish painting it {I was already done, lol}. The thing suffered a bunch of breaks, cracks and a miriad of new colors added. Total loss.     It was hard keeping a straight face watching them deny it ...... with the evidence of multiple colors of paint all over their hands, arms and face, lol.   Not really too much to do at that point. I knew they didn't mean to hurt it and just wanted to help. Would've just mad it worse to really punish them too much. 

Anopther ship model suffered a similar fate.  In the remake of the Battlestar Galactica series, Cammander Adama learns that Starbuck was killed on a mission.  He's working (supposedly) on a wooden model of the Victory.  In a fit of acting grief he gets carried away and throws it against a bulkhead, destroying the kit completely.  As it turns out, the model was on loan for the episode.  Can you inagine being the one who built it?

I remember seeing a article long ago when I was in high school about a guy who hand made a large model of the Constitution.  It was an amazing piece of work to see.  He went so far as to hand turn the cannons, make stacks of individual cannon balls, iron grates, all the blocks teh wooden hand stakes the lines were tied to and so on.  After he got it all finished he decide to take it somewhere to be put on display for a while.  Slight problem, it was too big to get it out of teh basement as it was and all the yardarms and rigging had to be taken down to get it out.\

It's moments like these...

Rick Sr. Ah ! You got this. I have faith in you.

I have the hull together, having learned from the other, this hull has gone together better. I have been filling in the hinge dimples where the Revell has the gun port hinges with putty. There are a lot of hinge dimples and it takes some time to do.

I have all of the guns and carriages from the wrecked build, so that will speed things up.

On this build, I held the hull parts up to a light, with clamps holding the parts together and marked all the areas where light showed through with white pencil, then sanded the hull halves at those spots. When no light was showing, I glued and clamped the hull together. It went together much better.

I work on it at a slow pace as two of the boys have moved back in, having lost their jobs, and we are finishing off the basement as an apartment for them. Just put in the bathroom, so working on this build as catch can.

Hope you all had a Happy and Holy Christmas, and wish you all happy modeling and a Happy Nwe Year!

Test fitting shows the Revell decks are still misaligned and will need some work for a proper fit.

The hull was broken completely through,both decks are broken too. It was crushed.  The section of the hull where it is joined at the keel is intact about two inches up. Maybe a cradle with the lower hull completed and the oak framing  sticking up might be a good diorama.

Already started the last hull.

The research I have done tells me that the only time the gun ports were used were in heavy seas, so I will not use the gun ports on this build. Just need a good putty to fill in the hinge spots on the hull.

Rick Sr

That might be a good idea...a diorama in Boston, with the hull under construction, maybe. I saved the Brody stove, all the guns and carriages, and the water and grog barrels.

 

https://ussconstitutionmuseum.org/2015/05/07/maintaining-and-restoring-an-icon-update/

That might be a good idea...a diorama in Boston, with the hull under construction, maybe. I saved the Brody stove, all the guns and carriages, and the water and grog barrels.

Thanks. Dad was a Navy man, signed up in 1917, got out in 1947 after WWII. Boy could he cuss! I think I repeated a lot of what he used to say when the Connie was broken.

I thought your knowledge was pretty impressive.

Thanks for the update, I sit corrected.  Being Air Force, Navy history took a back seat most of the time so some of my remembered facts were bound to be off a bit.  But at least I am building ships more these days.

Names:

Constitution

Constellation

Chesapeake 

Congress

President

United States

Yards:

Boston

Baltimore

Gosport (now Norfolk VA)

Portsmouth NH

New York

Phillie