SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Source information help

1643 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2003
  • From: The flat lands of the Southeast
Posted by styrene on Thursday, May 22, 2003 11:27 AM
Kurt,
You're a lifesaver (of sorts). I was aware of smallparts.com, but couldn't remember where I had seen them on the 'Net. I already have the GMM detail set for the Missouri (soon to be Misery). I'll check them out for the extra hatches I need, etc. Thanks a lot! (Thanks to Ed and Umi also for their fine suggestions. I've already tried K&S and will be looking into Plastruct.)
Gip Winecoff

1882: "God is dead"--F. Nietzsche

1900: "Nietzsche is dead"--God

  • Member since
    February 2003
  • From: Grass Valley, CA
Posted by seaphoto on Wednesday, May 21, 2003 6:41 PM
There are many excellent photo etch suppliers - I like Gold Medal Models, and their customer service is truly outstanding.

http://goldmm.com/

For the hypodermic tubing, try Small Parts Inc.

http://www.smallparts.com/

They sell tubing with an internal diameter as little as .003 of an inch, or a bit smaller than an average human hair.

Hope this helps

Kurt

Kurt Greiner

Interested in large scale, radio control warships? http://www.warshipmodelsunderway.com

  • Member since
    April 2003
  • From: PDX, OR
Posted by Umi_Ryuzuki on Friday, May 16, 2003 12:55 PM
Plastruct makes very fine styrene rod.
Down to 0.010 in diameter.
http://www.plastruct.com/ , if your hobby shop doesn't carry any.
The styrene rods would work very well for piping, and if you were to cut a length and sand and drill out the end slightly, they could be used for gun barrels.

Post some pic of your progress!
We would like to see the insanity!Big Smile [:D]
Nyow / =^o^= Other Models and Miniatures http://mysite.verizon.net/res1tf1s/
  • Member since
    November 2005
Posted by Anonymous on Friday, May 16, 2003 9:15 AM
Hi Gip - -

I've gotten some very small diameter brass tubing from the local hobby shop ... brand name K&S (?). I've also seen hypodermic-type needles for applying super glue. You could ask at your local hobby shop.

Gold Medal Models and White Ensign Models both produce quality photoetched parts. GMM produces sets for speceific ships as well as 'generic' sets of ladders, hatches, etc. I think they both advertise in FSM.

Good Luck - -
Ed.
  • Member since
    May 2003
  • From: The flat lands of the Southeast
Source information help
Posted by styrene on Friday, May 16, 2003 8:12 AM
Please help. I'm looking for:
1. A source for small (itty-bitty--how's that for accurate?) tubing. This could be brass, steel, aluminum, copper, monel, etc. This will be used for gun barrels (40mm and possibly 20mm) in 1/350 scale, as well as piping, etc. What I'm looking for is on the order of hypodermic needle tubing, the size of which corresponds to an insulin or tuberculin skin test needle or smaller (am I confusing anyone yet?)
2. A source for extra hatches, straight ladders, etc. in 1/350 scale. I know PE sets exist, I just don't know who to go to.
3. 1/350 anchor chain. What size is appropriate (how many links per inch, or is that important?)?

I'm WAY in over my head on a 1/350 Tamiya USS Missouri, but am having fun anyway. Cool [8D] Thanks in advance for all the help.

All the best,
Gip Winecoff

1882: "God is dead"--F. Nietzsche

1900: "Nietzsche is dead"--God

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.