What's the word on the 1/32 Lindberg PT-109?

Hippy-Ed wrote:

Thanks Al, I just looked and they have 3 bladed props but, are they right or left handed? The pic doesn't look right for the PT but, then again, it's for display http://www.bluejacketinc.com/fittings/fittings9.htm

According to the specs manuals and drawings, 80' boats used three RH props.

Al

Thanks Al, I just looked and they have 3 bladed props but, are they right or left handed? The pic doesn't look right for the PT but, then again, it's for display

http://www.bluejacketinc.com/fittings/fittings9.htm 

Hippy-Ed wrote:

ok, I finally noticed the props are 2 bladed on this thing... Are there any Am  3 bladed props out there in 1/32? I've checked the usual suspects. Anyone make  these anymore??

If you want display props (not for actual running), try www.bluejacketinc.com.  The props on this model should be 7/8" diameter (28" on the real boat) and I think they have some 3 bladers that size.  I'll look Monday (if I remember... :-} ) and see if the blades are the right shape.

Al Ross 

glweeks wrote:

Head over to the 1/35 armor stuff/  All the aftermarket gear in the world.  1/32 aircraft might furnish insturments etc.                 G.L.

Thanks. I've been to HR Products & they have some stuff for the PT Boat but, I'll be looking into the 1/35 stuff as well. 

 Head over to the 1/35 armor stuff/  All the aftermarket gear in the world.  1/32 aircraft might furnish insturments etc.

                G.L.

Alrighty, The kit came in this evening!! kit# 70813 motorized versin but, I wont be doing the R/C on this one.

http://i4.ebayimg.com/01/i/05/1a/6e/ab_12.JPG 

I am impressed with the size & right off I see that the gun tubs & the engine room hatch are wrong. The bridge is also not right, nor the instrument panels. Looks like a late war Elco.

Oh geez... what am I getting myself into?! Now where can I find some 1/32 diorama stuff /accessories?

qmiester wrote:

Eddie Finally found it - March/April 1984 issue.  article is titled "Building an accurate PT-109" by Gifford Hamilton and starts on p. 22

Thanks for that info. I'll see if I can't get a copy of that Issue. Any chance you can scan

the article & Email it to me?

I'm gonna go check out the back issue section & see about it.

Thanks 

EDIT** Just checked the back order... can only go back to Jan 1986

Eddie

Finally found it - March/April 1984 issue.  article is titled "Building an accurate PT-109" by Gifford Hamilton and starts on p. 22

grandadjohn wrote:

Check out HR Products under ship fittings, they make a lot of stuff for that kit. If you wish to RC it, Lindberg did make a motor set (don't know if it's still available) for it and you need a two-channel radio. Not hard to do, if you wish.

I've been all over the HR Prod. site and checked out the weapons too. Got some 5o cals & a 20mm

are there any places to find "furnishings" for it? Lockers, stove, etc?

Thanks, Please let me know.

Man, what a way to remember something

Eddie,

Not sure but think it was a late 80s issue - will try to dig thru my stack of FSMs tonite - reason I remember the issue is that one of our dogs got a hold of it and I came real close to throwing it away

qmiester wrote:

If you look back thru FSMs back issue listings, in one of the very early issues, there is an article on accurizing the Lindberg PT-109 complete with scale drawings and patterns.

Would you know which Issue that is in? I have looked thru most of my 2 years worth & haven't seen it yet.

Tia,

Eddie 

If you look back thru FSMs back issue listings, in one of the very early issues, there is an article on accurizing the Lindberg PT-109 complete with scale drawings and patterns.

From the pics I've seen of completed builds, it looks  like the late war 80' Elco with the big "vent" above the  engine room & such. Will compare it with my reference books when I get home later this afternoon.

I know, I'll need to get a set of plans before I start work on this project... 

I'll zip over & take a looksey at what they got for it. R/C is out as I don't have the patience for working with electronic "gizmos" & "doodads"

I've been trying to find a review for this kit and not having much luck. I have 70 pages left to search in ships for something on this kit.

Edit**       I thought I had seen something on this 

/forums/573194/ShowPost.aspx

rcboater wrote:

The word is "avoid" !!!!

Alright, Spill the beans!!

Thanks Al, Sounds like I'll have a time with it. That's what I am thinking of doing is some scratchbuilding so, this ought to be a good project.

I'll check your site for plans.

Eddie 

It's approximately the same vintage as the 1/72 Revell kit and is essentially a scaled-up version of their 1/64 scale kit.  If you compare it against photos and factory plans, you'll find that the hull shape is wrong, the cabins are wrong, the torpedo tube mounts are wrong, etc.  In other words, if you want to produce even a relatively accurate representation of an 80' ELCO PT, you will need to reshape/replace a lot of parts and do a lot of scratch-building.

Al Ross