SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Pyro/Lindberg Skipjack Oyster Boat Q

12435 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2006
Posted by jwintjes on Tuesday, January 23, 2007 2:23 PM

Thank you both for the information, which is highly useful indeed. Right now I really have to restrain myself from plunging straight into it; apart from the raised planking it is really a nice kit.

Jorit 

  • Member since
    August 2005
  • From: vernon hills illinois
Posted by sumpter250 on Tuesday, January 23, 2007 2:11 PM

 shows the Pyro as a 1/87 model, the mast was replaced with wood, and the oyster dredges were omitted.

   In 1/87 scale she is 50'-6" LWL, and 86'-3" LOA (sparred length). If built as 1/64 scale, 37'-3" LWL, and 63'-9" LOA. If memory serves, this is the range of dimensions typical of the type. The  Museum in St. Michaels Md. would be a good place to visit, for Chesapeake Bay workboat history.

 jtilley, Any time there's a chance to sail in an historic vessel, I highly recommend going for it. In 1969 I had the pleasure of sailing in Stephen Taber, a 68' two mast coastal schooner, built in Glen Head N.Y.,in 1871, for the brick trade. She's still sailing in the "dude" trade. I managed to get my hands on the "wheel", and sailed her for about four hours. Should age take my mind, I would hope that the last memory to go would be that sunny afternoon on Penobscot Bay.

Lead me not into temptation ..................I can find it myself

  • Member since
    May 2003
  • From: Greenville, NC
Posted by jtilley on Monday, January 22, 2007 11:15 PM

In the U.S. there's quite a bit of literature on the skipjack, which is generally referred to as "the last working sailing craft."  Years ago Howard I. Chapelle published a nice booklet called "Notes on Chesapeake Bay Skipjacks," which has been reprinted in various forms from time to time.  think it may have originally appeared as a series of articles in The American Neptune.  It's currently available in bound, paperback form from the Chesapeake Bay Maritime Museum (http://www.cbmm.org/wh_store_pubs.htmlI).  If you have any interest in such things, you'll enjoy playing around with that museum's website.   

Back in the early '80s Model Shipways released a beautiful, large-scale skipjack kit, based on Chapelle's plans for one named the Willie L. Bennett.  MS commissioned an excellent researcher and draftsman, Ben Lankford, to "flesh out" Chapelle's basic drawing into a remarkably detailed set of plans showing a skipjack fitted for dredging oysters as of the 1930s or thereabouts.  The kit is still available through Model Expo (http://www.modelexpoonline.com/).  I don't know whether Model Expo is willing to sell the plans separately or not, but I believe they've put the instruction manual online as a PDF file.  If I'm right about that, you can get at it by clicking on the Model Shipways icon on the home page, then scrolling down to the Willie L. Bennett kit and clicking on that.

Several authors and photographers have gotten interested in skipjacks and published books about them in recent years.  If you go to the website of the Barnes and Noble bookstore chain (http://www.bn.com/) and do a "keyword search" on the word "skipjack," you may be surprised at the number of hits you get. 

Skipjacks are beautiful boats, and make beautiful models.  Unfortunately the real skipjacks are almost gone.  I can remember when seventy or eighty of them were working the Bay's oyster beds; old timers can remember when they numbered in the hundreds.  Now there are fewer than a dozen. 

One of them, the Rebecca T. Ruarke, carries passengers on two-hour cruises around the upper Bay.  (Technically her status as a skipjack is slightly debatable; she has a round bilge, and is sometimes referred to as a "sloop rigged as a skipjack."  Above the waterline the distinction isn't particularly relevant.)  A couple of summers ago my wife and I spent a thoroughly delightful afternoon on board her.  Two of the other passengers steered, and I got to handle the jib.  It's ludicrously easy.  At the beginning of the season the captain puts a big knot in each jib sheet, and one in the main sheet, to let the sails set themselves at about the angle he thinks is usually right.  For the rest of the year it's just a matter of hauling and casting off the halyards.  At least it looks easy.  I got the jib up all right (though the last few feet of halyard took some heavy-duty hauling), but then noticed that the weather sheet was fouled on the knighthead.  When I reached down and cleared it I made another discovery:  that I was inadvertently standing with one foot on each side of the standing part of the sheet.  When the sheet came clear and the jib caught the wind - well, let's just say if I hadn't already been circumcised....

 That experience goes down as one of the top three ridiculous, nautically-related events of my life so far.  (The other two: the time I fell into the boating lake at Regent's Park, in London, and the time I got seasick lying on a waterbed in a furniture store.)

Youth, talent, hard work, and enthusiasm are no match for old age and treachery.

  • Member since
    March 2006
Posted by jwintjes on Monday, January 22, 2007 2:34 PM

Thanks, Ed - just what I was looking for!

Jorit 

  • Member since
    August 2005
  • From: Mansfield, TX
Posted by EdGrune on Monday, January 22, 2007 1:09 PM

See the drawings of the skipjack Kathryn at the US Library of Congress' Historic American Engineering website

 

http://memory.loc.gov/cgi-bin/ampage?collId=hhsheet&fileName=md/md1400/md1454/sheet/browse.db&action=browse&recNum=0&title2=KATHRYN-Two-sail%20Bateau%20%22Skipjack%22,%20Dogwood%20Harbor,%20Chesapeake%20Bay,%20Tilghman%20vicinity,%20Talbot%20County,%20MD&displayType=1&maxCols=2&itemLink=D?hh:11:./temp/~ammem_7BAx::

  • Member since
    March 2006
Pyro/Lindberg Skipjack Oyster Boat Q
Posted by jwintjes on Monday, January 22, 2007 12:42 PM

I recently got one of these kits, and apart from being quite positively surprised about the general quality of the parts, I'm now wondering where to find some reference material for it, particularly something that would be helpful in determining the scale of the model; judging from some fittings I would guess it's in the 1/87-1/76 range, but I'm not sure.

Perhaps someone could help me out here? 

Jorit 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.