X-15A-2 in 1/32nd scale….

Excellent work!

As a sometime paper modeler myself, I can see that some of the shapes on this one are really tough to do as cleanly and beautifully as you have done them. Very impressive to a tyro like myself!

Lookin' good! A model is a model, and this happens to be a good lookin' model :-)

Thanks for sharing and have a nice day

Paweł

That looks awesome!!!  Great job!!

One of the limitations cardmodelers face is replicating metallic finishes. They’re just hard to do with paper.

The external tanks on the X-15A-2 are prime examples. The tanks used on Flight 2-50-89 featured two different metallic finishes. A section of the left tank, as well as the rear dome, were very reflective silver with black circumferential stripes and a black spiral photo target stripe. A section of the right tank was a dull silver and had the black spiral photo target stripe. When my friend recolored the model’s tanks to represent this flight, he did a great job but there wasn’t much he could do about the metallic finishes except represent them in shades of gray. That’s how the model sat on my shelf since I finished it.

Over the weekend, I decided to do something about it. I covered the metallic sections with aluminum foil, using the foil’s shiny side for the left tank and the duller side for the right tank. The job required carefully cutting the tanks off the model, removing the plumbing and covering the metallic sections with foil. I used Microscale Metal Foil Adhesive to stick the foil pieces on. I used black Bare-Metal foil to replicate the black stripes.

After re-gluing the plumbing, I glued the tanks back on the model. I’m pleased with the improvement.

The last time I built an X-15 it didn't have very much detail, certainly nothing like that.

I remember seeing all sorts of things on display at the 1964 World's Fair from the new Mustang to the prototype cars like the turbine powered Firebirds to the Chrysler turbine cars.  They also had an X-15 on display at one pavilion but you were kept quite a distance from it.  It was one of the best things on display that I saw there.

OK, I'll say it WOW! That's some kind of modeling.

That's right, metal foil is the way to do it. Sometimes you can get paper models printed with silver paint, which is OK in some cases (like aircraft painted silver), sometimes when you want natural metal finish you have to go the way you did it. definitely an improvement, thanks for sharing and good luck with your next builds

Paweł

Pawel

That's right, metal foil is the way to do it. Sometimes you can get paper models printed with silver paint, which is OK in some cases (like aircraft painted silver), sometimes when you want natural metal finish you have to go the way you did it. definitely an improvement, thanks for sharing and good luck with your next builds

Paweł

 

When I built my X-15A-2 in white, I did use a metallic paper for the metallic sections of the external tanks.