SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

paint not drying!

1816 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
paint not drying!
Posted by Anonymous on Sunday, March 30, 2003 2:15 PM
I keep airbrusing my model Model Master enamel Olive Drab and I and I keep finding areas that don't dry. Please Help!
  • Member since
    November 2005
Posted by Anonymous on Sunday, March 30, 2003 6:21 PM
try acrylic, or try letting it dry for a long time (weeks)
  • Member since
    December 2002
  • From: USA
Posted by naplak on Sunday, March 30, 2003 8:48 PM
I use mostly acrylics and lacquers... both of which dry a lot faster than enamel. But I am not sure what would casue it to take way too long. DId you thin it enough?... but then... what IS enough?

Try varying the thinning some, and see what happens.
www.naplak.com/modeling ... a free site for modelers www.scalehobby.com/forum/index.php ... a nice Modeling Forum
  • Member since
    November 2005
Posted by Anonymous on Monday, March 31, 2003 2:01 PM
Had a similar problem once. Finally decided the paint was probably spoilt. Not only did it take almost forever to dry but it was glossy as well (it's supposed to be matt). Have you had that bottle of paint a long time? Maybe time to get a fresh supply.
  • Member since
    November 2005
Posted by Anonymous on Wednesday, April 2, 2003 10:05 AM
Just a thought. Are you putting the paint on vinyl or rubber? Enamel paints will not dry on this type of material?

M.
  • Member since
    January 2003
  • From: Foothills of Colorado
Posted by Hoser on Sunday, April 13, 2003 11:03 PM
Did you wash the model first? Sometimes the mold release on the plastic will intererfere w/ the paint. Use some Dawn dishwashing detergent and scrub it down well.
"Trust no one; even those people you know and trust." - Jack S. Margolis
  • Member since
    November 2005
Posted by Anonymous on Monday, April 14, 2003 3:23 AM
Hy.
wait for a few days, paint's drying speed depends on the weather.
Washng the model before painting is important. If the paint doesn't dry at all, your model isn't lost. With solvant you can clean it.

Tom.
http://perso.wanadoo.fr/toms-website/
  • Member since
    November 2005
Posted by Anonymous on Monday, April 14, 2003 8:11 AM
Temperature and humidity play a large roll in the curing process. Sometimes a basement or a work shop will be too cool and the humidity level high. Get the heat up a few notches. I had a dehumidifier in my basement at my previous house. My workshop was in the basement also and I had no problems.
  • Member since
    November 2005
Posted by Anonymous on Thursday, April 17, 2003 1:39 PM
It looks as if the paint your using is out of date.
If your paint is over its date the time to dry will increase, or it will never dry.
It happened to me with the radardish of my Sentry it took several days to dry.
So don't worry nothing is lost.
  • Member since
    February 2003
Posted by Jim Barton on Friday, April 18, 2003 3:38 PM
To paraphrase The Carpenters, "Rainy Days and Hot Days" may very well get your paint job down. I do a lot of brush painting and I've had paint do funny things on rainy days in the past, so needless to say, I won't paint (brush or spray can) on rainy days. (I don't have an airbrush, but if I did, I wouldn't use it when it rains.)

The same with hot days. If the inside of my apartment gets above 88 to 90 degrees, I won't paint. It dries too fast and I wind up with brush marks. When I spray paint, I take everything outside, but I wouldn't spray paint (or airbrush) during really hot weather.

"Whaddya mean 'Who's flying the plane?!' Nobody's flying the plane!"

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.