SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

I'm never masking with Scotch tape again!!!

1122 views
10 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2003
  • From: N.E. Ohio
Posted by dragonfly on Sunday, March 6, 2005 6:58 PM
My question is, how long was the tape on the canopy? If you don't get it off within a couple of days, you're gonna have problems. Also, try bare metal foil to mask canopy's.
Just lift the corner with a dull tooth pick, and pull it off with tweezers. Any residue can be removed with a q-tip moistened with mineral spirits.

dragonfly
  • Member since
    January 2004
  • From: Philomath, OR, USA
Posted by knight667 on Monday, February 28, 2005 2:28 PM
QUOTE: Originally posted by Jeeves

I use the Scotch Magic tape and have no problems-- I suggest using a wooden toothpick to scrape up an edge of the tape to use to grab with tweezers to pull it up-- the toothpick doesn't scratch the clear parts...


Sounds like it's just my ineptitude at this point. My hands shake like crazy when I'm working on small detail parts (something that's just started recently) and it makes it hard to get a good grip sometimes.

Thanks for all your feedback everyone!
John "The only easy day was yesterday." - US Navy SEALs "Improvise. Adapt. Overcome." - US Marine Corp. "I live each day/Like it's my last/...I never look back" - from "I'm A Rocker" by Judas Priest
  • Member since
    February 2003
  • From: Saratoga Springs, NY
Posted by Jeeves on Monday, February 28, 2005 1:03 PM
I use the Scotch Magic tape and have no problems-- I suggest using a wooden toothpick to scrape up an edge of the tape to use to grab with tweezers to pull it up-- the toothpick doesn't scratch the clear parts...
Mike
  • Member since
    November 2005
Posted by Anonymous on Monday, February 28, 2005 4:13 AM
Tamiya masking tape is definitely the way to go!! Reserve the Scotch for domestic painting. Cool [8D]
  • Member since
    January 2004
  • From: Philomath, OR, USA
Posted by knight667 on Wednesday, February 23, 2005 10:37 AM
I found Swanny's article on his site about masking canopies and I'm trying that right now...so far it works great! This is it for me from now on! Big Smile [:D]
http://www.swannysmodels.com/Canopies.html
John "The only easy day was yesterday." - US Navy SEALs "Improvise. Adapt. Overcome." - US Marine Corp. "I live each day/Like it's my last/...I never look back" - from "I'm A Rocker" by Judas Priest
  • Member since
    September 2004
  • From: Utereg
Posted by Borg R3-MC0 on Wednesday, February 23, 2005 9:13 AM
I used Scotch for masking before I was introduced to Tamiya tape. I hver only used Tamiya tape eversince.

  • Member since
    January 2004
  • From: Philomath, OR, USA
Posted by knight667 on Sunday, February 20, 2005 4:44 PM
QUOTE: Originally posted by rjkplasticmod

The tape didn't scratch the canopy, the X-acto did. You must be really careful using the X-acto to remove the tape.

Regards, Rick


Yeah, I know it was my knife that scratched it...the problem is that it didn't come up very well, hence the scratches. More care required on my part, no doubt there. Just seems like it's more trouble than it's worth for me. Disapprove [V]
John "The only easy day was yesterday." - US Navy SEALs "Improvise. Adapt. Overcome." - US Marine Corp. "I live each day/Like it's my last/...I never look back" - from "I'm A Rocker" by Judas Priest
  • Member since
    November 2005
Posted by Anonymous on Friday, February 18, 2005 10:01 PM
I try not to mix modeling and liquor.....or any products named after liquor.....Tongue [:P]Wink [;)]
  • Member since
    February 2003
  • From: A Spartan in the Wolverine State
Posted by rjkplasticmod on Friday, February 18, 2005 8:48 PM
The tape didn't scratch the canopy, the X-acto did. You must be really careful using the X-acto to remove the tape.

Regards, Rick
RICK At My Age, I've Seen It All, Done It All, But I Don't Remember It All...
  • Member since
    November 2005
Posted by Anonymous on Friday, February 18, 2005 7:01 PM
I only use scotch tape and tamiya tape for masking and its never been that much of a headache for me , I pick the corner so its sticking up and use tweezers to work my way along the edge lifting it , I don't start to pull it of until I have one edge lifted , then wih the tweezers grab the lifted edge and then slowly start to lift ..thats pretty much it for me ..I've also used tooth picks to help it wont scratch the clear parts..

cheers mike
  • Member since
    January 2004
  • From: Philomath, OR, USA
I'm never masking with Scotch tape again!!!
Posted by knight667 on Friday, February 18, 2005 4:03 PM
Okay, so I just finished up putting my final dullcote on a 1/48 SR-71 I'm doing for a friend. The a/c looks good, and I'm pretty pleased with it (as pleased as any of us are when we finish a project...there's always something that can be done better Big Smile [:D]).

But I digress. So I go to remove the masking from the canopy. Now granted, it's not a terribly difficult canopy to mask, but I thought I'd be different (my first error) and use Scotch tape, since I've had it work well once before...I usually use masking tape or liquid mask and have never had a problem with those.

So I go to take the masking off with a brand new #11 blade and my pointy-nose tweezers...and I wind up scratching the canopy. Aaaarggghh!!! Stupid Scotch tape! It took me the better part of 45 minutes to remove it all, because it flaked apart and disintegrated. I'm going back to my masking tape and liquid mask method (like what Swanny outlines on his site).

Anybody else have similar experiences/nightmares with Scotch tape?
John "The only easy day was yesterday." - US Navy SEALs "Improvise. Adapt. Overcome." - US Marine Corp. "I live each day/Like it's my last/...I never look back" - from "I'm A Rocker" by Judas Priest
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.