Find us on Youtube Find us on Facebook Follow us on Twitter Follow us on Pinterest Sign up for our email newsletter
See inside current issue of Finescale Modeler Magazine
See inside current issue of Finescale Modeler Magazine

THE MAGAZINE

        CONTACT US

          RECENT ARTICLES

          POPULAR TOPICS

          RECENT REVIEWS

          POPULAR TOPICS

            RECENT REVIEWS

            POPULAR TOPICS

              RECENT VIDEOS

              POPULAR TOPICS

                RECENT THREADS

                CATEGORIES

                  NEW PRODUCTS

                  OUR STORE

                    CURRENT ISSUE

                    See inside the current issue of Finescale Modeler Magazine

                        SEARCH FINESCALE.COM

                        Enter keywords or a search phrase below:

                        Search

                        Putty ... Am I doing something wrong?

                        634 views
                        4 replies
                        1 rating 2 rating 3 rating 4 rating 5 rating
                        Anonymous
                        • Member since
                          November 2005
                        Posted by Anonymous on Thursday, April 14, 2005 10:08 PM
                        hey, kinda off topic, but i think it may help u.... i use windscreen wiper bladews to apply putty. i just ca the wiper to the wiper backing, and cut it in2 5cm lenghts... works great on filling gaps,coz u can get off most of the excess!! i usually thin the putty just a little bit so its easier to work with
                        Report Abuse
                        Anonymous
                        • Member since
                          November 2005
                        Posted by Anonymous on Thursday, April 14, 2005 7:36 PM
                        Thanks bunches.

                        I figured I was doing something wrong. Now I know.

                        Yolev
                        Report Abuse
                        qmiester
                        • Member since
                          May 2003
                        • From: Central USA
                        Posted by qmiester on Thursday, April 14, 2005 7:23 PM
                        mm23t is probably correct. The only thing I currently use thinned putty on are sinkholes, hairline cracks and pinholes. Otherwise, I apply the putty as it comes from the tube. I use a small, flexible artists palatte knife. Another thing to remember is if you have a fairly large amont of putty to apply, apply several thin coats of putty (let each dry before applying the next) instead of one thick coat. The thick coat will usully shrink and crack while drying.
                        Quincy
                        Report Abuse
                        mm23t
                        • Member since
                          September 2004
                        • From: Tulsa, Oklahoma
                        Posted by mm23t on Thursday, April 14, 2005 6:53 PM
                        Yolev, you may be doing both, thinning too much and wiping the excess before it sets. I don't thin mine at all. I will tape off the area that I don't want any putty on, leaving just enough area to apply the putty. I use the phony credit cards that come in the mail for my applicator. These are cut down into strips as you don't need to use the entire card. When I apply the putty, I'll use the card to push the putty into the area the needs filled. Let dry and sand. You will receive more tricks from the other folks, you will just need to use the method that you feel comfy with. Good luck.

                        Medals are not "Won", they are "Earned".

                        Mike..

                         

                         

                        Report Abuse
                        Anonymous
                        • Member since
                          November 2005
                        Putty ... Am I doing something wrong?
                        Posted by Anonymous on Thursday, April 14, 2005 6:43 PM
                        Hello all.

                        I have been trying to fill gaps and a couple seams on an Italeri LAV-25 that I am working on. I am using Tamiya Putty, and I have thinned it with alcohol. It is taking three aplications to fill any gap bigger than a hair.

                        I have been using the method detailed here and from Swanny's site;
                        http://www.swannysmodels.com/Seams.html
                        I apply the putty then wipe off excess with acetone based nail polish remover. It looks great when I have finished, then the next day.... RETURN OF THE LIVING GAP!!! Argh!!

                        Have I thinned my putty too much? Am I wiping to much excess away? Is this just something that everyone knows, so nobody bothers to mention?

                        Thank you as always you have been a great help to me.
                        Yolev
                        Report Abuse
                        JOIN OUR COMMUNITY!

                        Our community is FREE to join. To participate you must either login or register for an account.

                        SEARCH FORUMS
                        FREE NEWSLETTER
                        SIGN UP
                        By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.
                          More great sites from Kalmbach Media
                            Terms Of Use | Privacy Policy | Copyright Policy