SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

New spray booth area in Hobby room

1087 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Sunday, November 30, 2003 11:10 AM
Nice setup you have there. Thumbs Up [tup]

Mike

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    November 2005
Posted by Anonymous on Sunday, November 30, 2003 8:59 AM
This might be a larger photo - the inside of the booth is a bit overexposed due to the lights being on in the booth and the flash from the camera. There is a panther inside the booth.

  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Saturday, November 29, 2003 11:19 PM
David,

That link says it is Forbidden. Big Smile [:D]

Mike

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    December 2002
  • From: Waukesha, WI
Posted by David Voss on Saturday, November 29, 2003 10:54 PM
For some reason the very tall images aren't clickable, but click here for the full size image so you can get a better look at his setup. Smile [:)]
David Voss Senior Web Developer Kalmbach Publishing Co. Join me on the FSM Map
  • Member since
    November 2005
Posted by Anonymous on Saturday, November 29, 2003 9:15 PM
Looks like a nice spraybooth area! Thanks for sharing!
  • Member since
    January 2003
  • From: NE Georgia
Posted by Keyworth on Saturday, November 29, 2003 8:51 PM
Setup looks good. Hope you have many hours of modelling there.
"There's no problem that can't be solved with a suitable application of high explosives"
  • Member since
    January 2003
Posted by shermanfreak on Saturday, November 29, 2003 8:35 PM
Looks like a nice little set-up .... should serve you well.
Happy Modelling and God Bless Robert
  • Member since
    November 2005
New spray booth area in Hobby room
Posted by Anonymous on Saturday, November 29, 2003 8:30 PM
Well the spray booth, air brush and compressor are all set up in the new hobby room. I was able to get a nice deal on the Paasche spray booth on ebay. I placed two lights on the outside of the unit pointing in and a slim fixture inside. I cover about 40% of the open with plastic wrap to increase the draft - the window is plexiglass and vents right out to the window well.

I all purchased an iwata brush and the power jet compressor. Not sure if the photo will load here or how large it is.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.