SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Best way to clean paint off of a windshield.

2290 views
10 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2007
  • From: Germantown, Wisc.
Best way to clean paint off of a windshield.
Posted by Hartmann352 on Friday, March 6, 2009 3:12 PM

Hey there Folks,

 Friend of mine is building a 1969 Dodge 440 Six pack. Inadvertantly the clear part that is the front & rear windshields got a whole mess of paint on it...what is the best way to clean off the paint w/o damaging the part itself?

Thanks in advance.

Make a Toast [#toast], Dave.

"Yesterday is history, Tomorrow a mystery, but Today is a gift. That is why it is called the "present".

 

 

  • Member since
    June 2006
  • From: Westerville, Ohio
Posted by Air Master Modeler on Friday, March 6, 2009 3:16 PM
What type of paint was spilled, enamel or acrylic?

Rand

30 years experience building plastic models.

WIP: Revell F-14B Tomcat, backdating to F-14A VF-32 1989 Gulf Of Sidra MiG-23 Killer "Gypsy 207".

  • Member since
    June 2007
  • From: Germantown, Wisc.
Posted by Hartmann352 on Friday, March 6, 2009 3:20 PM
Sorry, should have included that...it's enamel....and it was Futured already.

"Yesterday is history, Tomorrow a mystery, but Today is a gift. That is why it is called the "present".

 

 

  • Member since
    June 2006
  • From: Westerville, Ohio
Posted by Air Master Modeler on Friday, March 6, 2009 3:37 PM

Try NON Acetone nail polish remover. If it fogs the clear part brush some Future over it to make it clear again.  

Rand

30 years experience building plastic models.

WIP: Revell F-14B Tomcat, backdating to F-14A VF-32 1989 Gulf Of Sidra MiG-23 Killer "Gypsy 207".

  • Member since
    January 2005
  • From: Cave City, KY
Posted by Watchmann on Friday, March 6, 2009 4:01 PM
You can also polish clear parts with paste toothpaste and a Q-Tip.  I've removed small amounts of paint with toothpaste.
  • Member since
    August 2007
  • From: Southeast Wisconsin
Posted by MaxSheridan on Friday, March 6, 2009 8:02 PM

If it was futured already, you should be able to remove it with windex. You will have to re-future it though, since the windex will remove the future.

 

-Mark

  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Saturday, March 7, 2009 12:00 PM
 MaxSheridan wrote:

If it was futured already, you should be able to remove it with windex. You will have to re-future it though, since the windex will remove the future.

 

Windex will not remove enamels as far as I know. 

Hartmann352, have your friend buy a can of the yellow Easy-Off oven cleaner. 

The reason I say, "yellow" is because it is the original formula. The other one that says, "no fumes" does not work near as well.

Spray it on the windshield and put it into a zip lock baggie for a few hours and respray if necessary. Use a soft toothbrush and scrub the old paint off the windshield and rinse well with water. 

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    August 2007
  • From: Southeast Wisconsin
Posted by MaxSheridan on Saturday, March 7, 2009 9:38 PM
 MikeV wrote:

Windex will not remove enamels as far as I know.  

 

The reason I believe windex will work is because he said the windshield had already been futured. If that was the case, the windex will remove the future and the enamel paint which is just sitting on the future without harming the plastic. I could be wrong, but it seems logical. Besides, oven cleaner costs money, and I'm cheap!Big Smile [:D]

 

-Mark

  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Sunday, March 8, 2009 12:35 AM
Well Mark, if he does as I told him the Easy-Off will remove both the Future and the enamel paint, so problem resolved. Big Smile [:D]

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    December 2002
Posted by tyamada on Sunday, March 8, 2009 11:24 AM

Alcohol will remove Future, enamel, lacquer and latex paint.  No need to use caustic chemicals like Easy Off.

You can soak the part or use a cloth dipped in alcohol and rub on the paint, it will eventually remove the paint.

  • Member since
    February 2003
  • From: Green Bay, WI USA
Posted by echolmberg on Wednesday, March 11, 2009 8:56 AM

I accidentally got some Model Master enamel on a P-51 canopy which I had Futured a few days before.  I just took a napkin dipped in good ol' mineral spirits and wiped the paint clean off.  A little washing with some dish soap and the canopy was back to sparkling again.

Eric

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.