SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Where do you do your painting?

837 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • From: Halfway back to where I started
Posted by ckfredrickson on Sunday, March 29, 2009 2:11 PM

Haven't painted in a while, but I've got an Artograph 1520 booth set up in a closet.  I installed a shelf at a height where it's more comfortable to use while standing.  I'd rather put it out in the room and closer to my work area, but I'm an apartment dweller and don't have the space for it.

The Artograph has filters so I consider it acceptable to paint without outside ventilation in limited quantities and preferably with acrylics, though I have used enamels. 

I strongly recommend using ventilation where available, but if it's not available, I would strongly recommend the purchase of a system with adequate filters (my system has charcoal filters, though I sometimes question their adequacy)

Couple other hints: 

* I use a cookie sheet move paints, airbrush, and other supplies between the desk and the painting area all at once rather than having to move back and forth.  When done painting I move the cookie sheet back to my desk and use it as a cleaning area.  That way if anyting spills, it stays contained.

* I installed a keyboard drawer underneath the shelf my booth sits on for the cookie tray as a sort of storage area while painting.

  • Member since
    November 2012
Posted by dioramator on Sunday, March 29, 2009 7:11 AM

heres my home made spray booth.

Photobucket" border="0" />

  • Member since
    February 2009
  • From: Fort Richardson, Alaska
Posted by IHATEALASKA on Saturday, March 28, 2009 8:14 PM
I just hold the part over a trash can.  Makes one heck of a mess but not to bad.  I got an old cardboard box too.
Keep The Powder Dry
  • Member since
    January 2009
  • From: hamburg michigan
Posted by fermis on Saturday, March 28, 2009 1:43 AM
 I built a 3'x2' spraybox out of some scrap plywood and 2x4s. I had a small plugin flourecent light I screwed in there and bought a $15 fart fan to "de-fume". maybe one of these days I'll get around to running its own exaust vent. I have to carry the hulk over to the dryer to connect the tube.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Saturday, March 28, 2009 1:25 AM

I have had my painting area set up in the garage of my house for the past 15 years. I open the roll up door when I use my airbrush, that takes care of any fumes. Before that I was in rooms where I could airbrush next to an open sliding glass door. I have never used a fan or spray booth to clear out fumes.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    March 2009
  • From: Sonoma, CA
Where do you do your painting?
Posted by cuzimthedad on Friday, March 27, 2009 11:24 PM

I'm in the early stages of setting things up and have an upstairs guy room which I plan on installing a hobby work table in. I see photos of spray folks airbrushing on tabletops and spray booths but haven't a clue as to where they are set up. I plan on putting the table in front of a sliding window and making an insert to allow an exhaust pipe from a booth to run to.

So, do you always spray your parts in a booth and if not, how do you exhaust if spraying in an open room ? I hope I made myself clear. If not I'll try and explain it better. 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.