Paint Help

Do you have a door on your booth? Even a drop cloth taped to the front will help. I have plexi doors on mine and I leave the fan running while it dries for at least 1/2 an hour.

Making sure it's been vacuumed before painting helps a LOT, as does spritzing the booth down with a light mist of water just before spraying. That helps to knock the dust out of the air.

Placing a container over top of the model after painting also works.

no door on it but i can make something up.,it does vaccum out, should i let it run a little bit b4 painting and airbrushing?

Certainly wouldn't hurt. I find giving the interior a quick spritz of plain water helps immensely.

Something I read here or in another forum: get a breeze box fan and fasten a permanent furnace filter (Home depot carries them) to the intake side. Run this for about an hour inside the room before painting. It works, even if I haven't dusted and vacuumed the work room for awhile.

Another thing that helps, especially in the colder, drier months of the year, is to keep the relative humidity between 50 and 60 percent, or at least as close to that as  you can.

Absolutely run the booth for at least fifteen minutes before starting to paint, then mist the air in the room, wait a few minutes, then paint. Turn off the booth as soon as you are done cleaning the brush, and cover the model until it is tack free.

i can cover them with these medium sized storage containers i bought thanks guys for the help.

Check your attire as well ,do all the above by all means and spritze your self as well.I will run the booth and using a midsize compressor blow air onto and into all the area and equipment. Ten wet all the relevant areas and your front and sleeves especially.Then paint ,put the item away and dont breath around it! Painting to perfection is quite tedious- any body man or custom painter will tell you the prep is 90% the painting is only 10%

yes i know what u mean by tedious i hate seem line so i rid of all of them takes a whole to do but well worth it ill try all the spritzing and all tips u guys helped me with