Looking 4 1st Airbrush

glad your happy...

Just tried my Iwata hp-cs. All I can say is GET IT!!!!!!![

Tweety1,thanks for advise.I only use enamels any laquers I have allways used in spary cans or brush.Laquers have a tendience to gum up or gel.Back flushing is only done once nozzel is cleaned,then I q-tip the rest clean.Digger

The Aztek I use to use had the same nozzle attached to it for 2 years (the tan coloured one), was pulled apart only once to be cleaned, and sprayed everything, enamels, acrylics and laquers.

Diggeraone, DO NOT run any laquers through your Aztek or else it WILL die a loathsome death. Thats what killed mine after a month of laquerage.

Second thing about Azteks, DO NOT backflush them, or else you WILL end up with paint all through the air/paint mech, and wind up having the same problem most have had.

Other than that, mine worked a treat for more models than I can remember.

They ain't that bad, and I'd gladly buy another if the price here was cheaper

well I will have to wait and see with my aztec if these problem accure.As for the nozzles I can buy them for $8 as well at hobby lobby.Digger

aztek parts are fscking expensive: nozzle: $15 compared to $8 badger needles. why do sailsmen always ttry to get us to buy aztek?

Yeah, I used to believe in Aztek. Untill this!
http://www.finescale.com/fsm/community/forum/topic.asp?TOPIC_ID=15957

As for me even thou most of these people said no to aztec,I got one.I am very well plased with it.1 for the interchangible nozzles the others reqiure a lot of t.l.c. with the needles.The nozzles are inexpinivse and are easy to clean.2 a lot hobby shops have parts for this type of air gun and can be double action depending what type you get .
For me it is more econoimical,I have found that places like hobby lobby has a lot of
pieces for the aztec and at a good price.Digger

I have one of those Revolution airbrushes, and I like it quite a bit. It does the job quite well, and I even managed to put a freehand cammo job on a 1/72 Spitfire with it. Not much it can't do.

I still want an illustration airbrush though.


Hey Chris, does your wife get irritated with you about buying more airbrushes than you need?

yeah, youl love it

the iwata will definetly be a great purchase. let me know how it works and i may just order me one soon. later.

I was also looking for my 1st decent airbrush. My first airbrush was a Testors plastic cheepie. I was leaning towards the Aztec because of the interchangeable tips. After reading these forums I decided to go with the Iwata Revolution. The price was very reasonable and think I will be happy with it. I'll let you all know.

10/4. that just gives me an excuse josh. punks are aggrevating. sorry to hear that. later.

I'd be interested to see how you feel the Revolution compares to the CS and the Omni. I love comparisons like that. I still haven't gotten an illustration airbrush and Silentaire compressor yet either. I had to spend that money on computer parts and getting Claire's car fixed after those punk spoiled rich kids stole it. It's always something

We keep soldiering on though.

QUOTE: WHAT???? After all that noise we had to listen to about that Iwata HP-CS you are still touting the Omni??? For shame! Just kidding!

this is an old thread scott! those were the pre-iwata days. i still love my omni 5000 though. i spray all my alclad lacquers through it as to keep my iwata's clear of enamels.

im the opposite of you armor master, i want the best to tinker and learn with. theres no use in getting used to a mule when you can ride a stallion to begin with!! ofcourse this depends on your budget. omni and iwata are among the best because these are the only two double action companys ive tried. both make superior airbrushes. i have the omni 5000 which is only about a half a notch under my iwata hp-cs and hp-c and all are excellent airbrushes that i plan to use extensively. among the 3, the iwata hp-c is my favorite with the .4mm n/n combo. in a few months, heck, ill probably purchase the iwata revolution with the .5mm n/n combo just to round out the iwata line. later.

QUOTE: originally posted by maddafinga Absolutely go double action

Agree 100%! If you want an airbrush that has good results and great durability, go Iwata or Bagder. But for the love of everything good and holy, don't get an AZTEK for that purpose (please don't!) If you want something where you can learn the typical characteristics of an airbrush and basically learn how to use one and learn how paint works in an AB, then (I can't believe I'm sayin this) get an Aztek. Please understand what I'm saying here everyone. If you want an AB that will teach you how to use one and teach you the characteristics of paint in an AB (basically a AB you learn on and YOU PLAN on getting another better AB later) then get an Aztek. But if you want an AB that you plan on keeping for a long time and this is what you saved up for and don't plan on getting another AB for a long time, then get something high quality like bagder or Iwata. Aztek is something you (as I did) can learn on and junk around with, but Iwata or bagder are high quality and it's kinda overkill to give a beginner an AB like that. But if you want to buy an AB and thats it for a long time, then I recomend you learn and master your skills on an Iwata or Bagder. It all depends on how much money you have or are willing to spend for a long term AB or something you can learn on, and get a new higher quality one later.

QUOTE: Originally posted by 9x19mm Anyone have a paasche VSR90 if so how do you like it?

I owned one once that is : I bought it, I used once, I thought it was a piece of crap, and I sold it; on the other hand, you should not listen to me, as I think that Aztek are fair airbrushes and I still own one although I prefer German airbrushes at this time.

Anyone have a paasche VSR90 if so how do you like it?

so in a way, its actually cheaper! and its altogether better

I have an Iwata bs gravity feed and i really love it to me i´t's perfect.
Buying a good airbrush lika a Iwata will be more expensive but you wont regret it!

yah, thats what im going to do... probubly. then buy a badger 100 or 200 or tamiya hg-sf in addition to my iwata hp-c

QUOTE: Originally posted by 1337 i dont like aztek at all...hate them infact. i wish i just bought a badger instead

Sell it on Ebay then and buy something else.

Mike

i dont like aztek at all...hate them infact. i wish i just bought a badger instead

QUOTE: Originally posted by saltydog i have an omni 5000 gravity feed ab and i absolutely love it.

WHAT???? After all that noise we had to listen to about that Iwata HP-CS you are still touting the Omni??? For shame! Just kidding!

I agree though. I've got a Badger 200 and Omni 3000. I use the 200 for "General Coverage" and the Omni for everything else. The 200 is a little easier to clean, and I tend to overclean my brushes by completely disassembling them at the end of a painting day.

I feel like I have a lot more control with the double-action Omni than I do with the single-action 200 and would never try to paint something tricky with anything other than my DA brush.

dont go aztek. lots of people made that mistake...

i would buy an iwata revolution cr... its perfect! if you dont like duels go with revolution sar... dun like it tho

Greg: You would not go wrong in buying an Iwata Eclipse BCS. This is an outstanding double action airbrush. Easy to use, clean and maintain. In my opinion it is the best all around airbrush for model builders.

Mike

Greg, ...hey nice name!

Read my last recent post to another modeler who was looking for his first airbrush.

http://www.finescale.com/fsm/community/forum/topic.asp?TOPIC_ID=13072

Greg,

Then I would agree with the other posts and get a double-action model.
Many people like gravity feed models and others prefer the siphon feed models. If you like the gravity feed models then I would look at the Omni 4000, Eclipse CS, or the Revolution CR. If you like the idea of different sized color cups and bottles then go with a siphon feed model such as the Omni 3000, Anthem, Vega 2000, Eclipse BCS, or Revolution BCR.
The Paasche VL, Crescendo and a few others are also popular.
The gravity feed models are capable of spraying at a little lower pressure and are easier for some people to achieve fine lines with less overspray although I don't see a big difference. The siphon-feed models are faster at color changes if you need to go to several colors at one sitting because you can just pull the color cup off, spray some thinner through the brush and put another color cup back on with a different color. If you decide to use your airbrush for other things that require more paint then the siphon feed would also be the better choice in that manner because you can attach anything from a 1/4 oz color cup to a 3 oz. jar on them.

Mike

QUOTE: Originally posted by MikeV Greg, What are you going to use tha airbrush for? Aircraft, cars, tanks? Mike

Mike,

I model primarily aircraft (WWII-present) but am getting into armored vehicles as well.

Greg