SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Getting paint off canopy

1185 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2006
  • From: Edmonton, Alberta, CANADA
Getting paint off canopy
Posted by rookie 104 on Tuesday, November 16, 2010 4:59 PM

I am working on a 1/48 Hasegawa Hornet and got some spray can oilbase paint on the inside of the canopy. I had put liquid mask on it first but somehow some paint still got on -  what's the best thing to use to remove it? Will turpentine make the canopy go hazy?

Thanks

rookie 104

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Wednesday, November 17, 2010 4:56 AM

Dunno about turpentine, but enamel thinner won't attack it.. Although, it may not lift the paint either.. I'd strip all the paint off and try again... There's a product called Green Magic that works great for lifting enamel paints... Just soak your canopy in it full-strength overnight..

  • Member since
    January 2003
  • From: Hancock, Me USA
Posted by p38jl on Wednesday, November 17, 2010 10:18 AM

here's another trick.. depending how much paint you got on it..

use a cuticle stick( hard wood nail stick with a point on one end, and a chisel point on the other)

also a hardwood toothpick can work,,

use the point, or chisel end to scrape the paint off,( like your erasing with a pencil eraser) if the canopy is not a soft material, it works good. The hardwood will usually scrape the paint off and not leave a mark, make sure the stick is clean.. If it does mark it, you can buff it out and Future it..

This works good for cleaning up the lines around the edges of the framing, just trace the frame edges and you get nice crisp edges with little to no marks,, and a light buff or dab of Future hides any blemishes..

I hand paint my canopy frames most of the time, clean the edges with the cuticle stick,, and done.. lot less time than masking...

 

[Photobucket]

  • Member since
    February 2003
  • From: Rothesay, NB Canada
Posted by VanceCrozier on Wednesday, November 17, 2010 10:22 AM

toothpicks, skewers, I've got a couple of pointy wooden things that I bring out for cleaning up around canopy frames, etc. They do work pretty well as long as you go slow, and they seem to work best if the paint hasn't completely cured.

If you've got overspray, rather than a little leakage, you're probably better off trying to strip it all off as Hans mentioned.

On the bench: Airfix 1/72 Wildcat; Airfix 1/72 Vampire T11; Airfix 1/72 Fouga Magister

  • Member since
    September 2006
  • From: Edmonton, Alberta, CANADA
Posted by rookie 104 on Wednesday, November 17, 2010 3:08 PM

Thanks a lot fellows, I will try that method.

Regards  rookie104

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.